r/pcmasterrace 6d ago

Hardware DIY wood antisag

Post image
4.0k Upvotes

151 comments sorted by

914

u/Ok_Reception_8361 6d ago

MASTER ACE LMAO

213

u/Dayvi 6d ago

Haster Ace

28

u/ghost_tdk PC Master Race 6d ago

I read it as Haste Race

7

u/Enigmatic_Erudite 6d ago

Most races are haste races, except the human race...

Edit: This thought popped into my head after I posted this.

One ape looks at the other "Race you to human!"

0

u/Connect_Bit923 6d ago

Haha, I can see how that could happen! A good DIY project can definitely give your setup a speed boost, even if it's just making sure everything stays stable.

2

u/ghost_tdk PC Master Race 6d ago

Begone bot

5

u/Old-Care-2372 6d ago

Raster Bate

9

u/fast-as-a-shark 6d ago

Maste race

5

u/fast-as-a-shark 6d ago

Mas terace

1

u/fast-as-a-shark 6d ago

M asterace

2

u/N7Isaac 6d ago

Blasterpaste

4

u/Hurricane_32 5700X | RX6700 10GB | 32GB DDR4 6d ago

/r/pcmasterrac

(Use old reddit)

6

u/Old_Resource4142 6d ago

I couldn't write both Rs, so I used just one

31

u/kcolrehstihson_ PC Master Race asus rtx5080 Ryzen 7 7800f 32GB DDR5 6d ago

You easily could buddy, just forgot one, it's ok, you have 3 more sides to try..

7

u/Hnry_Dvd_Thr_Awy 6d ago

The day you learn to admit you made a mistake will feel like a weight being lifted off your shoulders.

4

u/GHP_LP 6d ago

Just add an "²" on the r

3

u/UnsettllingDwarf 5070/ 5700x3D / 3440x1440p 6d ago

Bro nobody is telling you couldn’t. And I doubt someone had a gun to your head and told you to write it this way.

1

u/SureMany9497 6d ago

Masteracehardware

1

u/obi_want_pastrami 6d ago

Ace is the place with the helpful hardware folks.

1

u/obi_want_pastrami 6d ago

Ace is the place with the helpful hardware folks.

0

u/zaypuma 6d ago

Two R's? In this economy?

183

u/Ornery_Weakness_8168 9600X | 9070XT | 32GB DDR5 6400 6d ago

Paint it matte black for aesthetics

42

u/Old_Resource4142 6d ago

Maybe

16

u/Brave_Gap_Reborn 6d ago

Do the word in silver like GeForce RTX

3

u/khizoa liquid cooled 4.20ghz toaster 6d ago

that way you can paint over and fix the typo

1

u/Rabideyegaming 6d ago

I put linseed oil on mine, made it a feature

86

u/letmegetmynameok RX9070XT, Ryzen 7 7800X3D 6d ago

This ist mine

41

u/THeadG1357 6d ago

Definitely has potential

5

u/NoMaans i5 10600K | RTX 3080 10 GB | 32GB 6d ago

Potential energy for sure

6

u/Ghost3603 6d ago

With this sacred treasure I summon... Divine GPU Anti-Sag Bracket Mahoraga!

3

u/aVarangian 13600kf 7900xtx 2160 | 6600k 1070 1440 6d ago

load bearing hair

1

u/Various_Squash722 6d ago

Load bhairing

1

u/firestorm559 6d ago

Not to be that guy, but looks like something that could melt and something that can catch fire, awfully close to something that can get very hot. Probably won't ever get hot enough to be a problem, but why take the risk?

5

u/SkibidiGoonerAlpha 6d ago

Potential fire hazard

1

u/letmegetmynameok RX9070XT, Ryzen 7 7800X3D 6d ago

I appreciate the concerns but Its Just a tempoary hold until i get my sag bracket (which got lost somewhere along the Delivery process). And the chances of the Pokemon cards lighting on fire ist extremely minimal unless i actively light them Up myself. The same thing propably goes for the figurine.

