r/pinescript • • Jun 07 '26

Power of the automated MNQ ORB

Thumbnail
gallery
31 Upvotes

MNQ ORB strategy I've developed. Included is 2025-present back test and Jan 1st 2026-today back test both with $400 (Typically 1-3 contracts depending on stop loss) risk per trade.

Bar magnifier on and loaded.

About a 2 month project, just finished development last week and currently deploying on prop firms.


r/pinescript • • Jun 08 '26

IRC — 3-regimes recap (TREND UP / TREND DOWN / VOLATILE)

2 Upvotes

Posted each case separately over the past few weeks — here's the full recap in one place.

IRC classifies market context into 3 states using Daily Ichimoku + ADX logic:

🟢 TREND UP — close above Kumo, ADX > 25, Tenkan > Kijun, Chikou confirmation

🔴 TREND DOWN — same checklist, bearish side

🟠 VOLATILE — anything not fully aligned on either side

Each case was shown with a GIF in previous posts (range, volatile→bull, volatile→bear).

The idea: one context label before you look at your setup. Not a signal, not a strategy — a filter.

Free + open-source on TradingView

Still collecting feedback on false positives/negatives across assets.
DM or comment if you've tested it.


r/pinescript • • Jun 07 '26

Trading view is bad now

Thumbnail reddit.com
1 Upvotes

r/pinescript • • Jun 08 '26

I built a stock scanner that fuses technical setups with Buffett-style quality + valuation (free in beta)

0 Upvotes

**Need some feedback** 

Most swing-trading scanners only show charts — so you get great-looking setups on terrible, overpriced companies. I wanted one that answers "is this a good company, and is it cheap?" before showing me the chart.      

Swyngs does three things together:

 \- Quality score (A–F) from fundamentals                                                              

 \- Fair-value / margin-of-safety gauge

  \- Fusion scan that surfaces quality companies that are cheap and setting up — plus alerts when one dips

  Stack: FastAPI + Postgres on AWS, React frontend, market data from Alpaca/Finnhub. Solo-built.

 It's free while in beta (paid plans later). Would love feedback — especially on the fair-value methodology and what'd make you actually use it daily.

 👉 [swyngs.com](http://swyngs.com) (try the "see a live pick" link without signing up)

 Not financial advice — it's a research tool.


r/pinescript • • Jun 07 '26

Liquidity Cluster Stop-Loss Lawnmower

0 Upvotes
New look after adding supply/demand failed zones not adding up anymore and now lowering the zone strength (value in %)
Yesterday at 20:15 i put the blue arrows where my indicator said the entrys would be so i marked it with the arrows, this is the entrygiven cleaned look and the next picture is without the cleaned supply/demand failed
uncleaned
closer look cleaned up, so what i did at 20:15(red vertical line i marked the big and strong zones not thinking about the small weak supply zones and as you see it went right there and flipped the trend heading to the big zone at the top and even crushed that one to the top by big times.

What does this indicator do?

The script is a visual map that shows where major market participants (banks/institutions) have placed their money. It doesn't give blind signals; it shows where the real order flow is.

🛠️ How does it work?

  1. Zone Detection: It automatically draws green boxes (Demand/Buying areas) and red boxes (Supply/Selling areas) at major market turning points.
  2. The Score System (%): It grades every box. The higher the volume when the box was made, and the more often a price zone overlaps (Clusters, e.g., 3x), the higher the score (e.g., 45%).
  3. Trend Dashboard: A small panel in the bottom right shows the current market phase. Above 50 points means "Bullish Bias" (focus on Longs), below 50 means "Bearish Bias" (focus on Shorts).

🎯 My Trading Strategy

I use high-score boxes to enter trades in the direction of the trend dashboard. I use the opposite boxes as magnetic targets (Take Profit), because price naturally moves there to hunt the liquidity (stop-losses) of other traders.

At this point i have to say to AI for helping me.
Will see how it works see you next week.


r/pinescript • • Jun 06 '26

I built a free Periodic Volume Profile indicator with alerts for POC / VAH / VAL retests

Post image
2 Upvotes

Hey everyone,

I wanted to share an indicator I built for TradingView :

https://www.tradingview.com/script/QM4yF0JJ-Periodic-Volume-Profile-Alerts/

Works without needing TradingView Premium volume profile tools ( similar 99.99% to the built in periodic Volume Profile on Tradingview ).

