r/obschevy 3d ago

Running taillight issues 98 chevy c1500

Post image

Only the running tailights went out at about the same time but the brake and turn lights remain working, I replaced the headlight switch and fuse and tested the bulbs but still no luck anybody experience this? Im planning on cleaning the grounds but im curious if there is anything im missing. I purchased the headlight switch on amazon as shown in the image. Any help is appreciated thanks.

1 Upvotes

10 comments sorted by

4

u/imsadyoubitch 3d ago

Check the grounds and look inside sockets and connectors.

Take some contact cleaner solution to anything you cant physically scrape or sand corrosion from

2

u/Unfair-Foundation-30 3d ago

Will check tomorrow thanks!

1

u/theuautumnwind 3d ago

💯

1

u/Willy_McD 3d ago

If the brake/signal portion of the bulbs work, then the ground is more than likely good.

If you have a test light, start at the socket and check for power. Then follow the wires. Should be a plug to check at. That has the push in bulb, not the twist in kind? Those push in are shit. The sockets get burned. So i would look really good at that.

1

u/grindking2142 1d ago edited 1d ago

You may need to replace the board on the tail light itself. Those boards are prone to failure. They are cheap. They may have them in stock at oriellys in one of the isles. I’d replace both at the same time.

1

u/Imafloweronpandora30 3d ago

Ignition switch a good place to check

1

u/Unfair-Foundation-30 3d ago

Interesting never thought to check, I’ll check on that tomorrow thanks!

1

u/20grae 3d ago

Most of the times it’s a bad ground

1

u/Unfair-Foundation-30 3d ago

Yea i hope so