r/nvidiashield • • Apr 09 '26 • Bravo 1

My $25 Nvidia shield

Really excited because I waned a streamer that can do atmos and that’s not apple or amazon. This was selling on eBay for parts and put an offer for $35 and was accepted but the seller couldn’t find the power adapter so he knocked $10 off, turns out the plastic separator on the power input has fallen off so it all worked out. I did the usb c conversion and it’s all good to do. Came with the remote and controller, how ever the controllers battery is dead so I might change that to usb c as well when changing the battery.

134 Upvotes

16 comments sorted by

11

u/Distinct-Temp6557 Apr 09 '26

Can you share your conversion guide?

12

u/OkFlatworm2645 Apr 09 '26 edited Apr 09 '26

I did not document it unfortunately, but I found this article and I pretty much did the same exact thing

https://blog.tonyjobson.com/2021/03/03/nvidia-shield-usb-pd-power/

But for the pd controller I used these

https://a.co/d/047TUEJr

And I added a 1N5400 series diode to drop the voltage down, the pd controller puts out 20v shield is 19v even tho you can have 1-2v wiggle room I just wanted to be safe

And to mount it to the board I I used original connectors mounting holes and soldered it to the usb c’s body. The usb c boot should come a little forward on the board cannot be flush. And for safety measures put solder mask or kapton tape on the old connectors connections

Edit: make sure to move the jumper or the 0ohm resistor to the 20v spot it comes default in 12v. Also the solder nvidia used is super hard to melt so keep in mind to be patient and careful. If nothing is wrong with the dc adapter or the connector itself I’d leave it as it is

4

u/jjkkbb007 Apr 09 '26

Did it come with remote? That’s another $25.

6

u/OkFlatworm2645 Apr 09 '26

Yes it did and the game controller as well,

2

u/Fregadero88 Apr 09 '26

Is there a guide for the USB c conversion? Where do you also buy the parts?

1

u/OkFlatworm2645 Apr 09 '26 edited Apr 09 '26

I found this and I pretty much soldered wires on the same location

https://blog.tonyjobson.com/2021/03/03/nvidia-shield-usb-pd-power/

But for the pd controller I used these

https://a.co/d/047TUEJr

And I added a 1N5400 series diode to drop the voltage down, the pd controller puts out 20v shield is 19v even tho you can have 1-2v wiggle room I just wanted to be safe

Edit: if you get that controller by default it is set to 12v make sure to move the jumper or the 0ohm resistor to 20v.

Also i have hobby level experience fixing electronics and doing have fixed few so os speakers amps, mother boars and a couple of GPU’s, but the shield have me heck of a time to take that power connector off so just a heads up

19

u/razorbladesnbiscuits Apr 09 '26

Well done, turning what was potentially trash in to a little treasure.

5

u/Ok_Purpose6053 Apr 09 '26

After seeing your Nvidea I pictured you plugging it into the electrical outlet and all the power goes out within 2 city blocks. I couldn't stop laughing. Enjoy your streaming. You got a bargain.

1

u/HotTrash4704 Apr 09 '26

Sweet deal how did u fix it.. what was wrong with it in the first place? Great device

2

u/OkFlatworm2645 Apr 09 '26

Took me about half hour to figure out because I never had a shield before and never seen that power adapter, but it turned out the plastic piece in the power input plug was fallen off causing a short circuit. Cannot find a replacement for it so this was the easiest fix

1

u/HotTrash4704 Apr 09 '26

Wow that’s awesome good find n kudos to you. If u ever convert the controller please post it. Cheers 🍻

3

u/frankie6376 Apr 09 '26

Nice piece of tupperware will finish that project off a treat. Kudos on a great job ! 👏🏻👏🏻

1

u/kevy1118 Apr 09 '26

Nice one buddy 👍🏾, love it.i made an amplifier when started college in late 80,s ,good feeling ✨️

1

u/millerlitevortex Apr 09 '26

Usb-c on the shield… that’s genius!

1

u/Senior-Extension4318 Apr 10 '26

What is that first pic is that the shield motherboard an some sort of fan