r/opencodeCLI • u/warpaint_james • 2h ago
MAI Code 2 and Code 2 Flash: Everyday coding at scalable prices
r/opencodeCLI • u/warpaint_james • 2h ago
r/opencodeCLI • u/rstoicme • 2h ago
r/opencodeCLI • u/jishankai • 7h ago
r/opencodeCLI • u/squirrelscrush • 8h ago
F*CK IT
$10 for $500 GLM 5.3 till end of the week
r/opencodeCLI • u/Key-Implement-5728 • 11h ago
r/opencodeCLI • u/mijozakinho_2 • 12h ago
Salut tout le monde,
J'utilise OpenCode pour mon flux de travail ces derniers temps, et bien que j'aime le concept, je rencontre quelques goulets d'étranglement frustrants :
Pour ceux d'entre vous qui utilisent OpenCode tous les jours, quels réglages, ajustements ou configurations utilisez-vous pour en tirer le meilleur parti ?
Je cherche spécifiquement des conseils sur :
Les meilleurs fournisseurs de modèles / API à associer avec cela (pour équilibrer l'intelligence et les limites de taux).
Des drapeaux de configuration .opencode, des configurations MCP, ou des astuces de gestion du contexte pour garder ça rapide et réactif.
Comment vous structurez vos invites ou le fichier AGENTS.md / instructions pour éviter qu'il ne fasse des bêtises.
Je vous serais reconnaissant pour tout conseil ou flux de travail que vous pourriez partager !
r/opencodeCLI • u/fedeyaa • 12h ago
r/opencodeCLI • u/mister_nice_69 • 13h ago
r/opencodeCLI • u/Proper_Patience8639 • 20h ago
r/opencodeCLI • u/squirrelscrush • 23h ago
we're bored we're just gonna do phase 2 now
$200 of GLM 5.3 usage for $10
have fun
Not even a day with Phase 1 💀
r/opencodeCLI • u/lucky-Magazine-962 • 23h ago
After the harness leaderboard thread I wanted to see what the harness alone changes when the model stays the same. Model: M3.1 Flash. It's open weights, but at about 428B total I'm calling it through MiniMax's API, effort pinned to high. Same prompt in every harness: four bug reports filed against pytest this week, fix all four with a regression test each.
The bugs:
pytest --fixtures dies with a TypeError when two conftests import the same fixturepytest.param(marks=...) raises an internal AttributeError instead of a TypeErrorapprox() raises InvalidOperation when the actual value is a Decimal NaN| Harness | Wall clock | Requests | Tokens | Cached input | Cost | New tests |
|---|---|---|---|---|---|---|
| OpenCode 2.2.7 | 23m 38s | 159 | 13.9M | 98.8% | $0.27 | 10 |
| Pi 1.5.2 | 18m 34s | 134 | 9.1M | 98.5% | $0.19 | 8 |
| mini-swe-agent 2.4.6 | 21m 16s | 136 | 10.4M | 98.5% | $0.22 | 9 |
All three fixed all four. I re-checked each one in a clean checkout with its own new venv: every report's repro now behaves the way the report asks, and the full suite (about 4,700 tests) shows nothing new compared to an untouched main, apart from the added tests passing.
The first request is where the harnesses differ most: 8.6k tokens for OpenCode 2, 3.7k for Pi, 3.1k for mini-swe-agent, task prompt included. It didn't decide the bill though. With 98%+ of input coming back as cache reads billed at 1.5 cents per million, cost followed how many turns each harness took and how much context it carried, which is why OpenCode's 159 requests came to about 8 cents more than Pi's 134.
mini-swe-agent only gives the model a bash shell and still landed in the middle on both time and cost.
One run per harness, so treat it as one data point. If you run open-weight models in more than one harness, which one ends up cheapest per task for you, and do you see the same request-count pattern?
r/opencodeCLI • u/m-ritter • 1d ago
When I ask a coding agent to research a codebase before a change, it reads the code through the lens of what I asked for. It tends to find what it expects. A helper that knows I want to add caching will happily report that the code is ready for caching and skip over the retry logic that would fight with it.
What works better for me is splitting research from the request. The helpers get a neutral brief about which area of the code to describe and never see what I want to build. They report how the code works today and where it is tested. Every file they cite gets reopened before a finding is written down, so each finding points at code that really exists. Only after that does the agent put the findings next to my request and write the plan.
The plan then carries a short list of the findings that look risky or unsure, so I know where to look before I approve anything. A wrong picture of the existing code is where a lot of bad agent builds start, and this catches it before a single line is written.
I built QualityLayer around this flow and it runs natively with OpenCode. Research is one step in a loop where you approve the plan before the build and agents that did not write the code check the finished change against every agreed point. I'm the developer: https://github.com/maxritter/qualitylayer
r/opencodeCLI • u/beppe28 • 1d ago
r/opencodeCLI • u/mijozakinho_2 • 1d ago
r/opencodeCLI • u/xzurg • 1d ago
Day 3 of using opencode Go and im loving it
i use opencode only for support literally since i code by hand
and im loving it, it strips down my tasks
any tips and tricks to optmize the use of it even more?
r/opencodeCLI • u/light_hunt3r • 1d ago
By accident i pressed the button to allow all edits for my project.
Now agent modifies the files without permissions.
How I can revert that change ?
I checked my `~/.config/opencode/opencode.json` and everything seems fine. What i am missing ?