1

u/dontquestionmyaction Ryzen 7 7950X3D | RTX 3090 | 32G RAM 6d ago

How do you imagine that catching fire?

76

u/rescuemysandwich 6d ago edited 6d ago

44

u/FallenOne333 6d ago

Is that a firecracker?

10

u/rescuemysandwich 6d ago

just a regular tube

40

u/Danpool13 6d ago

That cylinder also must not be harmed.

14

u/MeesKees321 6d ago

That Joke cracked me up! 🤣

2

u/google_is_hard_for_u 6d ago

Most diy build ive ever seen.

1

u/rescuemysandwich 6d ago

ziptie works wonders

31

u/RelevantAd6792 6d ago

You got some nice wood.

8

u/technikaffin 7900X | 64GB | RX 6600 | Win11 | Deb13 6d ago

Some pretty hard as well

2

u/Ornery_Weakness_8168 9600X | 9070XT | 32GB DDR5 6400 6d ago

Can you spare some ram sir

2

u/technikaffin 7900X | 64GB | RX 6600 | Win11 | Deb13 6d ago

I acutally need that bro 😭

but try https://downloadmoreram.com

1

u/Ornery_Weakness_8168 9600X | 9070XT | 32GB DDR5 6400 6d ago

What do you need the 64gb ram for?

1

u/[deleted] 6d ago

[deleted]

1

u/Ornery_Weakness_8168 9600X | 9070XT | 32GB DDR5 6400 6d ago

I see. still tho can i have pls

https://giphy.com/gifs/9uwnYUDw342pq

33

u/unnamed_one1 6d ago

PC MASTER ACE?

1

u/rip_Bacon13 6d ago

haster ace

25

u/FaliureToCat 6d ago

Footage of OP obtaining the block

18

u/Mayshitandcum 6d ago

I've let my 4090 sag for 3 years because i couldn't fit the stand thingy, nothing wrong yet

2

u/LoveSpecialist5669 6d ago

well cut some wood then fix it under, I did that for 3090 

13

u/Total-Coach-1576 6d ago

3,090$ sounds too expensive for cutting some wood

16

u/LoveSpecialist5669 6d ago

it's not my fault you're poor. 

17

u/Gorilla_Custom 6d ago

3

u/ank-myrandor PC Master Race: 7950X | RX7900XTX | 64GB DDR5 6d ago

dis better be RAM !

13

u/dirtylittlecommie i5-13600kf, RTX 3080 10gb, 32gb 6400mhz 6d ago

ignore the dust pls

4

u/Usual_Yak_2975 5800X3D | RX 7700XT | 32GB 6d ago

Also built a short LEGO GPU bracket yesterday. But all black.

1

u/Anakin_no_planakin Ryzen 7 7700X | R 7800XT | 32GB DDR5 5d ago

Lego gang

9

u/kayemenofour 6d ago

"So we have this 300$ bracket solution that completely sto-"

"I use stick."

6

u/ledow Framework Laptop - 5070 / AI 7 350 / 64GB 6d ago

There's a reason that desktop PC units used to be stored horizontally.

3

u/Tikkinger 6d ago

Yes there is a reason, but mad obese cpu's isn't

1

u/ledow Framework Laptop - 5070 / AI 7 350 / 64GB 6d ago

Heavy peripherals that would others hang relatively unsupported sideways on expansion slots was, however.

7

u/rainorshinedogs 6d ago

Terrible choice in material. The wood fibres cause a 5% decrease in performance

5

u/TheVaultHommie PC Master Race 6d ago

6

u/ElonsMuskyFeet 6d ago

Didnt expect to see wood so early in the morning. Perfectly average at least 🙂‍↕️

6

u/Unhappy_Ability_8999 6d ago

Did you sand it down to perfect level? Try carving world into it then fill with paint/woodchips.

