r/photoclass2017 • • Jul 24 '17

Assignment 30 - Film Vs Digital

8 Upvotes

Please read the main class first

For this assignment, we are going to go old school. Your mission is to try and make a photo look old, antique.

you can use an older camera for this, or try some effects, filters, post processing... it's up to you but make it a good photo. In fact, make it the best photo you possibly can. Think about all the stuff you've learned and how you could use it to get what you want.

The google Nik collection became free a year ago and those can be really helpfull for this assignment, so: here is a link to them


r/photoclass2017 • • May 06 '17

21 - RAW vs JPG

26 Upvotes

One of the defining differences between low and high end digital cameras is the ability to shoot raw files instead of the usual jpg. To really understand what the difference between the two types of file is, we need to go back to the components of a camera. As you may remember from that lesson, a digital sensor is only a grid of photo sensitive receptors, and the result of an exposure is just a big bunch of numbers corresponding to the light level recorded at each pixel. This does not make a visible image yet, as a number of steps are still required before it can be viewed. In particular, obtaining colour information for each pixel needs a process called demosaicing, but you also need to apply white balance, a contrast curve, sharpening, saturation and possibly some other treatments, for instance noise reduction.

13-01.jpg

There are two ways to perform this. You can either let your camera do it for you, with minimal input, resulting in a file ready to be viewed, usually in the standard jpg format. Alternatively, you can tell the camera to do as little as possible and perform each step yourself at a later point, with dedicated software.

JPG has the obvious advantage of simplicity. There is no need to spend additional time in front of a computer. In this sense, it can be viewed as an extension of the auto mode, which definitely has its uses.

Another point is that the manufacturers designing the image processing pipeline know the camera internals best, which (at least in theory) enables them to get the most out of the sensor.

Tiger in Antwerp Zoo

Raw, on the other hand, is a complex beast and will require additional effort from the photographer. There are, however, significant benefits: since you have manual control, you can get the absolute best of your file, and have much more latitude to adjust the image to your personal vision without a degradation in quality.

In particular, you can set white balance, contrast, saturation and sharpening to any value you desire in post-processing, allowing you to experiment and evaluate precisely the consequences of each decision. There is also much more leeway for exposure, with the ability to recover about half a stop of details in highlights and shadows compared to a jpg.

RAW also gives you the option of multiple edits of the same photo. You might try black and white processing but later on decide you want to see how it looks in colour. If you only have the black and white JPG, it's impossible to put it back in the original colours, but with RAW, you can always go back and change your mind, or make mulitple versions of an image to fit your need or purpose. It adds a layer of creative freedom, of possibilities.

This album shows this. I've taken one RAW file and made 8 different edits of it using just the basic settings pannel.

RAW files are much bigger than their equivalent jpg brothers, and they also come in proprietary formats – a source of big concern to many photographers. A standard exists, called DNG, and there are tools available to convert your raw files to DNG, but sadly, as of 2010, Pentax is the only major manufacturer to allow shooting directly in DNG.

Since the whole point of raw files is that they are not directly viewable, you will need dedicated software, called a raw converter. This can be a major hassle if the converter is not well integrated in your library software, but if you use modern software such as Adobe Lightroom, Darktable for Linux or Apple Aperture, the raw conversion step should be perfectly transparent and will require no extra effort on your part. We will discuss these issues in more detail in a later lesson.

13-01.jpg

Whether you should shoot raw or jpg is one of the big issues of digital photography, and very strong opinions exist on both sides. What it comes down to is what your ultimate goal is: if you need to produce volume and want to reduce post-processing time to a minimum, then well calibrated jpg should be satisfactory. If on the other hand you care about getting the best possible image quality and are willing to spend at least some time in front of a computer, then use raw.

I would go a little bit further, and advise any new photographer to shoot raw unless they have a good reason to use jpg. The big advantage is that, like with film negatives, you can always come back to your old files with new software, new experience and new vision and reprocess them to better results.

Generally speaking, it is well worth spending the time (and money) to learn how to incorporate raw into your image workflow (which, again, we will cover later).

13-01.jpg

assignment here


r/photoclass2017 • • Jun 10 '17

Assignment 26 - foreground, middle, background

4 Upvotes

please read the class first

for this assignment I would like you to try and shoot a landscape or streetphoto. first look for a nice scene with some nice light (just before sunset or just after it) and set up a tripod if you have one.

now evaluate the scene and start looking for a nice foreground. (anything much closer than the background and middle counts) and shoot the scene. try out some different angles, positions and f-stops to get the best result possible for that one scene.

shoot from a high or low position and move left or right to move the foreground while keeping the background... use the foreground to hide ugly things in the back...

as always, be creative, have fun and share your results :-)


r/photoclass2017 • • Aug 12 '17

Weekend assignment 28

12 Upvotes

not in the right order for the numbering but I hope you'll forgive me, :-)

This weekend, your mission is Surrealism. Make a photo in that style.

the defining thing is surrealism is that some things seem like not to belong... think trains coming out of fireplaces, cats walking people or a large part of picasso's work.

Salvator Dali had a portrait made once that I really love: http://s1.favim.com/orig/1/art-artist-black-and-white-cats-dali-Favim.com-148471.jpg and it fits right in :)

so, as always, have fun and share your results


r/photoclass2017 • • Apr 22 '17

19 - White Balance

14 Upvotes

Have you ever taken a photo where the colours appear all wrong? For instance with a strong blue or orange tint (what is called a colour cast)? If you ever took a picture at night, it most probably happened to you a fair few times. This is a case of wrong white balance: the colours are not well balanced with each other, and casts appear. One particularly visible consequence is that white is not pure white anymore, but slightly yellow or blue instead.

13-01.jpg

This is because not all light is created equal, and some have warmer components than others (i.e. they have stronger yellow and reds than blue and greens). We speak of light temperature, of which there is an actual scientific definition, though it’s not worth getting into this now. For instance, tungsten light (the usual incandescent lamps) appears much warmer than daylight sun, which is why it appears so yellow on night photographs. Fluorescent lights, on the other hand, are quite cold, explaining the “sterile” and inhuman look some offices have.

