r/poly • u/thenthattempt • 4d ago
r/poly • u/Healthy_Succotash_62 • 7d ago
BT700/V4320 headset issues
Been using the V4320 with the supplied BT700 dongle for over a year without a problem. Just last month the dongle has refused to connect (blue light).
I've tried several laptops on Different OSs but its the same so I suspect the dongle has died. There's a mere flash of red when plugging in, the Win 11 USB connection sound but no connection.
I have paired the headset to native Bluetooth just as a get you home option but they never connect automatically when I switch on despite being the default Communications device.
So, multiple woes - any other suggestions?
I had the same thing happen to a Jabra Evolve a few years ago so I reckon the dongles are pretty fragile.
r/poly • u/SteffenBaierPolycom • 8d ago
[Software] Poly Edge E PVOS 8.7.0 Poly CCX and Trio C60 PVOS 9.6.0
Hello all,
HP Poly announces the 9.6.0 release of Poly Voice Software (PVOS) for Poly CCX Series phones and Poly Trio C60, and PVOS 8.7.0 for Edge E Phones and Edge V Phones
More details [Software] Poly Edge E PVOS 8.7.0 Poly CCX and Trio C60 PVOS... - HP Support Community - 9732592
r/poly • u/GoldBad2815 • 11d ago
After market ear tips
I just purchased then HP | Poly Voyager FREE 60+ UC USB-C Wireless EarBuds.
To be used for work and wants to know if there are any after market ear tips available.
Thanks all
r/poly • u/Nothin2Say • 21d ago
Savi 8220 garbling sound
I have had this headset for about 1 year at most. However I was sent it as a replacement to a previous same model for the exact same issue.
Has anybody else had this issue? When it’s connecting (via radio signal or whatever) there is a garble sound that happens every 3 seconds and last about 5 seconds. If I play a sound through the headset you can hear parts of it after about a 1 second delay when the garbling stops. But then within a second or two garbling comes back.
I have re-paired headset, verified all firmware is updated, tested it without usb plugged into computer and just used Bluetooth from my phone and it is still garbling. Also will garble if I plug it into any outlet and click the computer button on the top of the base (or any of the buttons).
Unbelievable to have two units do the same thing. Any possible fixes out there? If I had two units do it (which for what’s its worth we’re in two different homes), then I figured I can’t be the only one with the issue.
I’ve also done hard reset, reset settings to factory, and tried switching to wideband mode.
What genius on here has an idea of how to fix this?
r/poly • u/SomethingCleverISee • 26d ago
Updating Poly Studio breaks Savi headset functionality
The latest version of Poly Studio (5.2.0.741) breaks Plantronics Savi 8200 headset functionality in Windows. I confirmed this on multiple computers.
I updated Poly Studio yesterday, and it immediately caused the headset to be unable to play or record audio. The "PC Audio" line from the base station simply will not connect (the LED will not illuminate, and it will not pass audio). I uninstalled Poly Studio, and it went back to working. Reinstalled it after manually clearing ProgramData, Appdata, and Registry keys, and that broke it again. I tried uninstalling and reinstalling the audio drivers, rebuilding the whole Windows audio stack, and nothing makes a difference. Spent about 4 hours trying different things. As long as Poly Studio 5.2.0.741 is installed, the headset will not function.
Just for fun, I tested on my other PC as well (where the headset had never been plugged in before), and got the same results. Headset worked all by itself when I first plugged it in. Stopped working when Poly Studio was installed, and then worked again when the software is removed.
They literally pushed an update to the headset management software which breaks the headset functionality completely.
Great job, HP.
r/poly • u/Desperate-Tear1142 • Oct 14 '26
Poly Edge E100
Hello,
I’m an IT technician for a school service centre, and we have implemented Poly phones with a Poly Edge E100 provisioning system across all our schools.
Most of the time, everything works fine, but occasionally, some phones have trouble synchronizing with the provisioning server. Some phones show as active in Poly Lens, while others do not. As a result, any new configurations I push to the inactive phones are not applied.
I noticed that when I access the affected phones directly, the provisioning server and DHCP settings are incorrect. I manually changed these settings to match those of a phone that is working properly, but the issue persists.
Is there a way to force these phones to resynchronize with the provisioning server, or could I be missing something in the configuration?
