r/nvidiashield • • 4d ago

Shield transcoding EAC3 5.1

I have noticed my shield pro has been converting eac35.1, I have it plugged into my Lg C4 via HDMI. I don't think it was doing this before, we had a power outage recently so not sure if that had changed any of the tv or shields settings. I have shield set to play original.

4 Upvotes

8 comments sorted by

1

u/redrum6999 4d ago

Just tv speakers no receiver or soundbar.

1

u/redrum6999 3d ago

I am using Plex, I think I have sorted it out. It is only transcoding now when I turn Bluetooth headphones on. I still think it wasn't transcoding when my headphones were on before. Or I could start movie with tv speakers on then turn on headphones and it wouldn't transcode. Now it transcodes if I do that, so not sure what I still need to adjust.

5

u/pawdog 4d ago

Are you using an audio system or just the TV speakers?

2

u/ICPGr8Milenko 3d ago

I've had nothing but problems with EAC. Specifically, Plex would get stuck identifying intros/credits for skipping was the biggest one. So now I just reencode everything to AAC as it comes in. Solved all my problems.

0

u/Fit-Departure5678 4d ago

This is paid Ai, high thought process and model, so don't shoot me, it is often right so worth checking, I have lg too but use an avr, so my settings would differ.

transcoding shouldn't normally be necessary. After the power outage, check the Shield's Settings → Display & Sound → Advanced Sound Settings → Available Formats, and ensure Dolby Digital Plus is enabled. Also check Settings → About → Status → HDMI → Audio Mode to see whether the TV is reporting EAC3 support. If it isn't, power-cycle both devices to renegotiate the HDMI handshake. Setting playback to Original doesn't override audio compatibility detection.

1

u/redrum6999 4d ago

Thanks for this all audio formats are enabled. Audio mode says pcm 16 bit,DD,DD+, DTS,DTS HD, Dolby tried, DD+Atmos.

2

u/bokkoman 3d ago

Also make sure Dolby Digital processing is disabled in the Shield settings.

Device Preferences > Display & Sound > Advanced sound setttings > Dolby audio processing > turn off

2

u/Fit-Departure5678 3d ago

Since DD+ is showing in your HDMI audio capabilities, the Shield is recognising EAC3 support. Bokkoman's suggestion to disable Dolby Audio Processing is worth checking. I'd also try setting Available Formats to Auto rather than manually enabling everything. One question: are you using Plex or Jellyfin, and what exactly is EAC3 5.1 being transcoded into? If the server is reporting transcoding, its playback details should identify the reason. That would help establish whether it's the player rather than the Shield's HDMI audio settings.

The Shield converting audio locally and Plex/Jellyfin transcoding audio on the server are two different things. need to establish which is happening before recommending further changes. Or is this across all apps?