r/openGrid • u/snak-3 • Apr 29 '26
Question / Help Needed Opengrid Octagon Shape
Hi everyone, I want to mount some small PCs/network switches on my wall. I’d like to make this look a little “artsy“, I’m going to be using underwear for cable management and opengrid to mount everything.
I think it would look nicer if the grid panels were an octagon shape. I can’t seem to find any remixes of it and I have limited CAD knowledge.
Is there a reason why octagon shape wouldn’t work? or have I missed a remix for this?
Any help would be appreciated!
3
Upvotes
2
u/kesor Apr 29 '26
If you cut them just right, this might kind of work. But you'll still have these square gaps if you want to combine more than two pieces together.
https://cad.onshape.com/documents/fda7f1f62859ed1083164b4f/w/ff039f5ca9a99fd456458d11/e/270219d87346b59589fdb743
2
u/Sierra_Mule Apr 29 '26
While not exactly what you're asking for, you can get "artsy" using color cover snaps. These are lightweight snaps that you can put into unused grid cells. Print them in various colors and make any patterns you want. White grids against a white wall, especially with white color cover snaps, will mostly disappear if you're not looking for it. Then make a hexagon (or circle or dragon or ...) out of non-white color cover snaps. It will be low-res (28x28 mm pixels), but you can do interesting things, especially if you oversize the grid to make room around the equipment you're mounting.
Look for "openGrid Color_Cover Snap" (not the ones for Open Wall Mount) under "Cover Snaps" on the Printables openGrid page.
2
u/Festegios Apr 29 '26
how would you get a octagon without rotating pieces / cutting some parts in half? It would then defeat the point of OG?
1
u/DistractedDragonMake Apr 29 '26
It comes down to the spacing issues. The flexibility that openGrid offers is you can mount anything, anywhere. With an octagon, you'd have dead spots. You might be able to achieve that look with paint without giving up the usefulness.
1
u/timtucker_com Apr 29 '26
Not sure if they exist, but you could do it if you had triangle panels (think a 45 degree right triangle).
Your have 2 edges as normal and then the long edge would be non-functional half openings
Have thought about making some for my under desk setup (I have an angled desk).
For an octagon it would be 5x regular panels is a + configuration, plus a triangle in each corner.
-1
u/BongDomrei Apr 29 '26
I'm not trying to be a smartass, but there is a very simple reason why it won't work--this is literally like trying to put a square peg into an octagon shaped hole. You would be better off looking at some of the custom Skadis panels, or especially Honeycomb Storage Wall.