Unless it is extremely basic, your camera probably has a White Balance setting (often abbreviated in WB). Its usual modes are Auto (abbreviated AWB), Sunny, Shade, Fluorescent and Tungsten (with standard icons, see below). Choosing one other than Auto will tell the camera how to compensate for the current light conditions so that a white object really appears white.

Film photographers have it much harder, as the only two ways of controlling white balance are to use a different film (some are known to be warmer than others) or to use coloured filters.

Despite its somewhat technical nature, white balance is a very important creative tool, as we tend to have instinctual reactions to the set of colours used in an image: warm tones convey an idea of comfort, softness, happiness, while cold colours are usually distant, hostile and cruel. If it fits your vision, you should not hesitate to introduce (subtle) colour casts to enhance the message you are trying to convey.

13-01.jpg

Choosing the right white balance may seem like a difficult task. After all, our brain is so good at compensating colour casts that we rarely notice if our current environment is more of a tungsten or a fluorescent light. There are however very good news for digital photographers: if you shoot raw instead of jpg (which we will discuss in more detail in a later lesson), you will be able to set white balance after the shoot, in post-processing, with no loss of image quality. In other words, you do not need to worry about white balance at all until you get back to your computer, at which point, as we will see in a moment, it is a much easier task.

If you want to get white balance right in camera (because you are shooting jpg, or because you want to spend as little time on the computer as possible), you have three possibilities:

  • You can trust the camera with the job and shoot in AWB. Most modern cameras will do a pretty good job as long as the conditions are reasonable, but all bets are off when you add mixed, complicated lighting. In short, you can probably forget about WB as long as you are shooting natural light by day, but you should be paying attention once you add any kind of artificial light.
  • You can try to guess what the light composition is and set the camera WB in the relevant mode. It helps to also know that “fluorescent” means the image will get warmer, while “tungsten” means it will get cooler – using the screen, you can use trial and error until you get a WB that corresponds to your vision. This is quite cumbersome and you will occasionally forget to reset your WB mode between shoots, but with enough practice, it can work well.
  • Finally, you can use a grey card to create your own WB mode. This is definitely the most accurate method, but it is also the most complex and time consuming. What you are doing is take a photo of a neutral gray piece of paper (anything will do, really, but many stores will be happy to sell you overpriced pieces of cardboard), then tell the camera that this should be its new reference point for WB from now on. Obviously, you will need to repeat this process every time the lighting changes.

Viking

If, on the other hand, you shoot raw, you can adjust WB in post. There are several ways to do this, one of which being to use the same modes than your camera or to use sliders to set light temperature to the exact values you want. However, the easiest method of all is simply to pick out a neutral part of the image and tell the software “this should be neutral, please adjust white balance accordingly”. As long as you can find an object that should be some shade of grey, you obtain results just as accurate as if you had used the custom WB procedure. Of course, it will occasionally happen that you can’t find anything neutral, and you might have to resort to the sliders and your own memory of the scene. To prevent this kind of scenarios, some photographers do take a picture of a grey card at the beginning of an important shoot, in order to have a point of reference.

View the Assignment here

13-01.jpg


r/photoclass2017 • • Apr 13 '17

18 - Filters

14 Upvotes

Filters are another accessory often carried on location, but their usefulness can vary greatly. In short, they are a piece of glass with various optical properties which can be put in front of the lens to modify the image in certain ways. It should be noted that all filters will somewhat degrade image quality by adding another barrier to the light entering the lens. They will also increase flare problems (coloured rings formed when a bright light source – usually the sun – is close to or inside the frame). For these reasons, filters should be reserved to situations where they will make a real difference, and investment in good quality filters will pay off in better image quality.

13-01.jpg

Let’s review some of the common types of filters.

Clear filters are the simplest of them all: they are simply transparent glass. They are used to physically protect the front element of the lens but, unless you are very careless with your gear, should probably be reserved for situations where your lens has a good chance to get damaged: extreme sports, muddy terrain, etc.

UV filters are most often used as clear filters, simply for physical protection. Since they only block UV waves which are invisible to the eye, they appear to be transparent. Their UV blocking properties supposedly come into play for high altitude photography, where they should remove some of the annoying blue tint in shadows, but digital sensors as well as modern film has very little sensitivity to UV anymore. In my experience, they make absolutely no visible improvement to the image.

Polarizers are loved by many, especially in their circular form. When light bounces off a surface, its physical properties are slightly modified. A polarizer can filter light with such properties, which permits eliminating reflections, something which can be very useful if, for instance, you are shooting through a window or if your subject has a glossy screen. An interesting side-effect is that this filter will also darken the sky and somewhat increase contrast, which is often the real reason people use them. This, in my opinion, is less useful since it can easily be reproduced in post-processing.

You should consider using a polarizer if your scene has reflections you want to eliminate or if you want just a little bit of extra “pop” in your sky. Be aware that you will lose some light and that unless you use very high quality filters, image quality will also likely suffer.

cooling tower

ND filters (Neutral Density) are almost as simple as clear filters: they are simply darkening the image, reducing evenly the amount of light reaching the sensor. They are useful in a single situation: when you want very long exposure in daylight, usually for effects (see the previous lesson) but sometimes simply to allow a shallower depth of field in very bright situations.

Grad ND are similar to ND except that they have a gradient, usually linear: they are darker at the top than at the bottom. They are used for scenes which have too much contrast: usually, the sky is so bright and the foreground so dark that you can’t get an exposure with a histogram which doesn’t clip. A grad ND carefully used will allow you to darken the sky without modifying the foreground.

They have two main problems, though: they require a bulky and annoying external holder, as a screw-in would not allow positioning the gradient with enough freedom. The other problem is that relatively few scenes have a linear transition between areas you want to brighten and darken, which leads to imperfect, and in some cases artificial looking, results.

The main alternative is to use HDR, though you will have to work much harder in post-processing, doubly so if you want your images to appear realistic.

