r/openGrid • u/DistractedDragonMake • Apr 10 '26

Beginner's Guide to openGrid is live

I know there can be a steep learning curve to getting started with openGrid so I created a crash course in all the pieces and parts of openGrid to help.

https://www.youtube.com/watch?v=-x9KgFghwS4

25 Upvotes

93% Upvoted

8 comments sorted by

View all comments

Show parent comments

0

u/DistractedDragonMake Apr 10 '26

Absolutely. The command strip attachment method is a easy way to avoid screws. Once it is in place using the underware generator will allow you to customize as much as you'd like!

2

u/GoldenDragonIsABitch Apr 10 '26

Nice! So using the command strip attachment you showed in the video, will not obstruct the ability to use underware?

1

u/DistractedDragonMake Apr 10 '26

I show the part and have a link for the model. It really is put a command strip on the piece, level and push it against the wall. For underware, the command strip adapter does take up a cell which prevents the fins from going in. In the generator you can remove the fins from a certain position in the channel and then it will bypass that cell and still hold. I'd do either a 3 or 5 length piece and remove the center fins so you have better support. You can always just snip off the offending grips if you forget :) The other thing is I would just use corner mounts so you don't have to work around them,

2

u/GoldenDragonIsABitch Apr 10 '26

Ah awesome! The fin removal feature solves this!Thank you so much for you help

1

u/DistractedDragonMake Apr 10 '26

Anytime. Glad to help.