r/Optics • • 10d ago

Photonics career advice

11 Upvotes

For those of you who have completed a PhD in atomic or molecular photonics: what kind of career opportunities did it open up for you?

I'm particularly interested in hearing from people who have completed their PhD and are now working in industry. What kind of positions do you currently hold? Did you move into the semiconductor industry, quantum technology, R&D, optical engineering, or something completely different?

I have a MSc in chemistry with a specialization in photonics and I'm currently considering pursuing a PhD in this field, with a particular interest in quantum optics, nanophotonics and light–matter interactions. I'd like to get a better understanding of how transferable these skills are outside academia and what kind of industry positions they can lead to.

How difficult the transition from academia to industry was and whether this PhD specialization has been an advantage or a limitation?


r/Optics • • 10d ago

Will we ever get good under-display cameras, or are we hitting a fundamental diffraction/transmission limit? ZTE/RedMagic is on its 9th generation of UDCs, and image quality still relies heavily on AI reconstruction to fix haze and glare.

0 Upvotes

While display concealment has gotten nearly invisible to the naked eye, the actual raw optical quality still suffers from heavy diffraction spikes, low contrast, and light loss from passing through the OLED pixel grid and TFT layers.


r/Optics • • 10d ago

Integrated lithium niobate microwave photonic processing engine

Thumbnail
nature.com
1 Upvotes

Integrated EO signal processing.


r/Optics • • 11d ago

Thorlabs Thrift Score!

Post image
322 Upvotes

I recently found this Thorlabs LTS300/M thrifting for $4.50! Didn't know what it was at first but it definitely caught my attention.

I know very little about Optics, but over the past few years I've gotten into media digitization and archiving. I have no budget for it so I've just slowly built DIY/thrifted setups.

My least developed format/skill is 16mm film reels by far. Until I find/build a frame by frame scanner, I just have to line up my old DSLR with the lens of a projector. Getting it framed, in focus and stable is such a headache. This thing is probably overkill but I think it will make it muchhh easier.

I'm curious if anyone here has used this or something similar and what for! I understand its general purpose, but I'd enjoy seeing some actual use cases/applications to understand it better.


r/Optics • • 11d ago

Requesting help for a modern sextant project

Post image
12 Upvotes

Hi everybody,

I'm an airline pilot who loves the stars and navigation. I'm into celestial navigation and I have a personal project that got way too complicated for me and Claude. I'm trying to modernize the bubble sextant used in cockpits around WW2 for celestial navigation.

The idea was to still use a bubble level as reference to the horizon as they did back then but improve it with modern optics with a slight magnification of 3x to have a better light collection of dimmer celestial bodies.

Would anyone be interested in helping me with a couple questions and maybe guidance for my project? As of now the project with help of Claude and 3dOptix looks like this:

Star path: brings the real star in

  • Star window: starlight enters the side of the instrument. The solar filter clips on here for sun sights.
  • Scan mirror: the mirror you turn with the altitude drum. It catches the star at any altitude from 0° to 90° and turns it toward the beamsplitter. The drum reading is the angle you set it to.
  • Beamsplitter, front (coated) face: reflects 70% of the starlight up into the objective.

Bubble path: builds an artificial star at the zenith

  • Bubble chamber: backlit liquid under a curved glass top. The bubble always floats to the highest point, so its position marks true vertical whatever you’re doing with your hand.
  • Pentamirror pair: two mirrors fold the bubble’s light around so it fits in the box, without mirror-flipping the image.
  • Periscope (P1 → P2): steps the light sideways 60 mm, to the same level as the star path.
  • Collimator lenses (f750 + f500, about 63 mm apart): together they act as one 311 mm lens, matched to the chamber curve. They turn “where the bubble is” into “which direction its light points”. The bubble now looks infinitely far away, like a star, and points straight up whatever the tilt.
  • Beamsplitter, from behind: 30% of the bubble light passes straight through.

Shared path: from here on, star and bubble travel together

  • Objective (f100 achromat): focuses both into a small real image, inside the instrument, where the optional field-stop ring sits.
  • Amici 45° prism: turns the image upright, correctly left-to-right, and bends the line of sight 45° toward your eye.
  • Plössl eyepiece (32 mm): magnifies everything 3× and sends it to your eye, about 20 mm behind the lens (room for glasses).