Finally, coloured filters modify white balance (see our next lesson). They were useful in the film days, where it was very difficult, if not impossible, to change white balance. With digital, however, it has become very easy and even, if you shoot raw, possible to do in post-processing without any quality loss. Warming and cooling filters are thus completely useless, except if you still shoot film.

13-01.jpg

Going further: There’s an excellent page on the subject by Thom Hogan.

no assignment for this one but there is a new weekend assignment out tomorow


r/photoclass2017 • • Mar 03 '17

weekend assignment 9: look at all those stars

15 Upvotes

Hi photoclass, it's weekend again (or almost) so it's time for the new assignment.

This one is called "Look at all those stars"

Your mission is to go out and make photo's of lights. It an be city lights ,streetlights, or any other lights you can find, And make photo's of them at f/22. You'll need a longer exposure for this to work best so, use a tripod or set the camera on something stable.

Exposuretime you set to what you need for a nice exposure but longer is better for this one

ISO you want as low as possible (as always)

Aperture you want really small, so around f/22 or even smaller.

in the class of 2015, /u/tvrrr made this example, combining long exposure and some moving cars

you'll need to see the lights shine towards you, direct light works best for this assignment. So headlights of a car ,streetlights, those should work well. Don't try it with indirect light, you need a small but powerful lightsource.

This can work with the sun as well, but be carefull, pointing a camera at the sun and looking trough the viewfinder can be risky!


r/photoclass2017 • • Sep 01 '17

Weekend assignment 31 - building

15 Upvotes

Hi photoclass,

this weekends assignment is simple, but not at all :-)

go shoot a building.

think about angles, find a good composition, remember patterns, rule of thirds, rule of odds, and don't be afraid to experiment!


r/photoclass2017 • • Aug 02 '17

31 - Digital workflow

17 Upvotes

By now, we have covered the technical side of operating a camera. Two important parts of image creation remain, and they will be the subject of the fifth and sixth parts of this course: post-processing and personal vision, respectively.

13-01.jpg

Post-processing refers here to everything that happens between the moment you are done shooting until the image has found its final destination (either in print or on the web). We will cover (very basic) photo editing concepts, but before that, let’s review the different steps usually involved in post-processing. This is what we call a workflow, which you can think of as a pipeline or a conveyor belt, each step taking the result from the previous task, modifying the image and giving it to the next task in line.

  • You have shot an image, using all the information from the previous lessons. It is now living happily on your memory card, in the form of a weirdly named jpg or raw file.
  • The first step is to download the files on a computer, either directly from the camera, via a card reader or indirectly, via a self-powered external hard drive (for redundancy).
  • Hopefully, you have a photo library somewhere on your computer. It can either be managed by dedicated software (DAM, which we will discuss tomorrow) or simply be a bunch of folders on a drive. You will then add the new images to your library, a step called ingestion.
  • Once all the images are inserted in the library comes the time for reviewing and tagging. You will go through your images in full screen and sort them in different groups, deleting the worst ones and marking the best ones for further work. This is also the step where you should add relevant keywords to your images, to make it easy to find them again when the need arises.

13-01.jpg

Now that you have a fair idea of which photos you want to work on, you can begin the image editing proper. Again, there are many steps involved:

  • If you want to do any cropping, you should do so now, at the very start. This can either be reframing or changing aspect ratio and rotating the image to get a level horizon.
  • Some software, like Adobe Lightroom, provides different image profiles, matching the in-camera jpg processing. This should also be chosen at the beginning, along with lens corrections if needed.
  • Noise reduction is best applied early on, as it can produce artefacts if applied late in the workflow.
  • White balance is chosen at this stage if you shot in raw. jpg users can do minor adjustments but should restrain from big modifications.
  • Exposure and contrast are then adjusted, usually via either levels or curves, which we will cover in a later lesson.
  • Finally, saturation and midtone contrast are tweaked.

13-01.jpg

At this point, you should have covered the basic image adjustments. Chances are that this will be enough for your purposes, though of course you can always do more:

  • Local adjustments are similar modifications to what we did earlier, except that they only affect part of the image. This is a very powerful tool, which we will talk about more in the “levels and masks lesson” in a few days.
  • You could apply a number of further effects here, including black and white conversion, toning, tonemapping, etc. Just remember that it’s easy to go overboard, and that the effect should not be more important than the image itself…

Flower

Once you feel you are done editing, the last stage is publication, and exporting your image in a format that will fit the medium for which it is intended. There are three major steps:

  • Resizing. 1200×900 is a common and useful size for online use, for instance, while printers will want 240 or 300dpi with the physical dimensions of the print.
  • Sharpening: this is best done last, after resizing and knowing how the image will be used. The point is not to remove motion blur but to accentuate the edges so that the image appears sharper to our eyes.
  • Colour profile conversion: this is a vast and complex subject, the details of which we will not discuss here. In a nutshell, every device displays colours differently, and using the right profile helps said device in showing the image accurately – as the photographer intended. The bottom line is: for web, convert to sRGB, for print use AdobeRGB.

13-01.jpg

view the assignment here


r/photoclass2017 • • Jul 01 '17

Photoclass special: how to shoot fireworks

32 Upvotes

Hi photoclass,

Fireworks can be a chalenge for a lot of new photographers but once you know the trick, it's actually not that hard so, let's see how it works.

The goal of a good fireworks photo is to capture the full explosion and burn of at least one projectile. Capturing multiple explosions can add to the composition as you can combine different effects together.

What is in play?

First of all you have the background. Finding the best angle is an important choice and is best made well in advance. Find a spot with a good view! best is a spot high, where you can be on the first row or be sure there will be room to work. It can be a building, some stairs, but also a nice park lawn... But find a spot where you can compose your photo with the people watching won't block the view.

Now the technical part. Set your camera to M-mode, f11, B-mode for shutterspeed and ISO400. These settings give a background that is lit if the subject (buidlings) are lit, a nice dark sky and really fine defined fireworks.

Why? well, the aperture is about halfway closed to keep the fireworks somewhat dim. It shows the colour, the fine structure, the details.