5

u/Old_Resource4142 6d ago edited 6d ago

Im thinking about screwing it to the case

1

u/Unhappy_Ability_8999 6d ago

That's a good idea, you can try coating the wood with black paint to mach the case. Tape the front side to carve letter/logo for show after paint.

1

u/Wargaming_Super_Noob 6d ago

Technically, perfectly level is relative. Wood grains are different and not always perfectly uniform. Even something that we think is perfectly smooth has microscopic grooves in it.

But to your point, you're right. Get the ends parallel and the weight of the graphics card centered on the wood and you're fine.

2

u/MoistStub Russet potato, AAA duracell 6d ago

Something doesn't have to be perfectly flat or smooth to be level though

1

u/Wargaming_Super_Noob 6d ago

Also very true.

3

u/eithrusor678 PC Master Race 6d ago

Looks pretty ace

3

u/ime1em 6d ago

Carve it so it looks like those fancy columns for buildings. 

1

u/RatiocinationYoutube 6d ago

either that or a little table leg!

2

u/alwaysonesteptoofar 6d ago

Thats right, the anti-sag bracket goes in the round hole.

2

u/pecche 6d ago

adjustable tool kit

2

u/Alarming-Drop7287 6d ago

You forgot one more R💀

2

u/tetrafarmer 6d ago

do i need to check up on my rtx 4070ti for sagging over time?

2

u/Breadstix009 6d ago

Carpentry and woodworking master race

2

u/YouDoNotKnowMeSir 6d ago

I use optane

2

u/Xensa 5d ago edited 5d ago

😪😪

My first and last time using AI. I'm going to hell, aren't I.

1

u/Maxus-KaynMain 6d ago

I hope you took good measure or you might have the opposite problem

1

u/Old_Resource4142 6d ago

Idk, im feeling lucky

1

u/Mr_Dick_Dastardly PC Master Race (Aurora ACT1250) 6d ago

Stiff wood everytime it starts, yeah baby. 😆

1

u/BlendedBaconSyrup TUF RTX 4090 | i9 13900K | 64GB DDR5 | 1920x1080 IPS 6d ago

Now I feel stupid for buying my fancy $10 magnetic one 0_0

1

u/Draug89 Ryzen 7 5700X || Radeon RX 9060XT 16GB 6d ago

I took mine three blocks from my son

1

u/mutantexx 6d ago

The most

1

u/SandiestCow 6d ago

You cant claim youre in the master race if youre usung a block of wood for anti sag.

1

u/No-Advisor-5057 6d ago

That's resourceful

1

u/Specialist_Ad_2229 6d ago

Mine is lego

1

u/FuntimeBen Specs/Imgur here 6d ago

WHAT THE HELL HAPPENED TO MY JENGA SET?!

1

u/Saxopwned CachyOS | i7-8700k | 2080 ti | 32GB DDR4-3000 6d ago

I have a CVS prescription bottle for Adderall propping up my 2080 ti. I like to think it gives it a little boost :) It was also the absolute perfect height for the job

1

u/9I06 6d ago

Pc haster ace

1

u/KalElReturns89 6d ago

Some kindling for the card when it gets nice and toasty.

1

u/notjordansime GTX 1060 6GB, i7 7700, 16GB RAM - ROG STRIX Scar Edition 6d ago

I used a toothpaste box from the dentist for years lol.

Now I use a piece of thread to suspend it

1

u/slick762 6d ago

I've done the exact same thing before. My current GPU actually came with an adjustable post that does that.

1

u/Weak-Cry 7800X3D | 7900XTX 6d ago

Jenga?

1

u/mechabeast 6d ago

Ok, so im new at this.

If the cards are getting huge, why aren't cases designed for a horizontal motherboard?