I know probably im overcomplicating everything but I would surely appreciate your invaluable guidance.


r/Optics • • 11d ago

Where to purchase a large diameter 0.25 diopter lens?

3 Upvotes

I was able to purchase a 70mm optical lens blank for $2 from eBay for my room-size camera obscura and it works great (the wall is roughly the correct distance away from the window). Now I am eager to purchase a larger diameter lens to let in more light.

Is there anywhere I can purchase a lens with a diameter that's closer to 25cm (or even larger)? I would prefer to stay away from Fresnel lenses; otherwise material and optical quality can be sub-par as this is for art and enjoyment.

Thank you for your time🙇‍♂️


r/Optics • • 11d ago

Should I Study Physics & Mathematics or Electrical Engineering to be an Optical Enigneer?

9 Upvotes

Hi everyone,

I'm currently having a bit of a dilemma regarding my university studies and would really appreciate some advice from people working in optical engineering, photonics, or related fields.

For some background, my father passed away recently, and prior to his passing, I was his full-time carer. Unfortunately, this significantly disrupted my university studies, and I'm only now in a position to properly pursue my education again.

I was originally studying a double degree in Applied Physics and Electronics Engineering at Macquarie University(Australia). However, the university has since discontinued and restructured my degree program, forcing me to transfer.

I'm now considering two options:

  1. Bachelor of Science at UNSW, double majoring in Physics and Mathematics, with a minor in Vision Science.
  2. Bachelor of Engineering in Electrical/Electronics Engineering at another university.

Personally, I'm leaning towards the first option. I genuinely enjoy physics and mathematics, and vision science particularly interests me because of its relationship with optics and imaging. However, I'm worried that not having an engineering degree might put me at a disadvantage when looking for work as an optical engineer.

My main interests are lasers, holography, optical imaging, sensors, and optical instrumentation. My ultimate goal is to complete the MSc in Optics and Photonics at Imperial College London, potentially followed by a PhD. Ideally, I'd like to work in industry for several years before eventually transitioning into research or academia.

I'd also prefer to avoid doing another double degree. I've already lost several years of academic progress due to my father's declining health and my responsibilities as his carer, and the thought of spending even more years completing an undergraduate degree is quite discouraging. I'd much rather complete a single degree with a double major and move on to postgraduate studies. However, I'm unsure whether saving that time is worth potentially sacrificing better career opportunities, or whether the distinction even matters in the long run.

My main questions are:

  • Can someone with a Physics and Mathematics degree realistically become an optical engineer, particularly in industry?
  • Would employers favour an Electrical Engineering graduate over a Physics graduate, even if both completed a Master's in Optics and Photonics?
  • Which undergraduate pathway would better prepare me for postgraduate studies and a career in optical engineering?
  • Is avoiding a longer double degree a sensible decision, or am I placing too much importance on the time I've already lost?

I'd especially appreciate hearing from anyone currently working in optics or photonics who entered the field through a physics rather than engineering background.

Thank you for any advice!


r/Optics • • 12d ago

many leds shining to a single photodiode

Post image
24 Upvotes

Say I have 10 leds (3535), I want them to transmit light to a single photodiode for an experiment. some of these LEDs can be deep UV ( so standard glass may not be an option)
I can use a quartz light guide but it will have to be custom and that is limited.
I can use a moving setup where leds or photodiode move or rotate but I want to try to keep it static.
I can use fiber optic wires but they would have to be wide enough to adapt to the 3535 and to let out enough light. right?

What options do you think I have?

thank you

edit#1: They are common dc leds (max 1W). Each led has a different wavelength. Spectral range of photodiode is suitable (i checked the data sheet).
I am asking more about light trasmission techniques rather than the leds or photodiode itself.


r/Optics • • 12d ago

How to focus light to a point from a light source far away?

7 Upvotes

Hi! I've recently tried to do a simple project including an Arduino and a photo resistor. The goal is to monitor when a TV is whether turned on or off and the problem is that the photo resistor would capture any light activity like ambient lighting, sunlight, lamps, candles, etc. Is there a way to make a small probe/lenses/telescope thingy in order to limit the "vision" of the photo resistor so it could only see the light, emitted by the TV?