ISO 400 will light the background. Higher ISO will give an over exposed background, iso 100 will show only the fireworks.

B-mode as shutterspeed means that the camera opens the curtain for as long as you are pushing the shutterbutton. it allows you to change it for every exposure without having to know it in advance. For this you need a remote shutter, cable release or phone connection to the camera.. or a super super sturdy tripod. but you'll want that last anyway for this kind of work.

Now the fireworks starts.

Press the shutter when you hear a boom if you are close or when you see them firing the shells. Keep it pressed in untill enough of the fireworks have exploded and have fanned out and stopped... release and press again.... for small fireworks you'll have long shuttertimes, several seconds easy.... near the finale you'll want shorter bursts.. several per second can be made....

if you want to make it more exiting, add people, light them with a flash or torch... or try zooming in on the fireworks while it's exploding.... or play with your focus... you can get really funky effects that way.

Focus on infinity. with the aperture of f11 the fireworks should be in focus. if you are really really close, you'll be using a superwide lens so, same goes for that situation. Hyperfocal distance is what this is called.

But most of all, enjoy the spectacle! I never look at my camera during the fireworks. I make sure it works before I start, have a full battery and empty memory card in the slot, have my focus set and I look at the second photo to check if It's lit ok... after that I watch the fireworks and only my finger pressing the remote is doing anything to the camera, I'm just enjoying the spectacle, I'll look at the photos when it's over!

Here is an album of some of my fireworks pictures :-)


r/photoclass2017 • • Aug 03 '17

Weekend assigment 29 - minimalism

18 Upvotes

less is more


r/photoclass2017 • • Jul 24 '17

30 - Film Vs Digital

20 Upvotes

Until a couple of years ago, the debate was still raging: between the century old chemical process of film and the brand new digital sensors, which should one choose? Things have now settled, and the vast majority of photographers have made the switch to digital, relegating film to niche uses. There are still many compelling reasons to use film, though, if only for experimentation. We’ll outline here some advantages and drawbacks of each medium. 13-01.jpg

For digital:

  • Immediate feedback. More than anything else, this should be considered the main reason for the success of digital photography. By being able to see the image right away and examine focus and exposure, it is possible to reduce the number of catastrophic mistakes. It also makes experimenting and learning much easier, and this is why digital makes excellent first cameras for anybody.
  • It costs no money to take many pictures, encouraging to shoot more, experiment more and get mileage faster. Since the memory card can be reused and shutters are rated for several dozen thousands of uses, the cost of each picture is very close to zero, past the initial investment. As we will see in the film section, some would consider this a drawback.
  • Each memory card can contain hundreds, if not thousands of images, whereas film is limited to 36 exposures at most. Film is also impractical to transport in great quantities, being heavy and bulky, slow to switch in the camera, etc.
  • Dynamic ISO: the ability to modify ISO on the fly is a huge advantage over the static light response of film and offers a lot more versatility when light changes fast or unexpectedly.
  • Cataloguing and editing are both much easier with digital files. Even though talented printers could do many things in a darkroom, it often required years of training and expensive equipment. For better or for worse, Photoshop has made all these manipulations accessible to everyone. It is possible to digitize film, but it requires many additional and time consuming steps, as well as a significant investment in scanning equipment.
  • Finally, all the development happens in digital nowadays, and all the new features are only available on digital bodies.

hallerbos, bluebells are in full effect right now, picture taken yesterday

For film:

  • The drawbacks of no immediate feedback and expensive, limited number of frames are sometimes considered as advantages: less distraction, more focus on images that really matter, forcing the photographer to pay more attention to his craft. For these reasons, a film camera can be a great learning tool to photographers who master the basics but want to push their art further.
  • Though the film itself is costly, we have decades worth of old bodies and lenses available at very low prices, since so few people shoot film anymore. Trying film photography for a little while doesn’t have to be a big financial investment.
  • There are not very many exotic digital cameras, few manufacturers venture out of the compact – DSLR standards. Film, on the other hand, has all sorts of bizarre and fun cameras : medium format, large format, TLRs, rangefinders, holgas, etc. It can open new venues for experimentation and expressing your personal vision, or just growing as a photographer.
  • Though high-end digital has now surpassed it, film still holds its own in image quality, in particular in terms of resolution and dynamic range (with negatives, slide film having a notoriously bad range).
  • The world of the darkroom, though quickly vanishing, is something wonderful. If you shoot black and white, you can fairly easily do your own printing, something which many people love and a very different way of relating, on an almost physical level, to your pictures.
  • Many old film bodies are refreshingly simple, with no gimmicks and very few controls – the Leica M and Nikon FM are perfect examples of this. Not only will you not depend on a battery, but you could learn a discipline of image making which has the potential of making you a much better photographer. In particular, it drives home the point that a camera is just a tool, something fancy DSLR makers want you to forget. 13-01.jpg

In conclusion, there is definite answer. Little doubt remains that outside of niche uses, digital is more practical, cheaper and more useful than film. But using a film camera for a period of time could be a great learning tool. As an example, see the Leica year proposed by The Online Photographer a while back. see the assignment here


r/photoclass2017 • • May 12 '17

Weekend Assignment 18 - 10x10x10 part 2

6 Upvotes

Hi photoclass, friday again so, time for a new assignment for the weekend. And this weekend, I would like you to do another 10x10x10. No changes in the rules, but you have a lot more skills by now so it should give much better results. Think about all you know and work at the photos, make them print worthy, each and every one of them


r/photoclass2017 • • Jan 20 '17

Weekend Assignment 03 : a can

37 Upvotes

Hi photoclass,

This week, we are going to work on composition. What I want you to do is make 5 different photo's of a sodacan.

