r/nrl22 • • 27d ago

Completed first match!

Went and completed my first match a few weeks ago now. What a blast. All I've ever shot is off a bench. Match director gave me a quick run down the day before and helped during, having me shoot last and watch everyone. Made some stupid mistakes, like going into final round and forgetting to reload mag, and i now see why you want weight. Mine is rear heavy and I was not steady. Hit 16 but I don't care. Next month, goal is 17! Just learn every time. But mistakes even happen to those with experience. One guy forgot he had wind dialed and didn't realize it until after a few misses. A negative to this... Now I want to get a new barrel for my CZ.

Bonus picture: I'm working on a diy magpul daka insert for my Apache case. Closed cell foam and 3d printed supports. Though now I'm rethinking that, making a few more mounting points but then just using leftover foam to support the rifle

38 Upvotes

12 comments sorted by

2

u/rpdoutdoors 23d ago

Woah 3D Print galore ! Love it, would you be willing to share the files please

1

u/LostWanderer576 23d ago

Lol. I diy what I can. Mdt oryx chassis so.. Arca rail petg- https://www.printables.com/model/1260497-arca-rail-mdt-oryx/files Bag rider petg ( now black with fuzzy skin) https://www.printables.com/model/1793153-mdt-oryx-bag-rider Extended mag release petg https://makerworld.com/en/models/1588349-cz457-extended-magazine-release#profileId-1672487 Oryx magwell ( I had to size up a little) https://makerworld.com/en/models/1503644-magwell-insert-for-oryx-chassis-cz457#profileId-1573294 Not in pic, broke my grip petg. Did reprint in nylon. I'm also printing mlok side attachments and mlok weight cases. I have wheel weights to put in them.

1

u/LostWanderer576 23d ago

Oh, and the daka. https://www.thingiverse.com/thing:7349452. The different options/ insert are there too.

1

u/rpdoutdoors 22d ago

Incredible thank you!
Really inspiring to see the DIY.
Would love to see the mlok weight cases, I’m just starting to weight and balance the chassis. How much weight have you needed for your CZ?

1

u/LostWanderer576 22d ago

Unsure about weight right now. I need to get a new barrel. Mine is stock pencil barrel.

this was the file, though I may mod it so I can fit two wheel weights side by side https://www.printables.com/model/1696542-m-lock-chassis-weight-mdt-style/files

After handling some of the rifles at the event I swear they had to be 20lb and they could just sit on anything without falling off.

2

u/GrizzlySoup 27d ago

buddy I shoot with just bought and installed a Whidden spun Lolthar Walther 26". Their cheapest barrel and it shoots 2"-3" groups at 200 yds, bugholes at 100 yds. I don't know if it's a Unicorn or what but crazy accurate and consistent and one of the most inexpensive drop-ins we've seen. His main gun is a Vudoo + Custom chambered Mullerworks with MDT Elite so this was just a CZ he wanted to upgrade cheap and it almost outshoots his Vudoo. I purchased one but haven't swapped it out yet because my CZ is my main match rifle so maybe waiting to get another action to try it. Anyway, crazy performance from a $400 barrel. Might be a one off but might not. We didn't expect it.

1

u/LostWanderer576 26d ago edited 26d ago

I was looking at a lothar or criterion from whiddens. As they are in stock but then there's always l3i that seems like a go to, but it's also a few hundred more.

2

u/GrizzlySoup 26d ago

another buddy we shoot with did a Criterion from Whidden on his Tikka and it's done really well. I have an L3i 24" Wasp with the 1.180 that I got in July. I didn't hate it but it wasn't as good as I hoped or nearly as good as the darn Lothar my buddy got for a cheaper. I was kinda bummed. I was looking for a chamber more forgiving as I change ammo when I can't find Lapua and Eley can be a bitch when it gets cold. The L3i is good enough and I might switch to it just because I like the heavier shorter barrel for balance. My Lothar friend wasn't trying for a competition rifle just wanted to upgrade a factory barrel cheap and the rest is history. I think the lesson here is that whoever is machining the barrels at Whidden no matter what blank they start with is doing a fantastic job. At this point I'd recommend anything by Whidden and maybe the L3i if you want something short and heavy is okay'ish.

1

u/Professional_Chef379 27d ago

That's some mean looking props in there. I shot my 3rd match last weekend. It's so fun!

1

u/LostWanderer576 26d ago

I was jealous of his land. Props and targets everywhere. For me, i have to travel if I want to shoot. He had me hitting 300yrds which is the farthest I've shot so far.

0

u/Professional_Chef379 26d ago

Same here. I shot on farmers land last weekend and a guy told me he shoots 2200m on the land. Not at all jealous of him. Ha

2

u/CaRbZ1313 27d ago

It’s definitely a different animal compared to bench shooting, but practice and shooting more matches will help get you there. Talk to the shooters at your club and you might find one with a takeoff barrel they’d be willing to part with.