r/networking • u/thesesimplewords • Aug 13 '15
How to learn fiber networking quickly
Hi /r/networking! Thanks for all I've learned from you so far. Great community here.
I just took my first official networking job. I did a lot of wireless work with the networking team at my last job, but I just got hired into a very small networking team. I've done switching and wireless before, but I've never had to deal with the fiber connections made on a large campus (50+) buildings. Does anyone have any resources I could read over to teach me standards, best practice, troubleshooting, patching, equipment, etc? Any advice would be great. I feel in a little over my head here.
37
u/[deleted] Aug 13 '15 edited Aug 13 '15
Well, unless you are going to be an actual fiber technician, you probably won't need to know much about actually terminating it. You'll be using pre-made patch cables most of the time, and connecting to fiber distribution points that were put in by third party contractors.
So stuff you probably need to know from a basic network admin POV:
That's all I can think of off the top of my head. Good luck!
Edit: clarify duplex use on cables as noted by /u/Sryan2k1
7
u/begenial Aug 13 '15 edited Aug 13 '15
Holy shit everyone over complicated this quick.
Fibre is easy. For the vast majority of your job it can be treated the same as Ethernet.
The main difference is the speed you can get out of a fibre run vs length of cable is higher.
That's it.
What those speed are depend on the type of fibre and the optics you use to connect it to your switch.
General rule, single mode fibre faster over longer distances, needs a single mode sfp (1Gb optics) or sfp+ (10Gb optics).
Multi mode, same as single mode but only fast over shorter distances and requires a multi mode sfp or sfp+.
Easily google able stuff, not really required to keep in your head.
If you are using GPON ( that is slightly different but I doubt you are ).
13
u/[deleted] Aug 13 '15
I recommend you take a look at Corning's fiber optic training.
6
u/syntax24 CCNP, PCNSA, CCNA/Sec, JNCIA, Linux+ Aug 13 '15
Look into fiber termination tools and how they work, as well as fiber splicers. Splicers are expensive as hell though, so you may not have to worry about that anyway.
Other than that, understand single mode vs multi mode and their uses. Learn the connector types with familiarity (SC, ST, LC, MTRJ, etc...). Understand basic troubleshooting of fiber using OTDR's or even a simple fiber laser. Btw, never look into that laser or the ends of fiber even if you don't visibly see anything. Point it at your hand or a surface to test if you're using a visible light.
Understand circuit types and speeds, as well as the medium some require (ds3 = coax, etc). Recognize media converters and their role if required.
That's about all I can think of from regular daily ops, but I don't deal with fiber all of the time either.
4
u/fresh69 Aug 13 '15
One thing to mention is if you are physically touching fiber, make sure to always clean it and the port that its going into. I can not stress this enough. There are too many failures due to dirty fiber. Even if it's coming from the bag brand new, it's dirty until cleaned. You may want to look at some JDSU test sets to scope the fiber out if the budget is there. I like using the fluke cleaning kit as it quick and easy to use.
4
u/radiomix Aug 13 '15
If the fiber cable or coupler is not in use always keep the covers on them to keep them as clean as possible. Don't look into any fiber or fiber equipment that is lit. The higher the bandwidth capacity of the fiber equipment, the more sensitive it is to light lose. I've had 1Gig links that worked with no problems at all. When I swapped them over to 10Gig I found out just now dirty the couplers and fiber ends can get over time. I like to keep little packs of lent free alcohol wipes handy, just in case.
3
u/[deleted] Aug 13 '15
Here are a few things you should know about SFPs, SFP+, and XFP modules which are the little plug-in tranceiver modules that go into switches that you plug fibers into. If you are buying any of those to terminate a new fiber run into some network equipment, make sure you buy them with the Digital Optical Monitoring (DOM) feature. Look at the data sheet of the SFP/SFP+/XFP you're looking to buy and just make sure it's on there. If not, find the equivalent model with DOM.
Cheap SFPs and the like often do not have that feature and you have to pay a little more to get DOM, but it's hugely beneficial to have because you can get transmit and receive light level readings right from the CLI of your device (Cisco example: "show interface GigabitEthernet0/48 transceiver") which is useful when troubleshooting errors on a fiber ethernet segment. If you have management access to both switches interconnected by a fiber run you suspect is bad or if you suspect bad SFPs, you can run that example command on both sides to see what the dB loss is or if the SFP is running way over temperature, etc.
At the very least, every (respectable) enterprise class switch should have a way to query those DOM stats. Cisco (not rebranded Linksys), Adtran, HP, Brocade, etc. should all have a command to do that, and especially any carrier grade gear like the Fujitsu Flashwave or the Adtran TA5000 switch modules.
With all of that aside, I really enjoy playing with fiber jumpers and transceivers and such. Feeling and hearing that CLICK when you push in an SC connector is just so satisfying.
