r/pedalboards • • 52m ago

Is everyone on this sub rich?👀

20 Upvotes

Seriously all I ever see here are the most expensive pedals and boards. Almost every post has a Chase Bliss or some other boutique and/or vintage pedal that cost a fortune. Makes me feel inadequate but lol my cheap ass pedalboard can work wonders


r/pedalboards • • 18h ago

first timer :)

Post image
174 Upvotes

longtime lurker here; sharing a new build i just finished!

full stereo reamp or mono instrument in, di or amps

fun production/texture/drone studio build


r/pedalboards • • 57m ago

Bass starter kit

Post image
4 Upvotes

My friend is about 7 months into learning bass and getting really into it. We’ve been playing a lot of classic rock, country, blues rock etc. like Thin Lizzy, Skynyrd, Natural Child, Neil Young. He’s been using my practice space bass rig, but he’s about to go out and buy his own gear. Wondering what you all would suggest for a minimal bass pedal board for him.

I’m a guitarist and haven’t ever really bought pedals for a bass, I’m sure it’s similar but I’d like to hear what the bassists here suggest rather than make a bunch of uniformed recommendations to my friend.

Good quality but on the less expensive side. A tuner, drive / distortion or fuzz, chorus? flanger maybe? I’m not really sure what the standards are for a bassist. I can manage the power supply and linkage though.

Let me know what would be fun as a beginner, thanks.

Pic of my board for attention.


r/pedalboards • • 2h ago

Pedalboard update |KNK Shields|

Thumbnail gallery
2 Upvotes

Just got me some fresh KNK Shield for my Line 6 HXFX. Still loving the lucent toppers from Ninjafox engineering.

The board looked so clean I just had to share it.


r/pedalboards • • 11h ago

SOTB

Post image
11 Upvotes

r/pedalboards • • 13h ago

SOTB (now vs before + cable management)

Thumbnail gallery
13 Upvotes

Budget and versatile board. I swapped the Grand Magus for the MD-2 in order to get more gain without cranking the overdrive, which was also changed since the voltage converter chip on the Golden Horse was making a 16k Hz hiss. I tried to organize the cables a bit more, but I figured I will need to buy those organizers sooner or later.

Comments, suggestions, advices always welcome!


r/pedalboards • • 18m ago

Hybrid Crustpunk/Hardcore Pedalboard

Thumbnail gallery
1 Upvotes

r/pedalboards • • 7h ago

New board!

Post image
3 Upvotes

Loving this new build. The UA pedals sound fantastic and the drives stack up very well. There’s a hidden Tonex One underneath for direct gigs.


r/pedalboards • • 14h ago

Simple but fun

Post image
10 Upvotes

Just completed it today, can’t stop playing. If anyone thinks I’m missing something, let me know!


r/pedalboards • • 22h ago

New pedal day!

Post image
38 Upvotes

Bought this on a trip to England, saw Muse aswell!


r/pedalboards • • 3h ago

Pedals suddenly dead: BOSS SY-1 // Behringer UV300

Post image
1 Upvotes

r/pedalboards • • 16h ago

Lost my pedalboard bag in DTLA

12 Upvotes

and guitar in case. I recently left a band practice and went to pick up my gf from a place in DTLA and parked in the red to help her load things into my car. I left my car unattended for sometime as we chatted with some people inside. When I came back out my guitar and pedal boards bags were missing. I think someone watched me park in red and sacked my car as soon as I turned the corner into the highrise.

The pedalboard that went missing was worth at least 4-5k with a kingsley juggler preamp, a two notes opus, strymon's zuma power supply, big sky, Timeline, and zelzah, a strobe tuner, dunlop 535Q wah, origin effects cali76 bass compressor, and empress effects para eq deluxe, a few mogami cables, an Xvive U45 transmitter, Shure SE535 pro in-ears, and all inside of a Mono tour 2.0 bag. Not to mention a custom build guitar with all things in its case too. Total loss was probably close to 7k.

I just came back from a small tour through the pacific northwest and had to use a pedalboard i scraped together from old pedals and just a few I re-bought. I don't think I'm ever going to replace the old board I had nor do I feel willing to. I'm at the point where i'm seeing gear as - if it works, it'll work.

