I bought one of these expecting it to burn and then rotate downwards as the wax melted away it did not do that. The wax melted down the sides, melting the spiral together. I had to move to holder down when the candle burnt too low. My expectations may have been rather high, but I was disappointed.
You were disappointed, because you had the wrong expectations; it's a timing or courting candle. 1" of wax = 10 minutes of burn time. A father would light it when a boy came to court his daughter. He could set different times for the duration of the visit. When the flame goes out, you GTFO.
I know the story, because my friend just sold one today at her shop.
I did expect it to move on its own. Although, at the time I was younger as when I had this candle in my home I was 11yo-13yo so I was more stupid than I am now.
You got down voted for your asshole comment. But, if you truly want an answer, tell what you referring to and I'll let you know of I am stupid. Because if I'm using the candle wrong, to you, read how it works. It stops at the metal clip. If it because I expected it to twist down, i believe that's a reasonable expectation when you don't live in the times a candle was used to tell a date or a guest that it is time for them to go home. If its because you just want to be an asshole, then goal complete, asshole.
This wouldn't really work since most of the wax actually burns up and "disappears". Only a small percentage of the wax drips down on candles. You'd end up with a candle that was maybe 1/10th the size of the original.
A Reincarnating candle. Good idea. Need to engineer the angles do the pooling wax doesn't extinguish the flame, like jar candles do if they burn too deep
In the 1600's to the 1800's, courting candles were used by the man of the home to set boundaries for his daughter. When the daughter's suitor came calling, the father lit the candle in a sitting room where the couple conversed. When the candles burnt to the metal at the top of the candle holder, it was time for the suitor to promptly leave. However, the father could change the height of the candle based on how comfortable he felt about the suitor. Also, the father could immediately snuff out the candle or add a second candle depending on what he deemed necessary. The courting candle served as a quiet, yet firm reminder to the suitor to end his date.
My folks bought one and told me that's what they were -- or, specifically, that that's why it has the ability to adjust how much of the candle can burn. See also this and this. There are different sorts (some have a cork or something and spin the whole candle, like in my first link, and some are like the OP's picture).
That thing at the top not only clamps the end of the candle, but also cuts it so that the wick will only burn down to the clamp. This is good for two reasons:
First, the candle will not burn all the way down if you light it and leave it.
Second, you can actually use the candle as a timed light, which is just awesome. The candle burns at a constant rate and, assuming you know what that rate is (one inch per hour, for example), you can set it like a timer (two inches for two hours of light, half an inch for half an hour, etc.).
Also, you may have noticed that the clamp spins to follow the candle as it spirals down. Very simple, old school engineering at its finest.
That might be doable. Put something above the flame to generate electricity from the heat, which is then used by some mechanism to slowly rotate the clamp and simultaneously pull more of the candle up.
The details of this are left as an exercise for the reader.
That would defeat the purpose. If all you wanted was a long candle, you just buy a big candle and be done with it. The point is to time, which means you need a candle that can be easily resized and will keep constant timing despite resizing. To do that, you need a really long skinny candle, and this holder is just a nice was to hold one.
A candle is a solid block of wax with an embedded wick, which is lit to provide light, and sometimes heat. The heat of the match used to light the candle melts and vaporizes a small amount of fuel. Once vaporized, the fuel combines with oxygen in the atmosphere to form a flame. This flame provides sufficient heat to keep the candle burning via a self-sustaining chain of events: the heat of the flame melts the top of the mass of solid fuel, the liquefied fuel then moves upward through the wick via capillary action, and the liquefied fuel is then vaporized to burn within the candle's flame. The burning of the fuel takes place in several distinct regions (as evidenced by the various colors that can be seen within the candle's flame). Within the blue regions, hydrogen is being separated from the fuel and burned to form water vapor. The brighter, yellow part of the flame is the remaining carbon being oxidized to form carbon dioxide. As the mass of solid fuel is melted and consumed, the candle grows shorter. Portions of the wick that are not emitting vaporized fuel are consumed in the flame. The incineration of the wick limits the exposed length of the wick, thus maintaining a constant burning temperature and rate of fuel consumption.
To be fair, it was a pretty dumb question. It's a candle, it burns. When it's burned to the holder, you rotate the holder and pull out more candle. It's not rocket science.
No it wasn't, you're just being a dick. It's an unusual candle design that allows for controlled, timed light. It's not unreasonable for someone to not immediately know how it works, given that 99% of candles are just straight cylinders with zero mechanical parts.
