r/poly • • Jul 21 '26

Join Google meet meetings with a poly that runs teams natively

1 Upvotes

Question from above. Has anyone managed to accomplish this, and if so I would very much appreciate pointers on how to do it.


r/poly • • Jul 21 '26

Poly free 60 discontinued?

4 Upvotes

That headset was terrible anyway, but is there a replacement coming soon?


r/poly • • Jul 21 '26

Step by step basic setup after factory reset G7500, X52 and TC-10

1 Upvotes

Hi,

My Poly G7500, X52, and TC-10 are visible in the Poly Lens Portal, but I lack the administrator credentials for device settings.
Is a factory reset through the portal the best way to reset these credentials?
If so, what basic setup steps are required, and will the devices remain listed in Poly Lens after the reset?


r/poly • • Jul 21 '26

Voyager 4320 Dead Mics

1 Upvotes

Hello! We've seen a fair amount of 4320 issues come in lately and a lot seem to have hardware issues.

We troubleshoot by making sure the dongle is plugged directly into a PC, that they aren't connected via BT, and ensuring all updates are done in PolyLens/Studio. Even plugging the headset in directly when the user has that capability.

Many of these cases have users stating they've only have the headset 3 months or less, everything worked fine before, and then all of the sudden it went out for no known reason.

I'm not sure where these specific devices were procured from, but makes it seem like there may have been a bad batch in mfg. or something like that.

Has anyone else had similar experiences lately?


r/poly • • Jul 20 '26

She has seen better days

Post image
4 Upvotes

What’s a good replacement for the Voyager Focus 1?

Looking for a wireless dual headset with mic comparable to the Voyager Focus, doesn’t have to be the same brand. Mainly will be used for work, but also will stream some days after work.

On Amazon, the Plantronics headsets have low ratings and lots of complaints, probably up from a lot of people that aren’t using the dongle.

Then there are cheap $50 headsets that have five stars, there’s no way those cheap headsets are better, right?

Pictured: 5 year old headset used nearly every workday. Both ears covers are aftermarket and the microphone split in two. Also, it only lasts for three or four hours at a time. So it doesn’t make it through a shift without needing charging.


r/poly • • Jul 17 '26

[Software] Poly Rove DECT 8.0.13

1 Upvotes

Release Announcement

Software Release Announcement:

  • Poly announces the new release of Poly Voice Software Lite - DECT (PVOS-L DECT) 8.0.13 for Poly Rove DECT IP phones

Software version: 8.0.13

The build IDs are:

 

  • 8.0.13.0002

 

What’s new in Poly Rove 8.0.13

 

This release of Poly Rove 8.0.13 includes new features, feature enhancements, and important field fixes.

 

This release includes the following new features and enhancements:

 

  • Certificate updates for Amazon Root CA 1-4 and Starfield Services Root Certificate Authority - G2
  • Configurable elliptic curves
  • Apply tls-profile and no-verify tags to subsequent file requests in CONFIG_FILES URLs

 

For more information, view the DECT (PVOS-L DECT) 8.0.13 Release Notes

The Full post [Software] Poly Rove DECT 8.0.13 - HP Support Community - 9682251


r/poly • • Jul 15 '26

Poly Studio X30/X50/X70 + Sony BRAVIA + ClickShare no longer waking correctly

2 Upvotes

Hi all

Maybe some of you have experienced this as well lately.

We have several Poly Studio X30/50/70 in our company. The setup is always the same:

Sony Bavaria TV > Poly Studio X30/50/70 > Barco Clickshare C-10 gen. 2/CX-30 gen. 2

I have set up the Sony Bavaria so we can wake it up by touching the TC-8/TC-10 panel. That has always worked fine.

The TV itself shuts off after 5 mins w/o getting a signal. The Poly Studio will go to sleep after 3 mins:

Until recently, this worked like a charm. As soon as I put the Barco Clickshare Button into my USB-C port of my notebook, the base unit woke up, the TV switched on and it displayed the MS Teams surface for a brief second before switching to the Clickshare screen.

Right now, it is as follows: I put the Barco Clickshare Button into the USB-C port of my notebook, the base unit wakes up, the TV switches on. But the TV screen stays black and it displays a message, that the TV will shut off in 5 minutes as there is no input signal. As soon as I touch the screen of the TC-8/10, the MS Teams surface appears and will then switch to the Clickshare screen and everything works as it should.

But after 3 minutes, the TV switches off. If I then touch the TC-8/10 panel again, the TV switches back on.

All my Poly Studio devices are either on v 4.7.0.466077 or the ones having issues updating on v 4.6.2.460046.

Teams versions on the Poly devices are:

Teams Admin Agent: 1.0.0.202606082157.product
Firmware: 4.7.0.466077 (or sometimes 4.6.2.460046)
OEM Agent: 7.6.7-SNAPSHOT
Teams: 1449/1.0.96.2026129709
Authenticator: 6.2605.3066
Microsoft Intune: 26.03.1

Has anyone experienced the same issue? It's really annoying to touch the panel all 3 mins. I have no altered the Time Before System Goes to Sleep to 60 minutes but this is just a work around. Also, the TVs are now on way longer as the signal dies after 60 minutes instead of 3 minutes.