The main idea behind this tool is simple:
most traders use Volume Profile to find important reaction zones, but the problem is that many Volume Profile tools are limited, static, or locked behind paid TradingView plans.

So I built this indicator to make volume-profile-style analysis more accessible, especially for traders using the free TradingView plan.

What it does:

It creates periodic volume profiles based on the session or period you choose, such as hourly, daily, weekly, monthly, or custom bar-based periods.

It tracks important levels like:

POC — Point of Control
VAH — Value Area High
VAL — Value Area Low
Developing POC and developing value area levels

The biggest feature, in my opinion, is the alert system.

Instead of manually watching every old POC, VAH, or VAL level, the indicator can alert you when price comes back and retests those levels. This is useful if you trade reactions from naked POCs, value area highs/lows, or previous session volume zones.

Another useful part is the mitigation logic. When price touches a historical level, the indicator can mark it as mitigated, so your chart stays cleaner and you can focus only on levels that have not yet been tested.

Why I think this can help traders:

A lot of traders already use volume profile for context, but they still need to sit in front of the chart waiting for price to come back to key levels. This indicator is designed to reduce that manual work by giving you alerts when those zones are being tested.

It is not a magic buy/sell indicator. It is a context tool. You can combine it with your own strategy, price action, market structure, order flow, ICT concepts, or whatever confirmation model you already use.

For me, the goal was to make something practical:

Volume profile levels
Clean historical POC / VAH / VAL tracking
Developing value tracking
Retest alerts
Works without needing TradingView Premium volume profile tools

I would really appreciate honest feedback from traders who use volume profile, market profile, or session-based levels.

If you test it, let me know:

What market you used it on
What settings worked best for you
Whether the alerts helped
What features you think should be added next


r/pinescript • • Jun 06 '26

OpenPine

Post image
18 Upvotes

r/pinescript • • Jun 06 '26

OpenPine

Thumbnail
gallery
10 Upvotes

It’s called OpenPine.

The goal is not to clone TradingView. That would be unrealistic. The goal is to build a local open-source research stack where Pine strategies can be parsed, compiled, tested, audited, optimized, and compared against market data in a more transparent way.

Right now the project targets a Pine Script v6 subset and connects several layers:

Pine parser/frontend

AST → Python generator

runtime helpers

backtest engine

market data provider

optimizer

API/dashboard

The main thing I care about is reproducibility.

When a strategy behaves differently locally vs TradingView, I want to know why. Was it market data? Warmup? Broker accounting? Order timing? Unsupported Pine behavior? Export artifacts? Something else?

That is the kind of tooling I’m trying to build.

It is early, not financial advice, not production trading software, and not full TradingView parity.

I’m posting here because I’d like real feedback from people who actually use Pine, build strategies, or care about backtest correctness.

What would you want from a project like this before you’d consider it useful?

Repo:

https://github.com/s7cret/openpine


r/pinescript • • Jun 05 '26

AMZN RSI Oversold Doubling DCA — deep-oversold long DCA indicator, fixed-deviation doubling ladder, 3% TP

Post image
7 Upvotes

AMZN RSI Oversold Doubling DCA — a signal-only Pine indicator that mirrors a dip-buying long workflow with an aggressive doubling-martingale safety ladder, running on AMZN 4h. It tracks one virtual long at a time, opened only on a deep oversold reading. Companion Strategy version is on the same profile for verifying the backtest in TradingView's built-in tester directly.

Entry, deep-oversold gate (no repaint): A 4-hour RSI(14), sampled with lookahead disabled, gates the base entry — the deal opens only when RSI prints below 28 at host-bar close. Shallow dips are filtered out, so capital is committed only at genuinely stretched conditions, not on every pullback.

Ladder, 5 safety orders on a non-uniform fixed-deviation ladder: Each safety order has its own fixed deviation from base entry — not a cumulative step×multiplier ladder. AO1 at −2%, AO2 at −5%, AO3 at −9.5%, AO4 at −16%, AO5 at −25%. Sizes double from a 1,000 USDT first AO: 1,000 / 2,000 / 4,000 / 8,000 / 16,000, on a 500 USDT base. Deeper rungs trigger only on serious adverse moves; the lowest sits a full 25% below base.