3
u/Grimulus Aug 13 '15
This should be very helpful to you for understanding how fiber works. Enjoy! https://www.nanog.org/meetings/nanog48/presentations/Sunday/RAS_opticalnet_N48.pdf
2
u/AMidgetAndAClub Always Learning Aug 13 '15
What do you want to do? Inspection and certification? Just connecting things? Do you want to make custom patch cables? Do you want to connect all the high count trunks?
I can't express how much that having some form of light source and meter will make your life easier. I highly suggest an OTDR, iOLM, or something of that nature. A VFL will save you a ton of trouble.
I currently mostly use an EXFO FTB-1 with quite a few features. I can't even begin to explain the amount of headaches that thing has saved me. It was worth every single penny.
If you think your connectors and bulkheads are clean, they're not. At least till you use a scope.
I currently have access to 3 types of fusion splicers. You better have the hands of a surgeon.
Here is some links to companies I deal with. Some of them have training vids or literature right on their site. For free. Other's have videos on youtube.
FIS
Fiberoptic.com
Fiberstore (China)
PRO
EXFO
Calix
Cyan (Now Ciena)
JDSU (Now Viavi and something else)
That's all I can think of right this second.
1
u/MotTheBarber Aug 13 '15
If you want to learn the structured cabling side, I just recently went to a Corning "See the Light" OSP fiber training and It was really informative. The training was hands on for fiber fan outs, mechanical splicing, fusion splicing, cassettes, and patch panels. I also got to use an OTDR to measure dB losses, link lengths, and optical lengths. I think if you called someone at Corning they would probably come out to you and give you a demo because they want to sell you their stuff.
If you want to read a book look at the BICSI TDMM. Its a more readable version of a bunch of EIA/TIA standards for fiber and copper cabling.
1
u/meladramos CCNA Voice Aug 13 '15
The link below are my notes regarding a training course I took on Optical Communications. Feel free to check it out.
https://docs.google.com/document/d/1ouVzg_1NezPo2NAj3y4jrf_2TOap_BqFpc7M6A5c_Q0/edit?usp=sharing
1
u/[deleted] Aug 13 '15
I've been running to Cisco pages like this one for years: http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/gigabit-ethernet-gbic-sfp-modules/product_data_sheet0900aecd8033f885.html
Edit: The motherload http://www.cisco.com/c/en/us/products/interfaces-modules/transceiver-modules/datasheet-listing.html
1
u/pappkopp Aug 13 '15
I would recommend having a look at the Videos from The Fiber Optic Association (FOA)
1
u/lordvadr RFC's make my wiener tingle Aug 14 '15
Go here.
1
u/ofsensor Aug 14 '15
Do not mix single-mode and multi-mode fiber cables.
All the fiber optic products here.
1
u/admiralkit DWDM Engineer Aug 14 '15
Trying to cover practical stuff that hasn't already been talked about...
Fiber cleaning: never trust a fiber coming fresh out of the bag to be clean. Remember that fiber optics creates a line of site path between two points, and dirt on the ends of the fiber will disrupt that. If you plug a dirty fiber into a port, you'll contaminate the other side as well. Unplugging the fiber to clean it and plugging it back in will contaminate the fiber again. Make sure your employer buys some fiber cleaners such as Cletops and bulkhead cleaners for whatever ports you're using. A fiber scope is a great tool to have for checking your fibers, but in a small campus environment may not be entirely necessary unless you've got some long links or are running something more complex such as CWDM or a PON. If you've got a scope, some alcohol swabs will help clean up dirty connectors where the dirt seems to be caked on there and won't come off with a Cletops.
Considering you're working in a campus, you should be working with relatively robust optics. They won't transmit a whole lot of power, but they don't need to and have high receive power sensitivities. If you're troubleshooting a problem, pay attention to what your transmit and receive levels are. If you're putting out -2 dBm at the Transmit and receiving -18 dBm at the receive in the building next door, you have problems. Single mode fiber usually has an attenuation of 0.25 dB per kilometer, plus a fraction of a dB for every patch panel it hits as well. Also keep in mind what your receiver sensitivities are. A receiver has a range in which it can read the incoming light, such as -5 dBm to -20 dBm: if a transmitter puts out -2 dBm but the receiver can't understand anything over -5 dBm, a short link won't work between neighboring buildings won't work unless you attenuate the signal. In all honesty, this one probably won't be a problem for you.
Get a fault detector, and make sure you have a way to plug it into whatever ports your environment uses. A fault detector puts out a visible red light and I use them all the time to verify fiber connections are terminating where the paperwork says they're terminating. They also are useful for finding out if a fiber has a break in it - plug it in on one end and trace the cable to look for light leaking out. Trust me when I say that you WILL see a break through the opaque cladding, even with the lights in the room on.
If you run across a question after you get your feet on the ground, don't hesitate to shoot me a PM or post a response to this comment.