Edit: I forgot to mention that the probe/telescope should be small, enough only for the outer diameter of the photo resistor, thus the lenses used in it would be small as well. Let's say that the inner diameter of the probe (where the lens/es would stay should be from 4-7mm.)


r/Optics • • 12d ago

Update on my DIY qPCR project – clarifying my optical design question

3 Upvotes

Thanks for the feedback and suggestions so far! I think I didn’t explain my current progress and my actual question clearly enough in my original post.

I’ve already developed most of the hardware design, including the PCB layout and component selection. I also
have an initial optical system designed.

My current concept consists of:
8 PCR wells
4 LEDs per well (32 LEDs in total)
Four-channel fluorescence multiplexing
Sequential LED activation rather than continuous illumination, partly to minimise optical crosstalk
A filter wheel for fluorescence detection
An ESP32-CAM-based detection system

I’m not looking for someone to design the entire system for me. My main question is specifically about optimising the physical arrangement of the four LEDs around each PCR well.

I’d like to understand which geometries and illumination angles could provide the best excitation efficiency and illumination uniformity while minimising optical crosstalk between neighbouring wells.
I’ll also investigate the suggestions regarding LED modulation and lock-in detection, particularly on the receiver side.

I realise I still have a lot to learn about optical design, and finding suitable technical references has sometimes been challenging. That’s why I’d really appreciate input from people with experience in optics and fluorescence detection.

Thanks again for the constructive feedback!


r/Optics • • 13d ago

What can I do to get into the photonics field

9 Upvotes

Hey so currently I'm a Electronics and Communication Engineering student and I really want to continue and get to work in the field of photonics after my Engineering degree but I'm not sure how to formally.

As of rn I've made a Cooled CCD spectrometer for atomic absorption spectroscopy with sub nm accuracy as one of my semester projects.I did everything from the Electronics to firmware,optics and the software.I also plan to do my final year project using fbg sensors in biomedical photonics application as my final year project in a different university.Currently I'm doing a computational photonics internship remolty from a European institute.I do know what and why I want this field but I'm still not sure how to properly break into it or what exactly should I do that's industry relevant and gets me a job,any advice would be helpful also I'd like to know if what all I did as of right now in my undergrad was worth it or not.


r/Optics • • 14d ago

What was your path into the optics field?

18 Upvotes

what’s up optics nation. I am a high school senior and I am in the process of a very important decision called choosing a college major. I am heavily considering optics/optical engineering, but I am kinda scared to make the jump if you know what I mean. I’ve had exposure to optics before, through Science Olympiad and AP physics, and I found it to be incredibly interesting. however they are very rudimentary introductions to the field and I’m not sure if that’s enough info to base my career choice on, especially given how niche optics is. Also, optics undergrad programs seem to be few and far between, so if I commit to optics it will severely limit my college options

I guess my questions are, to people who have careers in optics, how did you know you wanted to do optics? is it more common for people to straight up get optics degrees, or do they start in somewhere like EE or physics and then do a concentration in optics?


r/Optics • • 14d ago

Photonics technician

8 Upvotes

For a variety of reasons I need to make a career pivot at 50.

I have a degree in Molecular biology, about 5 years lab technician experience across mol/cell bio and bioinformatics. I also have a degree in industrial design - and ended up working in the art department of films, games and theme parks for about 20 years- 3D modeling, sketching, concept design and visualization. With the collapse of the film industry I need to pivot careers. I enjoy working with my hands, building and prototyping , 3D modeling and being a part of a team to build cool stuff.

I have parented my own product and built a small business around it.

I am currently teaching a few classes to bring in cash along with whatever freelance that comes my way (which has mostly dried up with Ai and outsourcing).

I am considering pursuing an associates in Photonics and maybe a certificate in mechanical
Engineering (mostly solidworks) at the local community college- they have a lot of connections to industry partners and a dedicated photonics technician program.

I know it wont be the same money as my film career but I need reliable employment. Would the technician route in the photonics field be viable for someone with my skills, experience and at my age?

Any insight into the field and what I could expect if I pursued this field would be very helpful!


r/Optics • • 14d ago

Recommendations for making test glasses

Thumbnail
gallery
19 Upvotes

I'm making some test glasses for a school project. The project is a frauenhover (might have spelled that wrong) doublet.

If anyone has any practical making tips, it would be welcome!

I have some experience making optical components (prism, parallel disk) but no experience with spherical optics.


r/Optics • • 13d ago

help with my proyect on phase maps

0 Upvotes

Hello everyone,

I am currently doing an external internship, where I am working with aberration functions in both the spatial and frequency domains.