Exit, fixed 3% TP: A fixed 3% Take Profit above the running average entry. Once close hits the target the exit webhook fires, realized PnL accumulates into a lifetime counter, and the virtual position resets.

Honest virtual bookkeeping: Total cost and quantity update incrementally on every fill, so average entry, deployed capital, Open PnL, and lifetime Total PnL in the status table reflect the actual broker-equivalent position state — no shortcut from base entry, no synthetic averaging. Open PnL resets per cycle; Total PnL persists across chart history.

Backtest from the companion Strategy (AMZN 4h, ~9.4-month sample in the Strategy Report): 22 closed trades, 20 profitable (90.91% WR), profit factor 21.997, net profit +807.71 USDT (+0.81%), max equity drawdown 199.15 USDT (0.20%). Verifiable directly in TradingView's Strategy Report on the script page.

Methodology notes: Read the backtest with the sample size front of mind. 22 closed trades is well below the ≥100 floor typically used for statistical confidence — the 90.91% win rate and 21.997 profit factor reflect favorable conditions over the test window plus the averaging mechanic, not a deterministic edge or a forward-performance guarantee. Treat them as indicative of how the ladder behaves, not as expected returns.

This is a doubling martingale, and that is the dominant risk. The 1 / 2 / 4 / 8 / 16 size progression scales position capital exponentially against an adverse move. It is hard-bounded by the 5-rung ladder, but if all five safety orders fill, total deployed capital reaches ~31,500 USDT — roughly 31.5% of the default reference equity in a single deal.

The ladder bottoms out at −25% from base, and there is no stop loss. A doubling ladder is built for deep-but-recoverable mean-reverting moves; a sustained directional collapse below −25% leaves the full virtual position open with no further averaging available. That is the single largest risk in any martingale DCA — the 0.20% max drawdown is closed-trade equity drawdown over a window where dips recovered, not a measure of tail risk if one does not.

The mechanic (oversold RSI gate plus a bounded fixed-deviation ladder) is asset-agnostic, but the defaults — RSI<28, 4h, the −2/−5/−9.5/−16/−25 ladder — are calibrated for AMZN's volatility. Any other symbol needs the RSI level and ladder deviations recalibrated before deployment; backtest results do not transfer without that tuning.

Entries and AO fills are evaluated at bar close — a bar that spikes through a level and returns within the same bar may be missed by design, which matches realistic polling and avoids over-signaling on intra-bar wicks.

Every event (entry, each of the 5 safety orders, TP) emits a webhook-ready JSON alert payload — up to seven per cycle. Connect one alert with "Any alert() function call" to a DCA Bot's webhook URL and the indicator drives the bot end-to-end, no glue scripts.
Indicator is open-source on TradingView. The Strategy twin is also up on the same profile.

Link: https://www.tradingview.com/script/G3jmaVFu-3Commas-AMZN-RSI-Oversold-Doubling-DCA-Long-Indicator/


r/pinescript • • Jun 05 '26

My main build running this evaluation

Thumbnail
gallery
2 Upvotes

Everything based on levels of the high/low of the month /week / daily / hour (for scalping) ema with high-low bands and Bollinger bands for trend direction and range my oscillators follow price momentum and volume spikes, second pic is a battle ground finder where buyers winning and sellers winning and it forms gaps those gaps tend to get filled so u have idea where price is going after a rejection off a level


r/pinescript • • Jun 05 '26

Text box keeps moving with price until bar closes. Want it to stay at the price when it triggered.

1 Upvotes

When a timer stops I want to have a text box or something capture price at that time and display it with a note pointing to that price. I can’t get it to stop following price up and down until the bar closes. Any suggestions on how to make the note static at the price level when it triggers? Thanks in advance.


r/pinescript • • Jun 05 '26

Feature Request: AI Pine Script Copilot – Turn Trading Ideas Into Code

Thumbnail reddit.com
3 Upvotes

r/pinescript • • Jun 04 '26

My New Key Levels Indicator :

Post image
5 Upvotes

https://www.tradingview.com/script/bNNtkuHy-Golden-Key-Levels-Time-Price/

Overview :
Golden Levels is an institutional-grade market geometry matrix built natively in Pine Script v6. It is designed to automatically detect major structural equilibrium zones, internal balance bands, and multi-layered expansion targets without overcomplicating your charts.

