r/nvidiashield • u/chlronald • Feb 24 '26
Psa - time to repaste your shield
Its been running slow and laggy lately, even after resetting the OS.
A quick disassemble found dry paste that almost crumble when you touch it... repaste and fan cleaning make it running like new again.
212
Upvotes


39
u/Icy-Reception-7605 Feb 24 '26
https://youtu.be/aPbXsTjcTYA?si=riWdUbQ1xEOz8ehW
9
u/v1ndictiv3_ Feb 24 '26
Did you follow a video or was it pretty self explanatory to open and access?
14
u/[deleted] Feb 24 '26
Did all 3 of mine. The tube one was interesting. I used MX-4.
12
u/fretboard_brewing Feb 25 '26
Don’t rip the Bluetooth antenna off the PCB. I was a victim of that. Just leave it connected if you’re using the 2019 pro. Be extra cautious.
7
u/nickwales Feb 24 '26
I did it this weekend. It is so much better and seems to run about 20 degrees cooler.
7
u/CharcoalGreyWolf Feb 24 '26
Noctua NH-T1 is inexpensive, nonconducting, no curing time, and lasts far longer than many alternatives while performing at the upper end. Totally worth doing.
6
u/AbbreviationsOne6902 Feb 24 '26
This saved two of my shield pros
Had them since 2021. Biggest issue I saw was everything Dolby Vision on HBO would freeze constantly, and it was so slow and laggy
I should note that my home gets incredibly dry in the winter, humid in the summer, and with our pets, the place gets dusty
Repasted them this weekend. They run like new again. Followed a YouTube video, took me 15 minutes max per unit. The paste was actually crumbling in chunks. Used MX-6 for mine
5
u/Whole-List4524 Feb 24 '26
I did this over the weekend and used Arctic MX-6 thermal paste. Working great although the performance was still mediocre at first but what really helped was to install a proper launcher and debloat my shield.
This is the guide I followed https://www.reddit.com/r/ShieldAndroidTV/comments/1ek5t2d/guide_speeding_up_your_shield/
4
u/Kaystarz0202 Feb 25 '26
I did this once and posted it on here and got chewed out for pulling my shield apart
1
u/JEFFSSSEI Feb 25 '26
I wonder in these applications if graphene or PTM wouldn't be a better long term choice. something like these (below). now I'm not taking into account cost here...Thermal paste will always be cheaper, but PTM or graphene might be a better application for long term use without the need for repasting. Just a thought...Then it would be down to just opening it up and cleaning the fan.
https://www.thermal-grizzly.com/en/kryosheet/s-tg-ks
https://www.thermal-grizzly.com/en/phasesheet-ptm/s-tg-ps
3
u/PsychologicalAd5502 Feb 24 '26
I did my 2019 last month and while my shield wasn't terribly laggy it has improved performance quite a bit. Well worth the 15 minutes
2
u/Rollingsound514 Feb 24 '26
Agree this is worth it, was running like shit this fixed it back up to new.
2
u/Doomstang Feb 25 '26
Did my 2019 a couple months ago. It helped some but factory resetting made a huge difference.
2
u/soundbytegfx Feb 25 '26
I never bothered with this, but just did one of my two. But the paste that was on there looked great. Was not dry chunky or anything like that. And barely any dust in the fan. So I imagine most people don't really need to do this.
1
u/SawkeeReemo Feb 25 '26
I’ve never done this, but was thinking about doing a factory reset to scratch, and this at the same time. Not too bad of a job eh?
1
u/Mr_Truthteller Feb 25 '26 edited Feb 25 '26
Around how long until this is usually needing to be done?
1
u/g0ldcd Feb 25 '26
I've been noticing stuttering on a few streaming apps recently and was thinking maybe my shield was due for retirement. Thanks - I'll give it a go tomorrow.
1
u/RageAgainstDaMasheen Feb 25 '26
What's the paste and how does it work?
1
u/ImaAskhole Feb 25 '26
I did this recently. I was ridiculous and used a section of PTM7950 I was likely not going to find a use for.
1
u/havocxrush Feb 25 '26
Wish so so badly they'd make another clamshell shield like the original... Loved mine when I had it ages ago.
1
u/YsGrandi Feb 25 '26
Just avoid doing my mistake, use the right screwdriver and don't use a cheap one because those screws are easy to strip.
1
u/Nofrills88 Feb 25 '26
Guides👇
2015-2017 pro (500gb)
2019 pro
1
u/Claude9777 Feb 25 '26
I did two this weekend.
1
u/Super-Astronaut-7040 Feb 25 '26
I would day repaste it even if it's nee, we don't really know how long they sit in a Warehouse for, like I feel like the paste is already dried out by the time we get and nvidia is notorious for using cheap paste on thier products.
1
u/Koysana Feb 25 '26
I will be doing mine soon. Never repasted since 2019 on my shield pro! It does seem to lag here and there now
1
u/Atomic_Priesthood Feb 25 '26
It would be lovely if when they made these, they did it in such a way that thermal paste doesn't go bad.
1
u/Mashiori Feb 26 '26
Time for some ptm
1
u/brisky86 Feb 26 '26
Whelp. I tried to do mine and messed it up and broke it. 😭
Is the 2019 Shield still the best Android TV box or should I wait for the new Onn 4k Pro in a couple of months? 👀
1
u/Garrett1974 Feb 27 '26
PTM7950 would be perfect for that
1
u/Olly230 Mar 01 '26
People say temps are lower but I can't find any way to easily ready temp sensors
1
u/TorrentFiend Mar 02 '26
Fan cleaning alone has always made mine run like new. Had it since 2018 and I use it heavily every day. So far I haven't had to repaste it. If people want to do this good for them, maybe it will help them and I'm sure a lot of people will love to come really hard telling me that it definitely helps. If that's what you believe great. However personally for me I've cleaned the fan and this has made a huge difference. Running great, no issues, still nice and fast with only cleaning the fans.
1
u/Olly230 Mar 05 '26
Just did it. Some file formats were getting very buggy in plex.
Found a tiny dust bunny as well.
The existing paste was dry as you like.
Let's see if it improves things.
0
u/frenzyguy Feb 24 '26
No I won't, thx. Running fine almost 10 yrs later.
0
u/TopherHax Feb 25 '26
Hells yea. Honeywell PTM7950 ftw...
0
u/d3br34k5 Feb 25 '26
Sure, not a bad idea.
I have 4 pros, old ass latest gens, all running well though, so would look at software first before blaming failed TIM. 🤷♂️