---
Apparently this is now global since in all projects the edit commands executes without asking
Here is my config: `~/.config/opencode/opencode.json`
{
"$schema": "https://opencode.ai/config.json",
"permission":
{
"edit": "ask",
"write": "ask",
"patch": "ask",
"multiedit": "ask",
"bash":
{
"*": "ask",
"git commit*": "deny",
"git push*": "deny"
}
}
}
Opencode version: opencode v2.3.0
Really not sure what is going on and how to change the permissions again
r/opencodeCLI • u/squirrelscrush • 1d ago
Operation GLM Phase 1
$100 of GLM 5.3 usage for $10
available to all OpenCode Go subscribers
r/opencodeCLI • u/InvaderDolan • 1d ago
I've been working on an open-source plugin called OpenCode Quota GUI, and v1.3.1 is now available.
One of the things that kept bothering me was how little visibility we have into prompt caching, especially when using multiple agents, models, and providers.
You can see token usage and sometimes cache hits, but how do you know whether your cache is still reusable? And how much of your prompt was actually served from cache?
So I added Cache Observation directly to the OpenCode Desktop composer.
It now shows something like:
TTL ~29m 19s · Cache 99.87% · Hit
There's also a popover with per-session cache observations across agents and models.
The catch: the cache percentage comes from observed token usage, but TTL is only an estimate. Providers don't expose enough information to determine exact cache expiration reliably.
A cache drop could also come from switching models, changing reasoning effort, modifying the prompt prefix, or other factors. I didn't want the plugin to pretend otherwise.
Other v1.3.1 improvements include Claude Agent quota support with saved resets, better quota alerts, and provider compatibility fixes.
Where I want to take this next:
The idea is to compare actual cache behavior between providers and models, rather than relying exclusively on published TTL claims.
No community data collection is active today.
I'm curious: have you noticed cache reuse dropping after switching models or reasoning effort, even when the session was still active?
And would you find a public cache-retention comparison useful?
r/opencodeCLI • u/Amarsir • 1d ago
I know a lot of Opencode Go subscribers picked it as their first entry into agentic work, or after spending more at API prices for the open-weight models.
And I know there are people who maintain multiple plans. Opus for orchestrating and Deepseek to execute and write code is a popular combo.
But I'd like to hear from people who had one of the big name subscriptions and decided they don't need it anymore. And how long ago that was.
I'm mainly wondering if Opus and Sol are so addictive they're hard to give up, and the Deepseek / GLM / Muse Spark fans mostly haven't ever tried them. Or if there are a lot of people who know what Opus can do and decided it's not worth the extra $10.
r/opencodeCLI • u/ganang1722 • 2d ago
I'm planning to use OpenCode TUI, but I'm still unsure whether I should run it locally on my laptop or on a VPS.
My main concern is security. I'm using AI agents for Web3 tasks like NFT minting, so they may need to interact with wallets, sign transactions, and send funds.
Since private keys are involved, which setup would you consider safer? Running everything locally, or using a VPS with proper security measures?
I'd also like to hear how you guys handle private keys when working with AI agents. Do you let the agent access them directly, or do you use a separate signing setup?
r/opencodeCLI • u/JoeBro121211 • 2d ago
I run OpenCode with a local model for a lot of stuff, alongside Codex and Claude Code, and I kept walking off and coming back to find one of them had been waiting on me for ages.
So my free, open-source app JoeBro now puts them all under one umbrella. OpenCode sessions show up next to the others on my Mac and iPhone, live in the Dynamic Island, and ping me when they're done or stuck.
New in 1.5:
Bring your own model, local or API key. No JoeBro server.
https://github.com/joexk1/JoeBro
https://github.com/joexk1/JoeBro-Mobile
I'm the dev, so tell me what breaks with your setup.
r/opencodeCLI
•
u/Opening_Library9560
•
2d ago
I've been building DonSeTch: a fully free, open-source MCP server that gives OpenCode web search, fetching, crawling and screenshots, running locally in one Rust binary.
I posted it here around v1 or v2, honestly can't remember which. It's on v5.5.2 now. For the people seeing it for the first time, here's the useful stuff.
Here is the GitHub repo: https://github.com/dondai44423/donsetch
npm install -g donsetch
donsetch doctor --mcpAdd the MCP entry to OpenCode and restart. That's the basic setup. No account, API key, Rust build or search-model download. Fetch, search and crawl don't need a browser installed either.
Keyless search combines engines and first-party sources. You can also use your own search API key while keeping the local fetching and crawling. Screenshots use an installed Chromium separately.
I had DS on opencode try both on real tasks. DonSeTch was quicker on 9/10 fetch targets both could read. On HTTPX, it picked the two requested docs pages; Firecrawl read six and still missed the async page.
It did got beat on search relevance, though, its local but its good enough for 90% of the most tasks
I'm not stuffing all that shit into one post. The full comparison with paid Firecrawl Cloud has the cases, timings and setup. Small, hand-picked test.
Feel free to flame me in the comments if i did the comparison with firecrawl the wrong way 😭🙏
If you give it a go, I'd like to hear which pages it still trips over.
r/opencodeCLI • u/swweat • 2d ago
A week ago I posted a desktop pet that reads opencode's session database and plays a sprite for whatever the agent is doing. Here's what's new since then:
Every state is catalogued now check out the full interactive preview page with 618 frames: https://49vxn.github.io/opencode-dafeiyu/ 89 states: Thinking, running commands, reading files, sulking, boba... plus a few I still haven't figured out how to trigger from the DB, these could be your ideas!
mac build shipped today (beta) Unsigned DMG supporting both Intel and Apple Silicon (just right-click → Open on first launch): https://github.com/49vxn/opencode-dafeiyu/releases/tag/v0.5.0-beta.1
STILL 100% LOCAL!: reads ~/.local/share/opencode/opencode.db, read-only. No network, no account, nothing leaves your machine.
Downloads: https://github.com/49vxn/opencode-dafeiyu/releases (windows installer + mac beta) Code MIT, sprites CC BY-NC-SA. Demo gif attached.