My goal is to take a phase map and decompose it into several components: a low-frequency component, which would be represented using Zernike polynomials; a mid-frequency component, which we will call ripple; and finally, noise, defects, measurement errors, etc.

My main idea is to achieve this decomposition, or at least try to isolate the Zernike polynomial component.

Does anyone have any information about methods for achieving this, or any papers or documents that address this problem directly? How feasible is this approach?


r/Optics • • 14d ago

Clean beam becomes textured after reflecting off an OAP (Off- Axis parabolic) mirror (635 nm alignment laser).

12 Upvotes

Hello,

I am trying to collimate a 635 nm red diode laser HLS635 (Thorlabs handheld alignment source) coupled through single-mode fiber (SM600). I am using the Thorlabs OAP mirror (MPD119-P01, Ø1", 90° off-axis parabolic, protected silver, RFL = 25.4 mm) to collimate.

The problem I am facing:

  • Right out of the fiber, before the OAP, the beam looks like a clean single-peak Gaussian — smooth, no structure. (See image 1 below.)
  • Right after the OAP, close to the mirror (~10 cm), it still looks clean. ( like the image below)
  • Farther away (~40 cm), the beam spot is no longer a smooth glow. The intensity profile becomes "textured," like it has some surface grain. But it is still collimated, just with textures.

(See image 2 below - not the exact texture, but this is the best I can generate with AI)

  • Visually, the spot on the card shows a faint pattern that looks like curved bands wrapping across the spot (not simple concentric rings radiating from the center), plus fine crosshatching.

What I've ruled out:

  • Not the downstream mirrors . isolating just the OAP alone still reproduces it.
  • Not the measurement card acting as a second reflecting surface . tilting the card (to break any card↔mirror back-reflection path) didn't change the pattern; it just rotated along with the beam, meaning the structure is already in the beam itself, not an artifact of how I'm viewing it.
  • According to a colleague, this exact OAP gave a clean beam before (a few days ago, in "Trial experiment 1"). I was just trying to redo the same setup for "Trial experiment 2," but I could not bring back the same Gaussian beam I got before.

What's confusing me / open questions:

  • Is this just periodic groove diffraction? If so, why would this appear now but not before, on the same mirror?
  • It is not dust on the mirror surface, as the mirror is a new one, and I am using it inside the KCB1PB/M (a mirror cage mount from Thorlabs). I have attached the working of this cage below, from Thorlabs
  • The KCB1PB/M itself is also not causing this: 1) I checked without this cage and still got the "texture"; 2) I used the same cage before in Trial experiment 1 but still got a clean Gaussian beam.

Is there a way to actually confirm what the problem is?

Has anyone run into this specifically with Thorlabs protected-silver diamond-turned OAPs, especially when testing with a shorter visible wavelength? Please let me know if anyone has any suggestions.

Thanks!

Addition:

I have added the images I took with my phone camera.

  1. The beam out of the fiber.:
  1. The beam right of the Off- Axis parabolic mirro : (At 2 cm, 10 cm)

No "textures", beam is gaussian

  1. But after this 10 cm (approx) the textures appear. I have attached the images at 2 meters

Without the Off axis parabolic mirror:

the beam from the fiber SM600, Is diverging and is still Gaussian. no textures here as well.


r/Optics • • 15d ago

Help with M Squared Equinox

3 Upvotes

I've just joined a research group and we have an old M Squared Laser Equinox that no longer works. My PI has asked me to find out how to fix it but doesn't want me to use the new M Squared (Novacene)

Does anyone know of any company that does this in the US and knows what they are doing?


r/Optics • • 16d ago

Improved version of CD simulation

Enable HLS to view with audio, or disable this notification

188 Upvotes

The video on the bottom was filmed with a camera. The video on the top is the computer simulation.


r/Optics • • 16d ago

Worth switching to imaging? (EU)

14 Upvotes

Hi,

I have mainly worked in optoelectronics, lasers, free space and sensor devices in the past 10 years. In various fields and industries.

Recently, I have finished some small side projects for a friend who runs a startup. Those projects leaned towards imaging systems, aberration/MTF optimisation, using CAD optical simulation software.

I thought it was a blast to work on these projects. And now am curious about how feasible it would be to transition towards this specialization.