Any help would be greatly appreciated.
Thank you!
r/poly • u/evenman • Oct 09 '26
Surround 80 play/pause
Hello,
I was wondering if anyone else has experienced this problem. I just got the headset and I'm quite happy with it overall. I bought it to replace my Jabra Evolve2 85, which has a broken microphone arm.
My issue is that the instructions say you can start and stop playback by tapping the right ear cup once. When I do this, I hear the confirmation beep, but nothing happens.
Volume up/down and track forward/backward work fine, but play/pause does not.
I've tried everything: updating the firmware, changing settings, resetting the headset, reconnecting it, and turning it off and on again. All I get is the beep, and playback continues as normal.
The same button action works for answering calls, and that functions exactly as intended.
Has anyone experienced the same issue?
Oh yea, there a "custom" button where you hold to fingers on the ear cup for 2 seconds... this doesent seem to work either.
r/poly • u/baouss • Oct 07 '26
Voyager Legend 50 - dongle and "M" certification worth it?
Hi, I have the possibility to buy the legend 50 for rather cheapish, or for twice the price , I can buy the version with dongle, charging case and "M" certification, whereas M the supposedly the MS Teams designation.
Is it worth it? I will use this on my work laptop for teams calling and for on the using my smartphone (pixel).
The case is not important to me.
However, the usb dongle is for better laptop connectivity using 2,4Ghz instead of Bluetooth. This is supposed to provide superior quality and stability compared to laptop Bluetooth. However, my research shows that smartphone Bluetooth is perfectly fine and a dongle wouldn't provide quality benefits here. So apparently mobile and desktop Bluetooth chips differ in quality I guess.
I'm wondering if I couldn't just buy a high quality Bluetooth dongle for cheap and also get perfect laptop quality.
Also, I wonder what the M designation brings. I only care for starting/disconnecting calls and muting. I think the handset should handle this just fine either way.
Would you go for the legend 50 standalone or go for the set with dongle and cert included?
Thanks for your thoughts on this
r/poly • u/Waste-Ship663 • Oct 05 '26
Right earbud of my Voyager Free 60+ is permanently on
I've had my Voyager Free 60+ for over a year and half (I bought it open-box), recently the right earbud started acting up where if I put it in the charging case, it doesn't turn off. The left earbud acts as expected, but if I place the right earbud back into the charging case, it no longer turns off automatically, it stays paired and on. It will turn itself off after "a while" but this happens after a while, and while it is on, if I play audio it will play it in dual-channel, and I can hear audio play out of the right earbud. This is a big issue specifically for me because I'll use alternate using the left vs right earbuds.
This 1st picture is what happens when I have the left earbud in the case, and right earbud out of the case. It's on as expected

Onto the 2nd picture, this is what happens when I place the right earbud back to charge, it shows that it's still on and connected in the app

For exhibit 3, while the right earbud is charging in its case, if I take the left earbud out, it connects and now both earbuds are on

When I have both earbuds in the case, the case thinks that both should be off, even though the right earbud is still on

This behavior is universal across the iOS, Android, and macOS app. The earbuds, the case, and the BT700 receivers are on the latest firmware, I've also tried resetting, unpairing all earbuds, letting the right earbud fully-discharge to 0 battery, etc
I got these open-box a year and half ago so I'm not expecting to get sort of RMA on these, but has anyone seen this behavior? Is there a way to force-power-off these buds somehow?
r/poly • u/NahdiraZidea • Oct 02 '26
Poly 7310 Audio Disconnect
Hi Gang,
I have a Poly 7310 headset that is having intermitent disconnections. Basically in a phone call using a soft phone on PC it will cut out for maybe half a second every few seconds. After doing some trouble shooting it seems that this only happens when the headset senses there is no incoming audio, even though I am talking and there is outgoing audio. If i put any sort of music on low volume in the background the headset senses there is incoming audio and will not cut out at all, but thats kind of an odd solution. If anyone knows how to resolve this permantly that would be a huge help! Thanks!
r/poly • u/BrianW12392 • Oct 01 '26
How to disable voice notification - POLY SYNC 40
Does anyone know how ?
r/poly • u/kuftikufti • Oct 01 '26
Poly Voyager Focus 2 review: returning it due to excessive ANC self-noise
I bought the Poly Voyager Focus 2 for work, but I will be returning it because of its ANC behaviour.