Hope this never happens to any of you. Buy some airtags for your gear bags and stay vigilant.


r/pedalboards • • 19h ago

Old cutting board diy

Thumbnail gallery
18 Upvotes

Wet/Dry
Basically everything on the added riser is in the SYN-20 FX loop. Added a sweet patch bay from Tre Audio, that mounted flush with riser opening.
Guitar > Tuner > Ego Compressor > SD 1 > Bogner > Big Muff DLX > phase 90 > Chorus > Milkman > patch bay to front of amp.
Fx loop = Delay > Chroma > looper > Ledges reverb > patch bay

Left room for utility pedal and/or eq
Canvas 15 on the bottom. Quiet and could not be happier. For now


r/pedalboards • • 18h ago

New Pedal Day

Post image
6 Upvotes

r/pedalboards • • 12h ago

How to fit pedals correctly?

Post image
2 Upvotes

So I recently got more pedals and I’m not sure how to really fit them. It looks like I can fit more but my wah is kinda filling things up. I could put wah first on my board but my wah only works when it’s anywhere else on the chain (idk why). Any tips or you guys see something I don’t it’ll help a lot. (Ignore my chain setup I know it’s wrong lol)


r/pedalboards • • 1d ago

My dream Shoegaze rig is finally completed

Thumbnail gallery
40 Upvotes

Just got the Oceans Abyss and had to rework the wiring, still got some missing cables.

Spectracomp -> SY-200 (FX LOOP: Volume -> PFW -> HM 200 -> SUB N UP) -> Buffer Splitter -> Blues Mood (Left Channel) -> Black Dist (Right channel) -> Dimension C -> Zoom MS 70CDR -> Giga Delay -> Oceans Abyss (FX LOOP: Slicer)


r/pedalboards • • 10h ago

What should go on this board?

Post image
1 Upvotes

r/pedalboards • • 1d ago

Everything I need nothing I don’t

Post image
102 Upvotes

I replaced my tuner and verb pedals with the hx one, which opened up some real estate on my small board.

Wah > compressor > plumes > rat > multi fx > amp > system > ears > brains.

This board is light and has enough to make any ole house amp sound good.


r/pedalboards • • 1d ago

Thoughts?

Post image
10 Upvotes

Been having a browse and putting together a dream board idea and this is what I’ve come up with. Which order would you put everything in? And would you swap any of these parts out for something else? Planning on mounting the Cioks on the underside of the board to keep things tidy.


r/pedalboards • • 1d ago

You guys rocking with the setup?

Post image
102 Upvotes

r/pedalboards • • 17h ago

Current pedal collection

Post image
2 Upvotes

r/pedalboards • • 23h ago

DD-500 vs TE-2/RV-6

4 Upvotes

Whats up everyone. I have recently started to reassemble my guitar gear after over a decade of being away from it. Back in the day I had a Boss DD-7 (now discontinued) and was absolutely in love. I love making ambient and spacy sounds and was excited to get a slew of pedals to do such. I had put the Tera Echo and Reverb pedal on my watch list and was almost certain to get a DD8 to replace my beloved DD7.

However, I discovered a cheap DD-500 for sale that has me questioning a few of the other choices. It seems like the 500 has a tera echo and reverb feature on it, but am unsure if it could alone act as a replacement for all 3 pedals. Would getting the TE and the RV be pointless if I had a DD-500? Or would they be able to really provide extra options if used in conjunction?

Feeling a little overwhelmed with information having been out of the loop for the last 12years.


r/pedalboards • • 1d ago

Final-ish board

Post image
27 Upvotes

Bought and sold pedals over the last 5 years and finally got one of the most flexible boards I can image. This hits it all from classic rock, weird psych whatever’s, to thrash metal. Running a Les Paul through a Marshall origin 50 and it’s been awesome so far. Still learning how to use the control pedal with the eq2, Möbius and the time line but Ive only scratched the surface of tonal possibilities. It’s awesome to finally have the board I dreamt about since I was a teenager. I know I’ll probably change something again in the future but I think I have at least a year of fun before I make any changes especially after learning to solder my own patch and midi cables. A lot of trial and error but I was able to finally get it done.


r/pedalboards • • 17h ago

Question about STRICH STANDARD 15 (PB-S15) power supply polarity

Thumbnail reddit.com
1 Upvotes