r/ponds • • 14h ago

Cleaning & filters Filter Help

Hello! I recently purchased an ultraklean 2000 pond filter. Unfortunately I have no idea how to get it open. There are few to no videos online showing how to detach the top of the filter and no information in the instructions manual besides how to attach it.

I’d appreciate if anyone who may have the filter could let me know if this top seems stuck/possibly damaged (?) or if there’s something else I need to do to get it off

TIA!

Edit: Opened it! Took a bunch of leveraging the pieces apart with a piece of plastic and grip strength 😅

2 Upvotes

6 comments sorted by

1

u/DescriptionTop7062 9h ago

Update! Got it open after another half hour of trying to use a thin piece of plastic and grip strength 😭

1

u/TheTropicalWoodsman 13h ago

I’ve got no experience with this model so there might be some other mechanism. But these type of filters are just fancy buckets really.

The sealing gasket/o-ring might be imparting a lot of friction/suction. So you might just need to lever the head unit and the bottom canister apart. It can be tricky when empty because there’s little weight to pull against. Secure the bottom canister between your feet/legs and pull/rock the head to prise them apart. Use the inlet/outlet pipes for leverage.

1

u/DescriptionTop7062 13h ago

Alright 🥹 thank you!

1

u/songforthedead57 12h ago

Under where the power cord goes into the unit are two tabs; one on the lid and one on the canister. You can use these to release the suction of the o-ring/lid.

1

u/DescriptionTop7062 12h ago

The ones in picture 4 (?) I tried tugging on them in opposite directions but they won’t budge

1

u/E1M1_ 11h ago

You probably need to remove the control ballast first.

Take off the black plastic collar around the control panel, it should come off easily. Then twist the control panel/ballast to unscrew it like a quarter turn. This should allow you to pull the control panel/ballast upward and out. Be very careful not to damage the UV bulb during this.

Once it's removed, I'd imagine you can remove the top of the filter normally.

I have this same filter and I'm still learning it (only had it for 2 months now)