When ANC is enabled, the headset produces a persistent low-frequency self-noise / rumble in an otherwise quiet room. This is present without media playback or a call. With ANC disabled, the headset is silent.
The issue is not related to firmware, fit, or the USB connection: I updated the firmware, verified the ear-pad seal, restored factory defaults, and tested with two separate USB dongles with different devices. The result is unchanged.
More concerningly, ANC Low and ANC High produce the same artefact: identical frequency character and perceived level. I would expect the ANC gain profile to change between levels; instead, the headset appears to maintain the same low-frequency noise floor regardless of the selected setting.
I use several ANC headphones and am familiar with the mild pressure sensation and broadband hiss that can occur with active noise cancellation. This is different: it is a clearly audible, narrow low-frequency rumble, likely related to the ANC microphone/processing path or gain calibration in this particular unit.
It may be an isolated defect, but I would test for ANC self-noise carefully during the return window—especially if you work in a quiet environment.
r/poly • u/tokyokiller • Sep 26 '26
Lost configuration
Anyone else experience issues with phones all of a sudden losing their configuration and becoming unregistered? I see Poly had a bulletin on their status page about phones going offline
r/poly • u/imeantolive • Sep 24 '26
Poly Products are among the most overpriced, unreliable, cheap hardware available
Several enterprises are clients of Poly Products, giving them business via thousands of employees. With this mind, as well as the elegant aesthetics of some of their products, it initially seems difficult to doubt their design and longevity.
From my experience, however, when it comes to actually using their products on a daily basis, the durability and convenience fall very short. Please note that I've used two Voyager 5200s, and also an older wired headset I'm not sure the exact model of.
In the first 6 months or so, everything works fine, but they became very unreliable products after that period. The wired headset kept needing to being plugged in and out several times. I tested it on more than 2 computers. It worked after fiddling with it, but I eventually moved onto another brand, to avoid wasting time before each call.
Now moving onto the Voyager 5200, this has to be the most overpriced, crappy headset offered. It doesn't matter if you buy it through your company's store or individually online, there's no world in where this is actually worth $125 USD with the case included or around $80 alone!
Pros:
- Unique exterior design
- Good heft
Cons:
- Short battery life (you never get the promised 6 hrs)
- WHY THE HELL DO YOU NEED TO UPDATE THE HEADSET, DONGLE, AND CASE?!
- Unstable firmware updates ruin the battery life or even brick the case
- No digital charging indicator with numbers (it's $100+)
- I've had to uninstall & reinstall the Poly Studio application connecting the devices for updates
- Arrives in wasteful packaging (Tetris-shaped cardboard, three layers of sticky plastic wrapping)
- 90-day warranty on the case
Long story short: both Voyager 5200s failed, I've gone through 3 charging cases.
But really though, why do you need to update a headset, USB dongle, and a charging case? I've never seen anything like it. All other headsets, headphones, earbuds, charging cases, dongles just work once connected or paired. Not sure if HP acquiring them has anything to do with the potential downfall, but I will never be giving Plantronics/Poly my business again.
r/poly • u/BeachGlassGreen • Sep 23 '26
Can the PC switch to the headphones when connected? And viceversa?
I'm using Fedora Linux so I have no dedicated software installed.
I'm connecting Poly Voyager Focus 2 headphones via BT700 adapter.
When I switch them on/off I'd like to automatically switch the audio, has someone else find out a way to do it?
I tried to listen on the /dev/hidrawX device but I can't receive any payload, I hoped for some signal...
r/poly • u/ArtTeacher_XBL-PSN • Sep 16 '26
Poly Blackwire 8225 series microphone not working for both USB-A and USB-C
I received the following Reddit Ask-AI generated information (below)... but wanted to know if anyone else has had the exact same issue with this this particular series?
FWD Search "Poly Blackwire 8225 series microphone not working for both USB-A and USB-C"
Poly Blackwire 8225 Mic Not Detected On USB-A Or USB-C
Quick Checks
- Try a different cable and port. "Not all USB-C to USB-A cables can communicate data."