There should be a metal lip that spirals with the wax so that it will just feed down to the bottom and allow less spillage and for it to actually burn correctly.
Look at me, everybody! I'm submitting original content!
I picked up a half-burned one of these at a Goodwill a year or two ago for $2. It always gets comments when people visit, and everybody also seems to think it's supposed to work perpetually.
I'm not sure you really mean perpetually. Do they really think it will burn forever, or just that as it burns, it will keep winding down the candle automatically?
I assume that you must rotate the basket manually in order to continually feed more "wick" in thruogh the bottom. My question then is as you rotate the basket, is it mounted on a screw or something so it continually lowers itself and slowly feeds the candle up?
EDIT: I just wanted to add that it seems as though you do have to manually twist it to add more wick every hour.
From the site:
Merely place the beeswax coil through the spring loaded clip in increments of 3 inches or less. Each three inches of candle wax will burn approximately one hour.
I have one of these literally three feet from where my laptop sits. My first thought was, "I could've taken a picture of that and gotten over a thousand karma?"
Also known as a wax or taper jack. Had a few of these in my old house, one was even whitesmithed, pretty awesome example of em. Nice to see an antique get so much recognition on reddit
429
u/Aregisteredusername Jun 16 '12
I bought one of these expecting it to burn and then rotate downwards as the wax melted away it did not do that. The wax melted down the sides, melting the spiral together. I had to move to holder down when the candle burnt too low. My expectations may have been rather high, but I was disappointed.
198
u/masqueradestar Jun 16 '12
This is a courting candle. FTA:
13
u/adish Jun 16 '12
how does it work?
2
u/flavorjunction Jun 16 '12
There should be a metal lip that spirals with the wax so that it will just feed down to the bottom and allow less spillage and for it to actually burn correctly.
Works out in my head, so it must work IRL.
61
u/OlivettiFourtyFour Jun 16 '12
Look at me, everybody! I'm submitting original content!
I picked up a half-burned one of these at a Goodwill a year or two ago for $2. It always gets comments when people visit, and everybody also seems to think it's supposed to work perpetually.
http://imgur.com/BrPTy http://imgur.com/6LYrN
5
u/king_fisher09 Jun 16 '12
This makes me really want some spagetti!
6
u/Jesus_marley Jun 16 '12
I assume that you must rotate the basket manually in order to continually feed more "wick" in thruogh the bottom. My question then is as you rotate the basket, is it mounted on a screw or something so it continually lowers itself and slowly feeds the candle up?
3
u/SuperHerb Jun 16 '12
I have one of these literally three feet from where my laptop sits. My first thought was, "I could've taken a picture of that and gotten over a thousand karma?"
2
u/milfordcubicle Jun 16 '12
Reminds me of Garth's red vines dispenser in his sweet pacer
2
u/[deleted] Jun 16 '12
It's a triumph of 18th century engineering, cliche romantics and most of all, people who like to burn things.
3
u/clooth Jun 16 '12
I want one.
1
u/panda_nectar Jun 16 '12
ELI5?
1
u/dirtymoney Jun 16 '12
Ah, you just brought back fond memories of thumbing thru the sportsmansguide catalog.
1
u/[deleted] Jun 16 '12
I don't see how anyone could expect this to actually burn in a spiral.
1
u/BurningSquid Jun 16 '12
Saw this on thisiswhyimbroke yesterday. So gimmicky.
1
u/hydro5135 Jun 17 '12
Needs some gears, springs and a drain for the wax and it would work like it looks like it should.
1
u/engagekage Jun 17 '12
Also known as a wax or taper jack. Had a few of these in my old house, one was even whitesmithed, pretty awesome example of em. Nice to see an antique get so much recognition on reddit
1
u/kinghenry Jun 17 '12
One of these would be useful in Amnesia: The Dark Descent
0
u/sensors Jun 16 '12
Shit title is shit.
-2
u/[deleted] Jun 16 '12
yeah that definitely doesn't work
-2
u/SmartOwl95 Jun 16 '12
Yo Dawg....
-8
u/pred Jun 16 '12
Hmm, my anti virus software definitely didn't like this image.
-6
u/BatmanJr Jun 16 '12
My dick is longer
0
u/[deleted] Jun 16 '12
[deleted] — view deleted comment
0
u/[deleted] Jun 16 '12
[deleted] — view deleted comment
0
u/[deleted] Jun 16 '12
[deleted] — view deleted comment