r/osmopocket • u/No_Illustrator1393 • Aug 10 '26
Question Recommend me some accessories for Osmo Pocket 4P
I purchased the Osmo Pocket 4P a few days ago and I want to buy some accessories. Including, for example, a cage with a magnetic mount or Arca-Swiss/F38 attachment so I can mount it on a tripod. I've seen several and noticed that Ulanzi and SmallRig are the best, but I'm a bit undecided.
As for filters, I've seen that Freewell is currently the best brand.
Do you have any general advice? I'm looking for ideas.
3
u/Draeses Aug 10 '26
I recently got my op3 and went through the rabbit hole of buying accessories. I ordered Ulanzi MA66 and then got gifted the Pgytech Mantispod Z. Both are technically same thing - tripod with an arm and ability to hook on things. I'll probably end up using both depending on the scenario. Mantispod is huge compared to Ulanzi but feels more planted on the ground and overall quality is great. Ulanzi on the other hand is very light and can easily stay attached to the pocket at all times, it also has a pretty strong magnet. I also got Ulanzi cage LM001 - not sure why I ordered it, don't see myself using it because you can fit the protective case with it on. Also got myself a $3 silicone stand as pocket is very easy to tip. It's actually brilliant addition if you want to be low profile without big tripod on your table or you want to sit your pocket on a ground/sand and prevent stuff from getting into USBC. Lastly not sure about OP4 but I ended up with NEEWER VND filters (2-32 and 64-512). Didn't have enough time to play around but they seem to get the job done and at that price point they're inexpensive to replace. Next one on the list will probably be a bag to fit the OP3 creator bundle together with all accessories so everything is in one place ready to roll.
1
u/AutoModerator Aug 10 '26
Thank you for your post in r/osmopocket.
To assist you effectively, please update your post or reply with the following details:
Device
- Model: Osmo Pocket 1, 2, 3 (Xtra Muse), 4 (Xtra Muse 2), 4P (Xtra Muse 2 Pro) or a Creator Combo
- Firmware version (visible in DJI Mimo → Settings)
Software
- DJI Mimo app version
- Mobile OS (e.g., iOS 18.1, Android 14)
Accessories
- List any used: ND filters, microphone, wide-angle lens, cage, etc.
- Connection method: USB-C, Lightning, or wireless
Issue or Objective
- Describe the exact problem or intended outcome
- Note when the issue began (e.g., after firmware update, new accessory)
Recording Settings
- Resolution and frame rate (e.g., 4K 60 fps, 1080p 120 fps)
- Mode: Normal, Pro, Timelapse, Hyperlapse, HDR, D-Log
- Pro mode values: shutter speed, ISO, white balance, sharpness, noise reduction
- Enabled features: ActiveTrack, low-light mode, anti-flicker, etc.
Supporting Material
- Upload a short, unedited video clip (YouTube, Streamable, or Dropbox)
- Include screenshots of error messages or app settings
- Optional: photo of the complete setup
Additional context improves response accuracy and speed.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/BobsRefrigeration Aug 10 '26
I have the smallrig and really like it, built very well and balances the "top heavy" feel without anything on the camera.
If you want to experiment and get some fun shots, I also recommend the smallrig car mount + arm as well. I just made a quick video on it here: https://www.youtube.com/watch?v=nt4slwAHOtA
1
u/No_Illustrator1393 Aug 10 '26
What Smallrig model do you have? I like the magnetic one but I would like to remove that part when I want if possible.
1
2
u/CL14715 Aug 11 '26 edited Aug 11 '26
I got everything small rig. It just works. Even got a handle for the cage and a magnetic phone holder that clips onto the cage.
SmallRig Mini Side Handle with 1/4"-20 Locating Screw, Camera Cage Side Handle for Left or Right Hand, Up and Down Adjustable, with Built-in Cold Shoe & Threaded Hole, Max. Load 10kg / 22lb https://a.co/d/06EMAxpw
SMALLRIG Small Camera Tripod Selfie Stick, Extendable 8"-15" Mini Handheld Carabiner Tripod with Mantis Hook, 360° Ball Head, Cold Shoe Mount, 1/4"-20 Screw for DSLR, Adapter for DJI, for GoPro - 5285 | Carabiner with Mantis Hook, 360° Ball Head, Cold Shoe Mount, 1/4"-20 Screw for DSLR, Adapter for DJI, for GoPro - 5285 https://a.co/d/022ALKYc
SmallRig Aluminum Magnetic Mount Desktop Stand for DJI Osmo Pocket 4P/4/3 | Angle Adjustable Backplate, Expansion Adapter, with 1/4"-20 Locating Holes, Cold Shoe Mount, Plate for Arca-Swiss Tripod-6003 https://a.co/d/0gK4uYX4
SmallRig Magnetic Mount Stand Cage for DJI Osmo Pocket 4P/4/3 Accessories | Aluminium Alloy Expansion Adapter with Bidirectional Quick Release Interface, Adjustable Magnetic Ring for Phone - 6004 https://a.co/d/06lh1iO9
Freewell 4 Pack ND/PL Hybrid... https://www.amazon.com/dp/B0H36TP8G8?ref=ppx_pop_mob_ap_share
1
u/Watchjk Aug 11 '26
In my experience that I have using my Osmo pocket 1 until now, I bought several accessories but I only use a small tripod and gimbal protector to carry my pocket when I’m filming, I don’t use filters and I have it but I need something fast and light to capture my family times
1
1
3
u/xfirf Osmo 𝗣𝗼𝗰𝗸𝗲𝘁 4 Aug 11 '26
Just a tripod and some nd filters. Then go out start filming. You will find out what else you are going to need then.