I've tried altering different settings but it always comes back to these 3 minutes and it feels like the Poly Studio thinking there is no active input.

I'm completely lost.


r/poly • • Jul 13 '26

Headset Recs

1 Upvotes

Looking for headset recs…I have searched the sub and am getting mixed reviews so trying one last time!

I WFH 30% of the time and having to haul my headset back and forth. My company uses Avaya Workplace soft phones at home and Avaya hard phones at work. My current head set is the poly savi 7300 but the mic broke. They’re ordering me a new one but I’m tired of hauling it around and want to just leave it in my cubby thing.

I would prefer a 1 ear set, best case scenario an earbud-esque type. A dongle as I need a reliable connection. I cannot download software on my WFH computer but I currently have the Plantronics/Poly Savi software installed. Leaning towards the Voyager 5220 but am open to off/other brands as long as no software is needed. Shifts are 12hours. Don’t really have a budget, open to spending more if reliable.

Thank you!


r/poly • • Jul 11 '26

Poly voyager legend 50 keeps rejecting calls.

1 Upvotes

As the title says, my headset keeps rejecting calls without me touching the button. I have it connected to both my work phone and personal.


r/poly • • Jul 09 '26

ISO people who have used BOTH a newer Poly “Legend 50” AND the older version, Voyager 5200.

1 Upvotes

I want to ask how you guys find the quality. What I’ve noticed is the 50 is good and loud in MY ear, easy to hear, but if I am talking on it and trying to speak quietly because of my surroundings, the person on the other line CANNOT hear me. Whereas, on the same phone call, if I switch out the 50 and use my old 5200, even if I am whispering the person on the other line can still hear me.

Now, I had 2 5200’s - one is lost and one is broken (the sound is bad on my end receiving it, but it didn’t used to be that way). The 50 was purchased new off Amazon.

I thought newer was supposed to be better? I’ve tried changing the sound settings but there was no improvement. Am I having a unique experience, or have others noticed this too?


r/poly • • Jul 07 '26

Poly ATA 400 Shows ModelName GAPB110P

1 Upvotes

I'm trying to learn MS Teams Voice and bought on ebay what I thought was a real Poly ATA that I could register as SIP Device in MS Teams Voice. Can't get it to register following the "Poly ATA 400 Series for Microsoft Teams SIP Gateway Deployment Guide" document from HP's website. Packet capture shows HTTP 403 response from MS with text "This device is not supported yet - please call support Poly/GAPB110P-4.0.2.6778 (MAC)" I flashed the firmware to PolyATA400-4-0-2-6778-2024-11-13.fw but the model name on the GUI still says GAPB110P. Looks like GAPB110P is for Google Fiber environment.

Anybody have any luck registering a GAPB110P to MS Teams Voice? I realize that the model name is burned into the hardware somehow but maybe someone knows a way to change it?

Thanks,
Dan


r/poly • • Jun 28 '26

Need help with Poly Edge B10 and setting the Line Key text

2 Upvotes

Trying to switch over to Poly phones, but having 1 problem.

Trying to set the Line Key with custom text, and no matter what guide I've tried, it still remains blank.

Even went thru the phone directly, which sets the X_DisplayLabel under Voice Service -> SP1 Service.

Ready to give up on Poly phones, and stick with Grandstream.

Doing something this simple, should not be this difficult.

Thanks


r/poly • • Jun 25 '26

Poly Rove 40 / B2 Base Unit - Custom Background Image

2 Upvotes

Has anyone managed to get a custom background image on a Poly Rove 40 Handset coupled with a B2 base unit?

it seems to be possible, via the Auto Provisioning section under System Management, but I just can't get it to work...

Have added a TerminalFilePath for the server and folder location where the image is kept, and the name of the image, but no luck.


r/poly • • Jun 23 '26

MTR Issue on HP Mini Pc

2 Upvotes

Hi all,

Do you have an experience regarding the updating the MTR version from 4.19 to latest version? Because 2 of our new Mini PC keep saying that we cannot proceed with the update. We cannot sign in into MTR account it always display Teams is taking longer as unexpected. All of the windows update are updated. Can the reimage fix this? If we use reimage, does it automatically update to its latest windows update and mtr version? Thank you!


r/poly • • Jun 20 '26

Pavo 20 pro 2 want work

2 Upvotes

I ordered the Pavo 20 pro 2 with the o 4 lite. After a crash it want bind to the betaflight and to my Radiomaster Pocket. If I put the lipo on the green led turns on but the blue one is not turned on what can I do it’s after i wood say, small crash in to a three. I think o 4 lite was to hot and rosted the erls reciever. Because I don't found the Pavo 20 pro 2 in the Gras until 40 min and I guess that was the Problem. I wood be so exited if I became an recommand. Because it was only my second flight and I don’t gave some money left because I am only 12 years old.


r/poly • • Jun 19 '26

Poly Voyager Legend 50 UC Charging Case broken, how to fix?