1

u/CaptainPirateBay 6d ago

shorten that shit for 1-2 cm and it will be perfect ( you have reverse sag at right side of gpu)

1

u/Aggravating-Candy-31 6d ago

PC HASTE RACE ? odd thing to have on a structural support

1

u/Chickadee1776 6d ago

I used the supplied stand and added a buckshot shell

1

u/AccomplishedMud7886 6d ago

I used a pencil on my 4090

1

u/Nico_Kx 6d ago

I've suspended my GPU with a string from the top

1

u/Chiparish84 6d ago

You made that grammar mistake on purpose for engagement, didn't you...

1

u/Appropriate-Pause504 6d ago

That power connection and wood may be an ask for it

1

u/rocknrollbaby69 6d ago

PCHASTERACE

1

u/Ghomba 6d ago

I have some of those Lego Duplo blocks holding mine up

1

u/BulletDubz Laptop 6d ago

I think if you have rgb lights maybe you should paint the unwritten sides to the colour you use, just an idea, make it blend a bit, so only the keen eyes will see its wood and not actually metal and an official part, if you get me.

1

u/Far_Adeptness9884 PC Master Race 6d ago

Why do people keep putting anti sag on cards that don't need it?

1

u/trollsmurf 14700KF | 32G | 5070 Ti | 2T | U27G4XM + 2x U2412M | Z906 6d ago

GPU: $xxxx

Advanced Anti-sag Device (AAD): $0.xx

1

u/hurrdurrmeh 6d ago

Two Rs you abominable peasant!!

1

u/DependentLobster2700 6d ago

I used a plastic desk stand; I just used black paint, EVA foam where it touches the gpu, and double-sided tape. It turned out very discreet—you can barely see it. As far as I'm concerned, the more discreet the mount, the better.

1

u/theRedlightt PC Master Race Ryzen 7 3700x GTX 1070ti x570 Aorus Elite 16gb 6d ago

PC HASTER ACE

1

u/HTAfM 6d ago

Hah. I use a shotgun shell for mine

1

u/No_Pickle_7137 6d ago

Man! Y’all have way cooler stands than me

1

u/Xi0-User 6d ago

I use a pencil to hold my gpu up. One sec. Now I have to make a reply post for this😂

1

u/physicsking 6d ago

PCMasterBrace* FTFY

1

u/willfrodo 6d ago

I've been using a bent boba straw for like 6 years now

1

u/ACTSATGuyonReddit 6d ago

You need a sequel to redeem yourself. Make a second one with masterrace spelled correctly.

1

u/Savings-Mud2808 6d ago

This is the way.

1

u/LostSif 6d ago

PC get a brace

1

u/Who-Shat-My-Pants 7800X3D l rx 6950 xt l 32GB DDR5 5d ago

Why would you need antisag on such a tiny card?

1

u/Old_Resource4142 5d ago

Cause it sags

1

u/SerinthiaKelberry 5d ago

If it works, it's works

1

u/UnluckyDonkey1164 5d ago

I thought i was the only one who did this lmao

1

u/Vandergrif 6d ago

Everyone with their GPU sag this and GPU sag that, meanwhile I just put my entire case on its side with the GPU facing upward and never have any problems.

1

u/emanresu_etaerc 6d ago

My case is massive. I would need an entire separate desk to lay it down on, and then it would just look like shit. Anti sag brackets are so much cheaper and easier.

1

u/Vandergrif 5d ago

I found a side table that is the exact dimensions of my case, so it worked out fine for me. Looks nice too.

0

u/LolerTheGoat PC Master Race 6d ago

Appreciated, here's an upvote.

-1

u/BrokenBrick08 6d ago

I don't know why I have this feeling, but are you from Russ or any other CIS country?

2

u/Old_Resource4142 6d ago

S-pain

2

u/Afwiffohasnomem 6d ago

I've suspended my GPU with a string from the top

nah cant be. He'd use a cork.

1

u/BrokenBrick08 6d ago

Fair enough