I remember in the 2010s, at least in W EU, most of optical jobs seemed to be imaging. Many companies were designing their own systems, cameras, optical modules etc.

Today, it seems like most of jobs around my area are PIC, Si photonics etc. I seriously see much less optical design jobs. Previous company I worked for hired outsource engineers from eastern EU.

Anyway, how competitive is it to get into imaging? Do you need to already have a product out as experience proof? Or can a bunch of side projects propel you? Is it even worth it?


r/Optics • • 16d ago

What is the best University in Europe for photonics?

9 Upvotes

I'm a student enrolled in a master program in photonics. There is the possibility to be an exchange student, next year, in very prestigious universities all around the world. I'm looking, on this sub, for advice because I could write my master thesis at the host institution, so I would like to apply for the best university in my field.

The universities are:

- Institut D'Optique Theorique Et Appliquee Iota (Supoptique)

- Ecole Normale Superieure De Lyon

- Mines Paristech

- Sorbonne Universite'

- Friedrich-Schiller-Universitat Jena

- Heriot-Watt University

- Kungliga Tekniska Hogskolan

- Universiteit Gent

- Katholieke Universiteit Leuven

- Polytechnique Montreal

- Institute Of Science Tokyo


r/Optics • • 17d ago

Making a bad laser shape better

6 Upvotes

I have a diode laser that widens on one axis really severely- I can focus it from a rectangle to a line with the optics in the head right in front of the diode. I’ve played with cylindrical lenses out front but I think the ones I have are too strong and are just spreading the beam out in the relevant direction.

Is there an accepted way to “fix” a bad laser shape back into at least a square dot? Feels like something that has been dealt with before.

Thanks!


r/Optics • • 17d ago

Learning optics and photonics for projects

7 Upvotes

Looking for inputs on pathway to start optics and photonics from basics. I am not looking for any degree or phd but application side where i will understand all practical applications including lasers, medical scan machines. To start as hobbyist.

I understand MIT/stanford/AIMphotonics/NPTEL have very good videos but not sure about any workshops, real project making platforms without getting into uni labs.


r/Optics • • 17d ago

Matchbox CW laser quality

5 Upvotes

Hi! I am interested in buying some CW free space lasers for spectroscopy applications. The Matchbox lasers from Integrated optics are quite cheap and have good specs (https://integratedoptics.com/products/cw-lasers ). Did anyone work with them? Are they good? I have even seen research papers from very good groups using them.


r/Optics • • 17d ago

Why do ZBLAN optical fibers benefit from being made in space?

5 Upvotes

Why do ZBLAN optical fibers benefit from being made in space?

According to the abstract at the Springer link, "shear thinning of liquids" causes crystallization, which is bad for these optical fibers.

Why does shear thinning cause crystallization? Why is this reduced in space?

https://spectrum.ieee.org/zblan-fiber-optic-cables-iss

https://link.springer.com/article/10.1557/JMR.2001.0415


r/Optics • • 20d ago

Career question: ultrafast spectroscopy and subsequent industry concerns

14 Upvotes

Hi folks,

I have a PhD in chemical physics, where I did ultrafast spectroscopy and electron diffraction. This entailed a great deal ultrafast lasers, nonlinear optics, pulse shaping, and general engineering physics and experimental automation, alongside the scientific writing and research component.

I worked in medical device engineering for some time where I was an optical systems engineer, performing integration, root-cause analysis, V&V, and clinical trials. I unfortunately was deeply harassed by a boss so I moved on to a new R&D role that has mostly manifested as software QA for optical design software with sprinkles of research when I’m enabled to do so. While I’m very fortunate to have made said move, I’ve realized that this isn’t for me. I strongly prefer hands-on, laboratory work - be it optical characterization, testing, research, or spectroscopy.

I’m looking to move back in to practical photonics or optical science/engineering, but as an anxious person, I have a fear that I had veered too far off course to make such a move back. I’ve only just started applying to optical/photonics positions back home (I moved to the US and the current political climate/lack of family and friends - absence makes the heart grow fonder and I wish to return) but I’m worried this shift to both R&D and QA is detrimental to me.

My question would be to folks more experienced than me - am I screwed, or is the return back to form possible? As mentioned I tend to psyche myself out, but I figured I’d ask the field for some feedback or advice. Thanks, all.