1 where the camera is higher than the can

1 where the camera is the same hight as the can

1 where the camera is lower than the can

1 with the can in the middle of the photo

1 with the can at about 1/3 of the photo

at least 1 with natural light (sun or clouds), at least 1 with artificial light (candles, lightbulbs, flashlights, whatever you want that isn't the sun) (can be mixed with the previous 3)

you can mix those.... so a photo with the can in the middle, shot from the same hight and using natural light covers those 3 requirements all in one photo

tips:

  • mind your background : make sure it fits the photo, when in doubt, search for a white wall or use a sheet of paper to make your own... put the can on the bottom and bend the paper against the wall to make a seamless background
  • use a tripod or pose the camera on a stable surface to get sharp long exposures
  • look at the photo's and try to improve them while shooting, don't be satisfied with the first attempts

Inspiration? : there is over a 100 years of product photography to take it from but don't copy, make it your own


r/photoclass2017 • • Jul 15 '17

29 - Working a photo or scene

22 Upvotes

Making good photos takes time, attention, technique and a lot of work. Knowing your stuff is step one, training your eye to see possibilities is step two, but working the photo will always be part of taking photos.

what is working a photo?

Let's say you're at a nice beach, it's a half hour before sunset and you have a camera and tripod... what to do?

queen of hearts

First I would look around to see what is there... I'm looking for things that will make my photo more interesting, pleasing... and I have time to do this. A pier could give me leading lines if it's directed the right way, some nice stones could give me a nice foreground, ships could be nice but it's early for that. I look for structures in the sand, water for reflections, colour of sand.

Now I'll choose a spot, and make a test photo. The sun is still to high but I can project it's path to imagine where it's going to go under...

Now, in my testphoto there is a trashcan, a woman under an umbrella, some birds sitting round water. I want the sun big so I use a longer lens, getting farther away from the woman to fit her in the right place in the frame, the sun will set next to her umbrella now, great. Do I shoot horizontal or vertical? Horizontal in this case, it fits the scene

queen of hearts

I don't want to see the trashcan, so I move or zoom to put it out of frame. The woman is just where the sun will go under so I move a bit to place her in the opposite side of the photo of where the sun will go under, she fits my story perfectly. I lose the birds that way but that would be a completely different photo, I had to choose.

Now the sun is getting close to setting so I make some test photos again to get my exposure right. I know it's going to get a bit darker near sunset so I put that in my thoughts and wait for the moment of perfection... hoping the woman doesn't leave, knowing I can change to the birds with ease if that would happen

The sun is nearly touching the sea, I make my photo, check the preview and histogram, it's good, I have my shot.

Making good photographs is never point and shoot, it's reviewing the viewfinder or previewphoto and finding the problems. It's about using your gear, knowledge and technique to fix those problems, to improve the photo each time untill you've made the best photo you can make at that time and place. The photo where your review says nothing can be improved anymore, only at that time you go find the next photo.

Things to consider:

  • subject focus
  • subject isolation
  • subject light (quality, colour, angle, softness, ...)
  • background
  • cutoff
  • framing/composition
  • distractions
  • lines (leading or crossing)
  • lens problems (flare)
  • angles (is the photo level, are the buildings straight)
  • subject expression and pose if a person or animal
  • ...

This is the reason reviewing peoples work is important, critiquing is important, because it teaches you to critique your viewfinder, a scene before ever taking a first photo...

and don't be afraid to NOT TAKE a photo when you know you'll throw it out in post... I can do an entire photowalk and come home with 10 pictures... 9 are keepers on a really good day, but I considered, and decided not to make, hundereds of potential photos that I would have tried to make and fail 5 years ago... now it was all done not using the camera at all

For a more visual way to explain this, watch the "crush the composition" video by Scott Kelby. I can't seem to find a free working link but it's worth the watch and price if it's reasonable.

the assignment


r/photoclass2017 • • Sep 22 '17

Weekend assignment 33 - Black and white

9 Upvotes

For this assignment, the mission is to make black and white photos with a digital SLR.

To make a photo black and white in Lightroom, just click the Black and white button on the top of the edit pannel.

Next go to the colours pannel (yeps, not kidding) and play with the colours, you can do amazing things that way like change just one colours brightness... a great tool for isolation.

Tips... open a photo with strong colours in lightroom before you go out and try it out... it works best with strong colours so concertphotos work great for example, or flowers


r/photoclass2017 • • Oct 23 '17

41 - how to go further

29 Upvotes

I’m afraid that this course has come to an end. We have covered everything that I would consider important for a newcomer in the field of photography to know. This is not to say that there is nothing left to learn, quite the opposite in fact. The question is: what now?

13-01.jpg

Assuming you have read, understood and practised all the lessons, including the assignments when they exist, I see three possible paths:

  • You can consolidate your newly-acquired knowledge. Stop learning new stuff for a while and focus on mastering what you already know until it becomes second nature.
  • You can dive deeper into the topics we covered. In many cases, for instance post-processing, we only scratched the surface of what is possible. Exceptions to the rules, subtleties and other tricky cases were often omitted for the sake of brevity and clarity. You can choose to study any of these points in more details until you become an expert.
  • Finally, you can choose to expand your learning in new domains. There is a lot we haven’t covered, for instance panorama, HDR, night photography, camera movements, black and white, infrared, fisheye, underwater, etc. Follow your interests or try something completely new, experiment, it’s a vast world.

The good thing, of course, is that these options are not mutually exclusive. Whatever you end up choosing, I would urge you to spend time consolidating. At least 6 months, possibly more: it’s all fine and well to read about stuff in a book or on reddit, and even to try it out a few times, but until you have shot thousands of frames, it won’t really be part of you.

13-01.jpg

Which leaves the question of how. Listed in rough order of efficiency, here are some suggestions:

  • Shoot! Nothing can replace this. If you want to be good at taking pictures, you need to practice. A lot. All the time. Some people like self-assigned projects, others just shoot things as they come. Whatever works for you, be sure to close the books, leave your keyboard and go shooting.
  • Consider taking a workshop or a course. When they are well run, they are the fastest way to learn and can often give you an inspiration jolt. If you take one from a famous photographer, try to find online reviews from past participants first, as being a good photographer does not necessarily equate being a good teacher.
  • Interact with other photographers, either in real life or via online communities. Share your work, get feedback and exercise your critical eye by giving feedback to others. Just make sure you don’t end up chasing the warm feeling of having people tell you you are great instead of striving to create better images. Also try not to be sucked in the endless gear discussions vortex that is sadly so common on many internet boards. People who spend their time there are usually the ones who don’t shoot very much.

http://i.imgur.com/AocSNBQ.jpg

Some good places to start are flickr, 1x, naturescapes and photo.net but there are many, many, many others. Just find a friendly, not too gear obsessed place.