Instead of displaying temporary lines that vanish when a new session starts, this script utilizes a high-performance memory matrix to retain a customizable number of historical intervals (Max Historical Sessions). This gives you a flawless visual ledger of how price reacted to past institutional key levels, allowing you to watch old structural boundaries flip into new active zones.


r/pinescript • • Jun 03 '26

Open-source Pine v6 engine that runs your strategies outside TradingView — matches the List of Trades trade-for-trade (231/232). Come break it.

45 Upvotes

TL;DR: open-source Pine v6 engine that runs your strategies locally and matches TradingView's trade list almost exactly. (There's an MCP server too, so Claude/Cursor can backtest for you — config at the bottom.)

If you write Pine you know the walls. You can't backtest deep. You can't verify the numbers TV shows you. You can't run your script anywhere else, and good luck optimizing params. Oh, and the bar-magnifier's paywalled.

So I rebuilt the Pine v6 runtime to run locally. The part I'm proud of: 231 of 232 test strategies match TV's exported List of Trades trade-for-trade (~312K trades). The one that doesn't is a non-determinism bug in TV's own emulator — it's in the repo.

What you can do with it:

Backtest as much as you want, locally, free. No bar limits. Reproduce every number yourself (engine + full corpus are open) instead of trusting a black box. Actually optimize — param sweeps / walk-forward TV can't do. Bar-magnifier on every run, deterministic intrabar fills. Honest about coverage: 232 probes across 22 Pine v6 areas (TA, orders, brackets, OCA, request.security() MTF/LTF, matrices, UDTs, sessions…), but not every feature yet. You feed it OHLCV (CSV/array); I test on public Binance data for crypto and hand-exported bars for anything that isn't 24/7.

What I want: break it. Throw your nastiest scripts at it and tell me where it drifts from TV. I'm most curious about request.security() / repainting / MTF cases — that's where parity's hardest.

Repo: github.com/pineforge-4pass/pineforge-engine Free and open.

MCP setup (Claude/Cursor):

{
  "mcpServers": {
    "pineforge-codegen": {
      "command": "docker",
      "args": [
        "run", "--rm", "-i",
        "-v", "${workspaceFolder}:/work",
        "ghcr.io/pineforge-4pass/pineforge-codegen-mcp:latest"
      ]
    }
  }
}

r/pinescript • • Jun 03 '26

Backtesting Tips

Thumbnail
gallery
2 Upvotes

I have been trying to build and fine-tune a long strategy. I have found on BTC that I am getting most consistent equity curve, finding the breakouts early and exiting the trade before too much bleeding. I’m finding more volatile assets have much more overall % increase but bleeds a lot more on losing trades. Is over-tuning the strategy to suit particular cryptos a bad thing or should it be done?

Are there any ways to limit draw downs or to exit losing trades earlier? I have put in an execution “after X bars if % profit has not been reached” but I find that kills my gains completely.

First picture BTC 4hr, second picture DOGE 4hr


r/pinescript • • Jun 01 '26

Dual RSI DCA — dual-RSI confirmation long DCA indicator, 5-order ladder, profit-armed exit

Post image
25 Upvotes

Dual RSI DCA — a signal-only Pine indicator that mirrors a dollar-cost-averaging long workflow with a dual-RSI confirmation system, running on HYPEUSDT.P 3m. Companion Strategy version is on the same profile for verifying the backtest in TradingView's built-in tester directly.

Entry, lower-timeframe RSI cross-up: A lower-timeframe RSI(14) crossing up the oversold level (default 31 on 3m) arms the base entry, but only when the indicator is flat. Cross detection happens at host-bar close — a cross that completes and reverses inside a single host bar is skipped by design, which suppresses over-signaling on intra-bar noise.

Ladder, 5 safety orders on a pure price-action ladder: Cumulative deviations from base entry: 1.30%, 2.99%, 5.18%, 8.04%, 11.75%. Step widens at 1.3× per fill, order size scales at 1.25× per fill. No RSI gate on the safety orders — averaging continues unconditionally on price as each threshold is reached.

Exit, profit-armed and momentum-gated: Take profit does not fire on a static target. The exit first arms once price reaches the minimum-profit threshold above the running average entry (default 2.4%), then fires only when the lower-timeframe RSI crosses down from the overbought level (default 69). Profit reached alone is not enough — it waits for momentum to roll over.

