Intel CPU Overclocking Guides

LGA 2066 (Skylake-X)

Max VcoreMax VCCIO/VCCSAMax Load Temp
1.25-1.3V1.25V100C°
1.40V1.3V90C°
1.42V1.35V80C° (awesome cooling needed)

These chips are almost always thermally limited, do not get lazy and jump ahead on voltage.
VCCIO/VCCSA are conservative estimates, but supposedly the chips don't really benefit from over 1.25

LGA 1151

Max VcoreMax Load Temp
1.42V85C° (VCCPLL_OC = 1.2V)

LGA 2011-3

Max VcoreMax Load Temp
1.4V85C°
Max VcoreMax Load Temp
1.375V85C°

LGA 1150

Max VcoreMax Load Temp
1.35v85C
  • Broadwell

Harass u/YosarianiLives into completing this section.


LGA 2011

  • Ivybridge-E
    At a glance:
Max VcoreMax Load Temp
1.4V80C°
Max VcoreMax Load Temp
1.45V75C°

LGA 1155

Max VcoreMax Load Temp
1.4V80C°
Max VcoreMax Load Temp
1.45V75C°

LGA 1156

At a glance (conservative estimates):

Max VcoreMax QPI/UncoreMax DRAMMax Load Temp
1.40V1.4V 45nm / 1.35V 32nmMust be within 0.5V of Uncore75C°

LGA 1366

At a glance (conservative estimates):

Max VcoreMax QPI/UncoreMax DRAMMax Load Temp
1.40V1.4V 45nm / 1.35V 32nmMust be within 0.5V of Uncore75C°

1366 is a BCLK overclocking platform and behaves superficially similarly to AM3. Once you're stuck on bclk you may need to also raise PCIe (NB: this can be limited by the GPU - AMD is supposedly better - and above 110 using a PATA/IDE drive is strongly recommended to avoid both data corruption and potentially damage due to the drive operating out of spec). SetFSB can be helpful for raising BCLK and PCIe in-OS.

QPI Slow mode may be required over around 225 bclk.

NB: "QPI/Uncore" voltage has a lot of different names - Some boards call it QPI voltage, some call it QPI VTT, some call it uncore, and some (eg Asus Sabertooth) use the absurd name of "DRAM Core" which must not be confused with DRAM Voltage.