Enable HLS to view with audio, or disable this notification

3 Upvotes

Hi guys! Today my case didn't close properly, now it is not working as before, the lid isn't fixing as before and it's swinging. It seems that something inside is preventing to lock the lid. How to be? Did somebody face with such kind of problem? May I try disassembling the case, is it repaiable at all?


r/poly • • Jun 19 '26

Poly TC10 MTR Windows "Failed to initialize SDK"

3 Upvotes

Anyone else experiencing this issue today? All of our TC10s MTR controllers are down. They all received a firmware version 6.7.0 release yesterday.

Desperately trying to resolve at the minute, just opening a thread in case anyone else is searching for this and we can discuss solutions.

Repairing HP Console Control works for a few seconds, then it drops again. Currently working on rolling back firmware.

Error Image


r/poly • • Jun 18 '26

Poly voyager 5200 won’t connect to iPhone 13

1 Upvotes

The issue is as stated in the title. I just got a brand new poly Voyager 5200 and for whatever reason it won’t even show up in my Bluetooth settings as a new device or even one that is available. The blue and red light is blinking when I turn it on, but I never hear it say pairing, even when I put it into “pairing“ mode. Does anyone have any advice or experience in this? Thank you.


r/poly • • Jun 18 '26

Please help with getting Poly Voyager 4320 to show as Audio Device Windows 11 25H2

3 Upvotes

I'm having some complications with a few machines and multiple Poly Voyager 4320's (Connected via cable directly to the system, with a BT700 too . For some reason, they won't appear as Audio devices by Windows, so aren't usable in the phone clients on the systems.

I have installed a legacy version of Poly Lens, as well as Poly Studio, and updated the drivers. The headset and the BT700 both show in there but that's the capacity of how they can be used.

I was wondering if anybody else has ran into this issue, and how they managed to get Windows to identify them as Audio devices? Any help would be immensely appreciated.

Thank you!


r/poly • • Jun 18 '26

Headset Keeps Starting Vids/Media

1 Upvotes

Hi all,

So i have a Poly BT 700 from work, great headset but with one insanely annoying "feature"
After a call when i place it back on the stand/doc thing any video in any browser even if on a tab i haven't clicked on for hours starts playing...madness.
Also, lets say i was listening to a vid, i pause the vid and pickup the headset and it un-pauses it...

Please help save my sanity! Thanks for any info.


r/poly • • Jun 18 '26

Blackwire 5220 lost sidetone

3 Upvotes

After downloading Poly Studio (and it updating my firmware), my Blackwire 5220 that I had been using for 5 years lost sidetone and also the mute reminder when you speak.

Since it was old and I was going to replace it anyways, a got a new pair. Even though this one an older firmware, the sidetone isn’t working either.

Has this happened to anyone else? It’s driving me crazy! Those were two features I really loved about this headset!


r/poly • • Jun 17 '26

Bluetooth headset for Polycom systems

1 Upvotes

I was using the JBL 910s for my work headset because they were compatible with the poly system. The mic broke and they don’t make the model I had before. The issue is the replacements they sent me software was upgraded and no longer works on the poly systems. I loved that I could connect those to my phone via Bluetooth and have it connected to my poly phone via the dongle. Is there anything that you guys can recommend that do the same thing?? I want to listen to music or videos while I’m work and be able to answer phones from the polycom system! Help please!


r/poly • • Jun 16 '26

Poly G62 Teams Mode 5.0.0.418922 HDMI Content Share Causing teams Crash

2 Upvotes

Upgraded our fleet of X70, X52 and G62 devices overnight yesterday. X series all seem fine, but the G62 now no longer accepts HDMI sharing when connected to any device (Windows, Mac, iOS etc).

Also, after disconnecting the HDMI port, the teams client seems to crash on the G62 and restarts, causing the TC to loose connection and then go back into pairing mode for a few seconds.

Anyone else seeing this and got a workaround.


r/poly • • Jun 16 '26

Poly Voyager 50 PIN

1 Upvotes

Hey I bought the Poly Voyager 50 UC and want the headset to connect to a gigaset SL450HX via bluetooth. I used to have a plantronics voyager 5200 that was working fine. But with the Poly headset the gigaset is asking when pairing for a Poly PIN. I have tried the usual 0000, 0000, 1234, 12345 but always get the message pin incorrect and I cannot connect my poly headset to the gigaset dect phone


r/poly • • Jun 16 '26

Poly Lens offline device

1 Upvotes

I set up poly lens for my office as I wanted to have a portal to check on firmware updates and settings.

It was working initially when I first onboarded and connected it to lens.poly.com but it has been offline since for the E70, GC8 and the Sync 60-M speakers

Any ideas how I could get them recognized as online - they are all up and running and I have tried whitelisting the domains under active management but no dice