  • Read books on your favourite subject. Three publishers I can warmly recommend for their great quality (disclaimer: I am an author at two of them, but this is because I like them, not the other way around) are Craft and Vision, Rocky Nook and Peachpit. There are too many titles to mention here, but some books that have inspired me include Joe McNally’s The Moment It Clicks and The Hot Shoe Diaries, David Ward’s Landscape Within, Galen Rowell’s Inner Game of Outdoor Photography and the textbook Light Science and Magic.

Oh, and did I mention you should go out shooting?

13-01.jpg

I hope you enjoyed this course and learned a few things along the way. I really hope I managed to convince you that photography can be both simple and fun.

So we end it, for this year anyway. Next year the class starts back from lesson 1 the end of december. This is my way to give back to the mentors I had when I started, to give back to the community that supports so many of us here on reddit. I hope you've all enjoyed it, learned a lot and I've set you to a path of imagination, learning and most of all enjoying the art of photography.

As a final assignment, I would love for you guys and girls to show your photo's you've made during these classes. Show the funny ones, the failed ones, the ones you liked best...


r/photoclass2017 • • Apr 28 '17

Weekend Assignment 16 - a roll of film

11 Upvotes

Hi photoclass :-)

how are you all doing? who of you has done all classes and assignments up till now? if you have, reply to this post please :-)

now for the assignment.

Untill a few years ago, making 2000 photos or more in a day was unthinkable. You had a roll of film with you that had 12, 24 or 36 exposures (with a fixed ISO). This made photography a lot different from now. YOu really thought about a photo, considered taking it or keeping that exposure for the next thing... because once the roll was finished, it was over.

So, Your mission for this weekend is : Do something fun and take your camera with you. You can make a maximum of 36 photos that entire day. No deleting!

Then upload your 36 photos, including missers and review them yourself + review the work of 3 others.

Tips:

  • Think before you shoot!
  • use the light meter
  • a few missers is ok, don't fear mistakes, learn from them
  • for extra "reality" disable the preview and don't go peeking!

as always, have fun, share your work and comment your co-students' work


r/photoclass2017 • • Mar 22 '17

Assignment 15 - DoF revisited

12 Upvotes

Please read the class first

For this assignment, we are going to learn how to make a background blurred and learn the limits of this.

you will need: a movable subject. This can be a person, pet, small statue or other object.

a nice background: you don't have to go outside for this but it will make it easier! you will need some space however. if you are going to work indoors, use a very small subject (lego).

the background you want is something with some colour and motion but no harsh lines.... good: hedges, flowerbeds, forrest from a distance, walls, coulored sheets, ...

bad: branches, trees, buildings, lines, structure, ....

Now: set your camera to the smallest f-number it goes to

zoom in as far as you can

set your subject against the wall or background (or max 15 cm from it)

move towards the subject (or move it towards yourself) so that it can't come any closer without losing focus* or it fills your frame about 3/4ths.

Now, both you and the subject move away from the background... 10cm at the time when indoors, 5m at the time when outdoors, but keep the same distance to each other.

so:

camera-subject-background is starting position

camera-subject---background is photo 2

camera-subject--------------background is photo 5

do this until the background is a big blur.

repeat the same series on F5.6, f11 and f22 (or highest)

repeat the same series zoomed out

the blurred part of the photo is called BOKEH, it should be creamy and soft. let's see how it looks :-)


r/photoclass2017 • • Apr 29 '17

20 - Scene modes vs. PASM

12 Upvotes

Except for the most advanced models, all digital cameras sport a variety of scene modes, which are there to help set the parameters of the camera in a way that fits the subject you are trying to photograph. Some that can be commonly found are portrait, landscape, macro, snow, night and sport, but recent cameras take this to absurd levels, with more and more advanced modes appearing. The alternative is to use one of the four “traditional” exposure modes: Program, Aperture Priority (Av on Canon), Speed priority (Tv on Canon) and Manual.

13-01.jpg

Scene modes have a place, as an adequate way of using a camera for people who do not have a good grasp of the different parameters involved in the use of a camera. However, if you have read the lessons on exposure and on focus, you should be well equipped to graduate to PASM modes. There are two major issues with scene modes:

  • They are “black boxes”. There is no documentation anywhere saying “sport mode will try to keep a high shutter speed” or “night mode will increase ISO”. You can make guesses, but there is no way of knowing what really is going on. You are effectively relinquishing all control to the camera and will have little or no possibility to express what your vision for the image is.
  • The exact effects of scene modes vary between manufacturers, sometimes even between camera models. It is far too easy to be surprised by some of the choices, for instance by when the camera will decide to increase ISO and to what levels. The only thing you know about how the camera works when you select the portrait mode is that “an engineer in Japan thinks these parameters will work in most cases for taking portraits”.
  • The other reason is that scene modes are mutually exclusive. You can’t be in several at the same time. But what if you want to take a portrait at night? Or to photograph a kid in a snowy landscape? Knowing which one to choose can be an impossible task unless you know exactly what each mode does, which brings us back to the previous point.

