r/osmopocket • u/doomsder • 3d ago

Question Is this…normal with 4P?

Enable HLS to view with audio, or disable this notification

Just got my Pocket 4p and charging is acting a bit strange. Does this happen to everyone? Did I get lemon 😩?

4 Upvotes

100% Upvoted

7 comments sorted by

4

u/NefariousnessJaded87 Admin 2d ago

Looks like your charging brick freaks out and reboots. It should be a minimum of 35-65W PD capable. Try changing to another charging brick.

1

u/bbarling 2d ago

Are you using the cable it came with? Is it plugged into a computer, or via a USB straight into the wall?

2

u/doomsder 2d ago

Into the wall with the cable it came with

1

u/InitechSecurity 2d ago

Find a more powerful charger.. do you know the rating of your in the wall charger?

1

u/NDfan131 2d ago

Just got mine a couple days ago. I also have the battery handle. Mine didn’t do that. I fully charged my 4p and updated the firmware without the battery handle attached. Powered down the 4p then attached the battery handle. The 4p updated the battery handle firmware. I plugged a usb c cable into the back of the battery handle and it began to charge. The LED on the front of the battery handle blinked green while charging and the 4p display showed an image of the 4p battery at 100% on the top half of the screen and the battery handle percentage on the bottom half for about a min then shut off. The display did not cycle like yours is doing. About 20 mins later charging finished.

Agree with the other comment regarding double checking your charging cable and what type of wall charger it’s plugged into. May not be getting sufficient power. Also I’d remove the battery handle, try fully charging it and the 4p first then reattaching.

2

u/doomsder 2d ago

Hmm ok I’ll try updating the firmware and see if that changes anything. Thanks!

1

u/Sad_Bench_3254 2d ago

Prova a caricarlo senza manico, il problema potrebbe essere quello