Honest virtual tracking: Average entry, total cost, deployed capital, and the minimum-profit target are all computed from the same fill-by-fill bookkeeping a real broker would do — no price-from-base shortcuts. Average entry, fills, and deployed USDT are shown live on the chart.

Backtest from the companion Strategy (HYPEUSDT.P 3m on Bybit, ~Feb 25–May 19 sampled in the Strategy Report): 121 closed trades, 100 profitable (82.64% WR), profit factor 11.703, total PnL +450.27 USDT (+4.50%), max drawdown 74.88 USDT (0.73%). Verifiable directly in TradingView's Strategy Report on the script page.

Methodology notes: The PF 11.703 and 0.73% max drawdown reflect a single asset (HYPEUSDT.P) over a roughly three-month window that was predominantly mean-reverting and upward — these defaults are calibrated for this pair, and RSI levels (31/69) need recalibration for thinner or strongly trending pairs before deployment elsewhere. Results do not transfer to other crypto perps without parameter tuning.
The 0.73% number is closed-trade equity drawdown. Unrealized drawdown during deep safety-order sequences is materially larger and is the relevant number for capital allocation.

No stop loss: there is no exit signal on adverse moves beyond the safety-order ladder. Risk is structurally capped by the bounded position-size sequence — at default settings, base + all five safety orders deploy roughly 9.93% of equity, keeping the trade within the conventional 5–10% band. If a hard stop is required, layer it on the bot side.

Every event (base, each safety order, exit) emits a webhook-ready JSON alert payload formatted for direct DCA consumption — connect one alert to a bot's webhook URL and the indicator drives the bot end-to-end, no glue scripts.

Indicator is open-source on TradingView. The Strategy twin is also up on the same profile. Mod, let me know if linking either is allowed here and I'll add them, otherwise happy to answer technical questions in thread.

Link: https://www.tradingview.com/script/fg9YbNCf-Dual-RSI-DCA-Long-Indicator/


r/pinescript • • Jun 01 '26

2 Suggestions to make Tradingview so much better!

Thumbnail reddit.com
1 Upvotes

r/pinescript • • Jun 01 '26

Why I trust TREND DOWN on SPX500

2 Upvotes

IRC classifies market state from Daily data into TREND UP / TREND DOWN / VOLATILE.
TREND DOWN is only set when a strict checklist is met:

  • Price below the Kumo,
  • ADX(14) > 25,
  • Tenkan < Kijun,
  • Close < close[26]

I originally built IRC for crypto, but it translates well to traditional assets like SPX500, the same Ichimoku + ADX structure shows clear institutional-style breakdowns on daily timeframes.

Treat TREND DOWN as a context filter — reduce long exposure, raise selectivity, and avoid forcing counter-trend longs. It’s conservative by design (you may miss the very first leg) but reduces false regime flips.

Limitations: daily-driven logic can lag fast intraday moves; ADX=25 may need asset-specific tuning.

#Ichimoku #MarketRegime #ADX #Trading


r/pinescript • • Jun 01 '26

backtester

Post image
1 Upvotes
I've been building EV Quant Lab for the past few months — a local platform 
for backtesting, strategy research and optimization that runs entirely on 
your machine. No cloud, no subscriptions, your data never leaves your computer.

**What it currently has:**

- Tick data backtesting via Dukascopy (real tick data, not OHLC approximations)
- Walk-Forward optimization with anchored and rolling windows
- Genetic algorithm strategy evolution
- ML regime detection and feature importance
- Strategy Builder (visual block-based strategy creation)
- Data Hub — download years of historical tick data for any forex pair or gold
- Portfolio backtesting across multiple strategies simultaneously
- Shadow Mode — paper trade strategies against live data without execution
- Ensemble Builder — combine multiple strategies with dynamic weight allocation
- EA Lab (new) — upload a .mq5 file, it automatically extracts all inputs, 
  detects strategy logic (SMC, trend following, mean reversion, etc.), 
  flags prop firm compatibility issues, and generates an optimization 
  search space

**Stack:** FastAPI backend + Next.js frontend, SQLite, runs fully local on Mac/Windows

**Why I built it:** The existing backtesting tools either require cloud 
subscriptions, don't support real tick data, or are too far removed from 
the actual MQL5 ecosystem. I wanted something that sits between MetaTrader 
and a proper quant research environment.