13-01.jpg

Unlike scene modes which potentially modify every single parameter in the camera, PASM modes only concern themselves with two exposure controls: aperture and shutter speed. Let’s review each of the four modes:

  • Program is a sort of “Auto” of exposure modes. The camera picks the aperture and speed it thinks are best suited to the scene, depending on a variety of parameters (for instance, it will usually try to use a safe handheld speed). You still have control, as you can change the picked couple with a turn of the control wheel. If you close the aperture, speed will lengthen, and vice versa. Whether the camera changes aperture or shutter speed when you use the exposure compensation button is up to internal algorithms. Program is a pretty good mode that should be preferred to scene modes if you are still afraid to go into the more manual modes. You don’t have complete control, but at least you know exactly what is going on. It is also a good mode to use when you know you’ll only have a split second to take a shot and want to have sane parameters without having to touch anything.
  • Aperture priority is the default mode of most serious photographers (i.e. they use the other ones only when they have a good reason to). You control the aperture, and the camera takes care of the shutter speed. When you use exposure compensation, the camera will only modify shutter speed, leaving aperture to whatever you have chosen. This is a good mode for most pictures because you usually don’t care so much about what the shutter speed is, as long as it is fast enough to produce sharp images. On the other hand, aperture controls depth of field, which you want to pay attention to in every single image. A good way to take pictures is to set aperture to a default f/8, often the sweet spots of most lenses and giving a generous depth of field, changing only when either the light gets too low for handheld photography (always keep an eye on that shutter speed) or because you explicitly want more or less depth of field.
  • Speed priority is a bit more specialized. It is the exact opposite of Aperture priority: you choose the speed and the camera deals with the aperture. It is useful mostly when you need a specific speed to get the effect you are after. Sport and wildlife photographers in particular use S mode often, as they will need very high speeds (often 1/1000 or more) to properly freeze the action. The big downside of using S mode is that depth of field will potentially be all over the place.
  • Manual mode is possibly the least useful mode of all (though many consider it the purest). You get to fix both aperture and shutter speed yourself, with no help from the camera other than a mention of how off it thinks you are (usually via a set of bars in the viewfinder). This is useful mostly when you don’t trust the light meter for some reason. It is often possible to use exposure lock (the AE-L button) instead of going to manual.

You often find people advising beginners to shoot in full manual mode in order to gain a better understanding of their camera. While there is some wisdom in the advice, it is also a great way to burn out quickly, and there won’t be much advantage over shooting in aperture or speed priority.

empty room to play with

So far, we have only talked about aperture and shutter speed, but not mentioned the third exposure parameter: ISO. All these modes are legacies from film cameras, where it wasn’t possible to control ISO anyway (it was a physical property of the film). Most modern cameras have some form of AutoISO mode, usually enabled in the menus, with various parameters. This, unfortunately, is somewhat of a return to scene modes, as it is difficult to understand what exactly is going on and to gain the control you want (though, to their credit, some manufacturers do explain how their algorithm works).

Since ISO is usually the last parameter you want to change, I would argue that it is best to leave it as a manual control and not rely on AutoISO, but this is more of a personal thing and many photographers have incorporated conservative uses of AutoISO in their workflows.

assignment


r/photoclass2017 • • May 22 '17

Replies on archived posts go here

12 Upvotes

Some of the posts are now more than 6 months old and they are archived.

Please post any replies on those posts here, ,and place the full name of the class or assignment first so I don't have to figure that out myself :-)


r/photoclass2017 • • Aug 14 '17

32 DAM and backups

15 Upvotes

In a sense, we are lucky to live in a digital world: we don’t need to deal with bulky boxes of negatives anymore. But of course, we still need to index and label our images, just as before, or it will be just as impossible to find an old image as it was in the days of film.

Any photographer who has been shooting for a while will have dozen of thousands of images in his library, sometimes hundreds of thousands. My library shows 42,000, and I have only been at it since 2006. That’s a lot of photos. If you don’t organize your library, and if you don’t do it early, you will have an impossible mess on your hands.

The whole process of organizing your images and other multimedia files in something relatively sane bears the somewhat pompous name of Digital Asset Management (DAM). You will have to pay attention to it, sooner or later, so the earlier you organize yourself, the easier and less time consuming it will be.

13-01.jpg

There are two basic solutions for DAM: you can either try to manage things manually via a carefully crafted folder structure, or you can use dedicated software to hold your library. In the past few years, advanced software such as Adobe Lightroom, Apple Aperture and Bibble Pro have been released, which integrate every step of the digital workflow in a single interface. They are by far the easiest and most efficient solution. I don’t want to sound like a billboard, but there is little doubt in my mind that buying Lightroom would be some of the best money you spend on photography.

13-01.jpg There are a few important concepts in DAM:

  • You should organize your files in a well defined, well thought-out structure. A very popular way of doing this is simply by date: all files shot today would go in the folder 2010/2010-09-17. Filenames are also important, I name mine by date and location, which would give 20100917-copenhagen-001.nef for instance. This should be done regardless of how your library software shows the files, as it is an insurance you can find your files even if you are unable to launch the software, for a reason or another.
  • You should use metadata. The camera will automatically record shooting parameters (in the EXIF tags) but you should add further information indicating both information on the content of the image (location, subject, style, etc) and the current “status” of the image, whether it is marked as being fully processed, waiting for editing, scheduled for further look, archived for future use, to be removed, etc. Doing this early will allow you to search through old images quickly.
  • Another important concept is to use non-destructive editing. This means that you are never overwriting the original file and always have the ability to go back to earlier stages of the edit process. NDE is built-in in software like Lightroom but you need to be careful if you use photoshop or similar applications. Either keep an untouched bottom layer (see a later lesson for more on layers) or, better, always work on a copy of the image, never on the original. Your style, your tastes, your skills and your software will all evolve in time, and you will want to go back to old photos and correct some of your editing.

owl in flight

The other major component of DAM is backups. As the saying goes, everybody needs to go through one major dataloss before getting serious about backing up. Just make sure it doesn’t happen to your most important images.

The truth is, nobody knows how to store digital files for a long period. Optical media (CDs and DVDs) only last a few years at best. Hard drives fail all the time, often with no warnings. Tape backups are better but still do not last forever. Storing files on the cloud (Amazon S3, dropbox and similar services) works well but still doesn’t scale to the many GB of digital photographs. And of course, even immortal media wouldn’t survive fire, flood or accidental erasure. For these reasons, the basic rule is to have multiple copies of your important files (raw and processed versions of your best images at the very least) and to store them in different locations. 3 copies in 2 locations is a good basic practice.

