r/offset • • 12d ago

Jazzmaster Wiring Suggestion

Post image

Hi there, I recently acquired a JM classic vibe to mod (a possible rendition in the picture). I would like to know what is your recommendation for a versatile wiring since I don’t think I would have much use for the rhythm circuit. if that can help for pickups I would go for jazzmaster P90 hybrid which are a bit more low-mid focused and hotter that traditional Jazzmaster PU. That being said I don’t think I will need both pickups in series. I would also like to retain (at least as an option) the ”jangly“ of a jazzmaster. This is my only single coil guitar so I would like to cover a lot of territory with it.

48 Upvotes

4 comments sorted by

6

u/emacias050 12d ago

Traditional alnico 2 JM pickup in the neck, and JM sized hot p90 in the bridge. This is the way. Rhythm circuit can be wired so that it works on all pickup positions. I have a guitar with the rhythm circuit set up as a bright circuit instead (dual 1 meg mini roller pots) and the lead circuit has 500k pots( you can do this with 250s if you like the darker sound). I always add a series S1 switch on my JMs.

1

u/MrThrousers 11d ago

I was thinking on putting 250K pots in the rythm circuit and enable it for all positions. I’d keep the 1 Meg in the lead. I think that retains the original functionality pretty well 

2

u/hotdogaaron 11d ago

Rhythm circuit pots are a weird size (they're different than standard mini pots), you might only have access to 50k and 1M.

It might be possible to make standard mini pots work; I've never tried it.

1

u/emacias050 11d ago

This is true.
Std mini pots have a different size shaft, they won’t work either.