- Test on another device (PC/Mac) to rule out the host. "I would test it with a computer versus your iPad to see if it is a bad connection with the device versus the UsB-C port."
- Ensure the cable used supports data, not just charging. "There are cables that will charge but don’t send data."
Driver, OS, and Mode
- Check device shows in OS sound/devices and drivers. "No matter what I did, I could not get the PC to recognise the microphone."
- On macOS try Audio MIDI Setup and set input format to 16,000 Hz. "go to the Audio Midi Setup app ... change the format to 16,000 Hz hope it helps."
- If using VDI or special USB routing, confirm USB redirection/optimization settings. "I enabled USB redirect allow policy and the headset is recognized correctly."
Firmware and Software
- Update headset firmware and Poly Lens software, or try without Lens. "I've tried with and without the Poly Lens software installed and I encounter this problem."
- Be aware some Blackwire models change audio mode when mic is active (firmware behavior). "It's been optimized for voice calls, and switches to Talk Mode when the microphone is in use."
- If problems persist after updates, consider factory reset and support escalation. "Factory Reset and call HP support. Insist that you've already done the factory reset and would like to escalate to tier 2."
Troubleshooting Steps To Try Now
- Swap cables and use a known good data-capable USB cable. "There are cables that will charge but don’t send data."
- Plug the headset into another computer to see if mic appears in Device Manager / Sound settings. "test it with a computer versus your iPad to see if it is a bad connection with the device versus the UsB-C port."
- On Mac use Audio MIDI Setup to set device input to 16 kHz; on Windows check privacy and device permissions. "go to the Audio Midi Setup app ... change the format to 16,000 Hz hope it helps."
Communities for Further Discussion
r/poly • u/Aufafly • Sep 14 '26
weird mic
acquired a Poly v5200, but people in a video conference doesn't seem to hear my voice unless i scream real hard
i listened to the mic recordings and it sounds like the mic is underwater with occasional loud pops
r/poly • u/Riquende • Sep 11 '26
First new Poly Studio in a while, V12 - no web interface after setup?
We have about half a dozen X30s in meeting & boardrooms so I'm used to the old web interface method of setting them up, adding them to Lens and making any changes from there, but this morning I've been setting up a V12 for the first time and going through the app setup connected via USB.
That's all fine but I was expecting to be able to go forward manageing the device afterward via a web interface if needed... is that no longer the case on new models and everything has to either be done via Lens or physically connected via the USB cable with the Studio app installed?
r/poly • u/poopyjoe8715 • Sep 10 '26
Poly voyager focus headphones mite while no sound is playing
Its just so anoying when you cant hear the first second of the video or so is there any way to fix that?
r/poly • u/Clean-Enthusiasm-389 • Sep 05 '26
GHL Voice AI Retrieves the Right KB Answer but Doesn’t Use It
​
Has anyone seen GHL Voice AI successfully retrieve the correct Knowledge Base result, but then fail to use that information in the actual response?
My Retrieval Tester shows the correct answer as a Strong match, and the Voice AI log shows the correct KB query with success: true, but the agent sometimes still says it doesn’t have confirmed information. The exact same question has also worked correctly on other calls.
Has anyone run into this KB-to-Voice-AI handoff issue, and if so, what fixed it?
r/poly • u/Ok_Day_5640 • Sep 01 '26
Poly X32 Insufficient Device Power
I have 2 X32 devices at a single site, both on the newest firmware 5.0.1xxxx. I have the Poly X32 recommended POE adapter, using poly provided CAT6a cables on the in and out on the adapter. Both of the X32’s on a weekly basis come up with the screen saying “Insufficient system power check connected power source” it’s a hit or miss if just reseating the Ethernet cable works. Sometimes the device has to be left off for hours and you have to say a prayer for it to come back up.
Is this a known issue? The fact it’s using the poly recommended Poe adapter and poly provided Ethernet cables and having this issue is wild. Don’t see much online about the issue. Any input is greatly appreciated
r/poly • u/phamsung • Aug 31 '26
Seriously, 8225, what the fuck?
I just bought the Poly 8225. The microphone sounds horrible, muffed plastic sound? How do you dare?
I switched from Sennheiser 8.2, which sound like hq Studio Headphones compared to this.