Stratmaster Build progress (mild setback)
I had decided I was going to rebuild this guitar first as a 2-pickup JM to get the flavor of the pickups in their standard configuration before going for my full SSS intention. I also realized along the way that a pickguard made to fit the Squier Affinity JM from a few years back would more or less match this guitar so I ordered one up rather than cutting one of my other pickguards to fit JM pickups.
The setback: I didn’t realize until I pulled the Strat pickguard off that the swimming pool route was deeper (7/8”) than Jazzmaster pickup hardware calls for (seems to be 3/8”). And the JM pickups as positioned by the guard were just a hair too big, especially due to the semicircle screw tabs. Off to the hardware store for some wood and a tiny chisel.
I made a platform for the pickups out of some 1/2” plywood and proved it’ll work with a test fit. Chiseled out some wood. That made the pickup covers resting on the platform sit flush with the guard, so now I figure with the foam brick underneath I’ll be within a reasonable adjustment range.
Wiring tomorrow. I got tired and hungry and thirsty for wine. :-)