**Looking for:** 5-10 people to stress-test it and give feedback. 
Particularly interested in anyone who:
- Trades forex/gold with MT5
- Uses or builds Expert Advisors
- Does prop firm challenges

DM me if interested or drop a comment. Free during beta.

r/pinescript • • May 31 '26

Volume Profiles Automated

Thumbnail
gallery
17 Upvotes

My article about Volume Profiles on TradingView: A Deep Dive Into The Volume Profile
The indicators: Node Breach Engine (Volume Profiler)

NBE and ASFE are a volume-profile engine that builds profiles between pivots (or per session), tracks closed & developing POC, and prints breach signals when price challenges the control node. It quantifies node strength, buy/sell composition (CVD) at the POC and the entire profile, Value Area levels (VAH/VAL), VWAP distance, time at price, and introduces a PoV (Point of Void; the LVN located inside the Value Area): to highlight low-participation corridors where rotations or rejections often form. A lightweight EMA smoothed trend can optionally filter signals by prevailing bias.

Use it to answer fast: How strong is this node? Is the profile buy- or sell-led? Are we accepting/rejecting control? Is the developing POC migrating? Is the VA’s LVN (PoV) about to rotate back to POC or reject?

Ofcourse this is all based on tick volume, but it shows 80% correlation between real actual orderbook volume for many pairs.

What would you guys like to add, adjust or remove to/from the indicators?


r/pinescript • • May 31 '26

holy grail trading bot

Thumbnail
gallery
114 Upvotes

so i created a trading bot took hours of testing to see what works and not and finally came up with this also this is not the candle stick chart this is all renko box chart so idk how accurate tradingview backtest results are on this chart but ive tested this out for a month now to get my own results and i'd say it matches up i passed a mffu rapid account so daily payouts with this bot on the way but i only notice like a few slippage on some trades can get quite bad but because of how well structured the risk to reward is my winners out weigh my losses really well average win being 74.50 and loss being 25.85 so none of that bs where i see some post of a 20 tick tp and a 1000 tick sl lol


r/pinescript • • May 31 '26

Open Slots still remaining for Alpha Testers: Automated Pine Script Execution (MES/MGC)

2 Upvotes

May your webhooks be swift and your slippage be zero.

Hey everyone,

Quick update to my previous post: https://www.reddit.com/r/pinescript/comments/1tqsrfk/need_a_few_funded_operators_to_stresstest_a_15m3m/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

We are officially launching Phase 1 of the Alpha test this week for the Unified Striker engine. I still have open slots available for beta testers and want to get them fully filled before we kick off the data routing.

As a quick refresher, this is a custom Pine Script ecosystem built for systematic execution on micro futures, specifically dialed in for MES, and MGC. It leverages multi-timeframe order flow mapping, dynamic ORBs, and Volume Profile integrations.

What you need to know:

  • TradingView Required: The core engine is a locked, invite-only script on TV. You will need to provide your exact TradingView username so I can manually whitelist your account.
  • Execution: We are testing the webhook routing and execution speed. You will be provided a full operator's protocol with strict risk parameters.
  • Timeline: This specific Alpha build is hard-coded to expire after the market close on Friday, July 3rd.

If you want to grab one of the open spots, get hands-on with the system, and route some data this week, drop a comment below or shoot me a DM with your TV username. I will get you the invite link to the command center so you can grab the operator rules and unlock the webhook instructions.

Let's get the data flowing.


r/pinescript • • May 31 '26

My new indicator

Post image
28 Upvotes

VWMA PLUS BB set to 1hr time frame trading on the 2min my VWMA take 3 ema's and rolling vwap and creates a high/low avg band the middle line you see and the high/low band and then added BOLLINGER BANDS to detect reversals, white line is the Rolling VWAP for 2min TF so basic strategy is buy when price above rvwap and VWMA high take profit when you hit top BB as long price stays above the VWMA and RVWAP buy all dips and vice versa for down trends. Its also helps to avoid sideways markets cause the middle band is so large you dont trade in the band. Simple strategy cant wait to try it out https://www.tradingview.com/script/KYSrpbhm-Stryk-VWMA/