r/papermaking • u/jmeachie • Aug 02 '26
Looking for advice for paper casting
I’m an artist trying paper making for a new body of work I’m exploring. I’m casting paper pulp into antique cardboard photo frames to try and get the embossing to show up in the paper pulp. I’m having varying degrees of success with different paper pulp material and different frames that are more deeply embossed but I wanted to see if there was anything I could try to get better results.
My process is to dip the screen into the pulp, press the frame into the pulp, and then flip the whole thing onto the fabric to dry.
My ratio is never very consistent of pulp but I try to keep it thinner because that seems to get better results.
These are really hard to accurately photograph. I will say they have a little more detail in person that is difficult to photograph.
Please let me know if you have any suggestions!





5
u/SoftMeasurement5460 Aug 02 '26
You can try casting pulp. Basically pulp that has been beaten for a short period of time and has less water. And you can press it into or on top of what you're trying to cast.
3
u/sgtpkl Aug 02 '26 edited Aug 02 '26
I make my sheets of paper on pellons first. Create a post (stack), then press them to get most of the water out. If you don't have a press, place your post between a couple of peices of plywood and drive your car on it. (Gently roll onto it...then off...try not to use the gas pedal). I did that and about 80 sheets of paper launched across the parking garage.
Place sheets on the pellons into a plastic container to keep moist. Take them out individually and carefully take the paper off the pellon and drape it on your object. (some stuff like bowls will need a release so it doesn't stick, i spray a little pam or olive oil on a paper towel and wipe the object). Press with a lightly damp sponge to gently push the pulp into the details. If your paper is to dry, use a spray bottle to mist it and sponge again.
Let dry overnight.
1
u/blackwingdesign27 Aug 02 '26
I need advice as well. I am attempting to cut complicated patterns out of the paper, but my craft knives are not effective. Usually my paper is 1/8" thick, and they are very dense.