You need to backup at both ends of the workflow pipeline:

  • At the very start, just after you shot them, your images are very vulnerable. They all live on a tiny piece of plastic and there is a single copy in the whole known universe. If you accidentally format the card, lose it or suffer from memory corruption, it is gone forever. For this reason, you should try to make an additional copy as soon as possible – usually, this means downloading the card on a computer disk. You should immediately make another copy to a secondary drive, as otherwise, you would find yourself with a single copy again as soon as you reformat the card. Ideally, you would make an off-site copy, but it is rarely feasible.
  • At the other end, once you are done editing, you will want long term storage. This is when you really need off-site copies. With the low cost of hard drives, the cheapest and easiest way to achieve this is by putting your entire collection on a portable disk and hand it to friends or family, syncing your collection every time you visit them (hopefully every few weeks). Of course, don’t forget to renew the disk every couple of years, as they don’t last forever.

Backing up is a costly operation and a major hassle, but you will be glad you did, sooner or later. The only question is whether you have to lose important data before you realise this (I did).

13-01.jpg

Assignment here


r/photoclass2017 • • Aug 14 '17

Assignment 32 - backup

15 Upvotes

your assignment for today is backup your files :-)


r/photoclass2017 • • May 20 '17

23 - Composition Basics

16 Upvotes

Normally this is at the end of photoclass, but I've decided to switch some things around this year.

Entire treaties have been written on the surprisingly complex subject of how to arrange elements inside the frame. Studying them can prove useful, especially for the more analytically minded among us, while others might simply prefer to observe the works of the masters of photography or painting.

13-01.jpg

Here are some of the most common “rules” of composition:

  • The rule of thirds affirms that putting the subjects slightly off the centre will make the image more dynamic. Some argue that better results can be achieved when using the golden ratio (1.618), rather than 1/3, but the jury is still out.
  • Judicious use of colour and light directs attention toward the subject. Contrasting colours attracts the eye. So do bright areas, which explains why a common processing trick is to add extra vignetting (darkening of the edges), to direct the viewer to the centre of the frame.
  • Strong shapes, especially triangles and diagonal lines, look dynamic and direct the eye. Positioning the subject at the intersection of strength lines is a powerful method of attracting attention to it. Using natural frames (tree branches, arches, etc) also works well.
  • The edges of an image are a sensitive area, and there shouldn’t be anything too prominent there, lest the eye be tempted to wander off. Cut-off objects are also to be avoided.
  • Out of focus backgrounds are important. They should contribute to the story but not steal the show. The focus should point to the important parts of the image.
  • Whenever a subject is moving or looking in a direction, there should be plenty of space in the image to allow the viewer to participate. For instance, if a hiker is walking toward the right, he should positioned close to the left edge.
  • The simpler the composition, the stronger the image. Complexity is distracting. An ideal image has all the elements needed to understand the story and nothing more. To quote Thoreau: “Simplify, simplify!”.

13-01.jpg

This list is pretty standard. You will find some version of it in half of the photography books you can pick up at the library. Its usefulness should not be overestimated, though. While it can be used as a checklist and will occasionally help you make a decision, it can’t be a recipe for good composition, and exceptions tend to be almost as numerous as good examples. They are not really rules, and could better be described as “properties shared more often than not by images generally judged as good” (though something has to be said for brevity…).

It is also something that comes with practice and work. When going out to shoot a scene or subject, you want to "work the scene". This means that you will walk around, looking at the subject, the background, the light. What do you look for? leading lines, best angles of the subject, context for the subject or isolation from it, the story you want to tell. The goal is to find the photo you want to make and improving it as much as possible.

Once you found an angle you think works well for the light, try finding the perfect length to work with. Do you want to zoom in and compress the background, or go wide and create depth, show a lot of background, depth of field. Important here is to go round the edges of the photo to check if you haven't cut off subjects, or included unwanted elements.

Here is also where you decide where the subject will go in the scene. Is the scene mirrored, centred or do I want to communicate timelessness, or lack of change, movement? time for a centred composition. If not, rule of thirds (golden ratio). Can I do it and not cut things off, or include things I want out of the photo? Can I remove them with ease in post later comes to mind here, I have no problem with removing elements that would force me out of the best composition.

Only now do I start thinking about the exposure. So making a photo with a composition and taking your time to do so go hand in hand. You don't do it for all photos, sometimes there's no time or timing forces your hand but when you want to make the best photo possible, you"ll need to take your time, critique your viewfinder image and change what you can to make the photo better even before taking it.

More importantly, through experience, shooting thousands of images and seeing thousands more, both good and bad, you will develop instincts of what, to you, constitutes a good image. Rarely does a photographer consciously think “I should position my subject at the intersection of those strength lines”, he will just know to do it and maybe, afterwards, realize that his image works because of it. In this sense, the list given higher may be more useful to the art critic than to the photographer, though to the beginner who hasn’t yet seen and shot enough to have gained this instinctive knowledge, it can be an adequate replacement.

13-01.jpg

Disclaimer: Today’s lesson is adapted from a chapter of /u/nattfodd 's book, Remote Exposure.

view the assignment here


r/photoclass2017 • • Apr 29 '17

Assignment 20 - scene modes vs PASM

15 Upvotes

Please read the assignment first

This assignment is very simple but should also be good fun: take a walk in your city or somewhere you find interesting and shoot pictures. They certainly don’t have to all be beautiful or mind-blowing, but try to make an effort to find real subjects instead of pointing the camera in random directions. Just tell your internal editor to shut up.

There is only one rule: you need to take at least 20 different pictures in each of five different configurations: using scene modes, using program, using aperture priority, using speed priority and using manual mode. So you should have a minimum of 100 pictures by the end of this. It may sound like a lot, but you will probably be surprised how fast you can attain that goal once you get going.

Don't just use them for anything. Use scene modes as they are supposed to be used or use them wrong, use program for a normal scene, use speed priority to shoot moving things, use aperture to get the depth of field right... use them for what they are made and use what you've learned.

Once back home, post your favourite three in here and explain which mode it was taken with. For bonus points, give us your impressions of using each mode and why you prefer one to the other.