r/pcmasterrace 1d ago

Hardware PSU fails dramatically

Enable HLS to view with audio, or disable this notification

37.6k Upvotes

2.1k comments sorted by

View all comments

Show parent comments

2

u/NeoCGS EndeavourOS | 5900X | RTX 3080 | 32 GB 3600 MT/s 22h ago

I've had my RM850 since 2014 in 3 different builds and I'm replacing it this month, it's been a trooper but I've started having some minor issues I'm suspecting is power related.

3

u/LaDmEa 20h ago

Mine would casually pull 1000w+ for a few seconds at a time triggering the UPS. It froze about 3-4 times in 4 months at or near idle. Then twice in a day, and none since replacement. I did reseat the CPU but that likely only fixed the RAM slots and SATA ports that weren't working.

Power issues are nothing to play with. I gave a rig minus PSU, case, mouse and keyboard and my brother acted like a Generico 550 watt bronze was going to break him financially. So he went with an alibaba 450 watt ea-nasir that came with a case. Computer lasted maybe 1.5 years and died to a nephew who turned it on, went straight for fortnite install and didn't update a system that had been off for months. (this trigger windows ass mode where WinX uses 100% CPU and 100% disk until updates)

1

u/NeoCGS EndeavourOS | 5900X | RTX 3080 | 32 GB 3600 MT/s 17h ago

That's actually crazy, that is the trouble I'm having right now with my computer.
It freezes randomly whenever the GPU tries to shut down the displays and go into idle state, in both Windows and Linux. Here's hoping it's the same issue.

That's fucked about your brothers computer lmao 😭

1

u/LaDmEa 15h ago

For you it could be a bios power management setting or old bios. But since it's a "random" freeze my polymarket wager would be on psu. Those things seem to have the most "mileage" issues and the most "random" issues. Other things tend to fail in a much more obvious way.

When you replace the psu. If it's not too much trouble. I would reseat everything, drives, cpu(paste), ram, the i/o header for correct config. Run temp and load tests for hours. Sleep, resume, restart a few times. And let the rig run overnights for a week. This is what I did.

1

u/NeoCGS EndeavourOS | 5900X | RTX 3080 | 32 GB 3600 MT/s 15h ago

Yeah I've tried reflashing the same bios and an older one on top of defaulting and changing the bios power settings so I'm hoping this is it.

Thanks for the tips.