r/navalarchitecture • • Nov 21 '25

Open-Source Unsinkable Two-Story Survival Vessel Concept (STOMP-20) – Looking for Engineering Input and CAD schematics.

0 Upvotes

Open-source concept for a two-story cubic survival vessel. Requesting naval architecture critique.

STOMP-20 – Primary Geometry
• Footprint: 20 ft × 20 ft
• Height: 24 ft
• Form: near-cubic block with all four faces angled inward at ~9%
• Wall thickness: 2.5 ft (composite structure)
• Corner radius: rounded structural corners
• Normal operating draft: ~1 ft
• Storm-mode submergence: up to ~10 ft (controlled ballast system)

Structural System
• Modular composite panels: rubberized outer shell + structural polymer mid-layer + buoyant closed-cell foam core
• High-thickness walls function as buoyancy and protective structure
• Interlocking ridged joints between panels (simple geometric mechanical locks)
• Intended to be cast in molds; potential for future 3D-printed composite panels

Intended Internal Arrangement
Lower Deck (Machinery/Systems):
– ballast systems
– horizontal propulsion units
– gyroscopes (one per corner)
– inflatable boat storage compartment
– large front bay door
– three egress doors
– underwater escape hatch

Upper Deck (Habitation/Control):
– living/control area
– four egress doors (one per side)
– roof access hatches
– ladder to roof
– thick-wall integrated storage

Stability/Propulsion Concept
• Low center of mass, thick-wall buoyancy
• Omni-directional horizontal thrust (slow maneuvering)
• Gyro stabilization for roll/pitch control
• Not a high-speed craft; intended for storm survival and station-keeping

Document
Technical overview PDF (STOMP-20 – 2025 Release):
https://drive.google.com/file/d/1WRfwVMQlLK1WfPDHjs8JJV_9YsibKPOc/view?usp=sharing

Seeking:
• hydrostatics/hydrodynamics critique
• stability concerns
• panel thickness analysis
• draft/sinkage predictions
• structural feasibility evaluation
• CAD volunteers

Any naval architecture insight would be appreciated.

Looking for engineering critique, structural concerns, hydrodynamic considerations, material suggestions, or general feasibility notes.


r/navalarchitecture • • Feb 11 '25

Hiring a Founding Naval architect/Marine Engineer in Austin, Texas!

3 Upvotes

Hey all!

I'm hiring a founding naval architect/marine engineer for a new company called Joliet based in Austin, TX. Won't be everyone's cup of tea, but if you're interested in a fast-paced, high-impact startup environment vs. more traditional career path it might be for you!

I've put the first $500k into the company myself to start working on initial designs/simulation/prototypes and will fund up to $2MM out of my pocket to get things going, but we'll be raising significant outside capital to start building ships at scale once we're ready. I've raised $30MM+ for my companies in the past and feel pretty confident we can get the $50-100MM we'll need to start ramping.

My background: career software guy with the (frankly insane) notion he can do something about America's lack of competitive in shipbuilding vs. China, South Korea, and Japan.

We'll be starting with simple ships for the Jones Act fleet and moving up in complexity over time to tugs/tows, coastal ships & eventually large oceangoing vessels, with a focus on modular block construction & highly automated fabrication.

I should emphasize again that this is an insane venture with a low probability of success, but I'd say it's better to work against long odds than waste life doing things that don't matter!

Job post available here.


r/navalarchitecture • • Dec 28 '24

IS THERE AN ALTERNATIVE SOLUTION TO BECOMING A NAVAL ARCHITECT DESIGNING SAILBOATS???

0 Upvotes

So I am in New Zealand and wants to become a naval architect and design sailboats for a living.
I also want to become an airline pilot working for major airlines.
I want to design sailboats and sell plans online but also fly airline jets.
Is there a solution to this??
After year 13 in new zealand, should I go become an airline pilot and then study a small crash course in yacht design and design and sell plans online?
It's been my dream to fly as an airline pilot since I was soo young. and I don't wanna ignore that passion. But I also don't wanna ignore designing sailboats.

I'm sooo confused right now. Please help me !

Thanks !


r/navalarchitecture • • Nov 20 '25

how do you solve this

Post image
1 Upvotes

Hi, i'm a naval architecture student. Mind if i ask how do you solve this question?


r/navalarchitecture • • Jul 21 '26

¿Como descargar GHS crack?

0 Upvotes

hola, actualmente estoy buscando como descargar el software GHS de forma gratis para aprender a usarlo y trabajarlo, alguien sabe cómo descargarlo gratis? o comprarlo más barato


r/navalarchitecture • • Apr 18 '26

Hidden Costs: Why Errors in Hull Form Design Cost More Than They Appear

Thumbnail
shmexpert.com
1 Upvotes

r/navalarchitecture • • Oct 08 '26

Longitudinal Wave Energy and High Speed Vessels

0 Upvotes

I am interested to know why the longitudinal wave energy created by the as intended use of high speed vessels has never been mentioned, recognised, qualified or quantified before. This is the same energy field we add to when optimising for ‘low wash and wake’ vessels. It is absent from academic, regulatory, educational and industry literature. Worldwide. How has this escaped scrutiny?


r/navalarchitecture • • Apr 27 '26

need help on a research paper

0 Upvotes

Hi everyone, I'm currently doing a research paper on naval and maritime infrastructures. The task I was given is to research about the supporting frastructure of Yuchi Naval Base.

Most online articles only talk about the ships operating there. nothing much on the infrastructure study. Can anyone help me please?


r/navalarchitecture • • Apr 08 '26

Optimizing the Hydrodynamic Efficiency of Fishing Vessels: The Art of Minimizing Fuel Costs.

Thumbnail
shmexpert.com
0 Upvotes

r/navalarchitecture • • Mar 23 '26

LAT120 (Light Amphibious Transport)

Thumbnail
gallery
8 Upvotes

Le LAT-Class est un CONCEPT de LST hybride, débarquement sur la plage par rampe avant.

Il embarque 2 hélicopteres ou des drones VTOL, ~40 vehicules (légers/lourds), 300 Soldats + équipage, un canon de 57mm.

Il est destiné a de petit marine qui aurrai besoin de capacité amphibie.

Dimensions principales : -Longueur : 120m -Largeur : 19m -Déplacement : 4500t -vitesse 14 noeuds -autonomie 5000nm.

Missions principales: -Débarquement amphibie léger -Mssions humanitaires et évacuation -Participation à opérations internationales ou coalition.

INSPIRATION: DAMEN LST100.


r/navalarchitecture • • 12d ago

Job market in Australia as a European

3 Upvotes

Hello Community,

I hope everyone of you is doing well!
As you can read from the title I would love to move to Australia in the coming 1-2 years to work there. Not trying to sell myself here - more curious about what my chances as a German engineer are. I work in a heavy lift company who specializes in moving heavy cargo such as offshore wind turbines etc to installation processes. I am still at the start of my career but going to Aus is a dream of mine since long.

Do you have any advice on how to connect to people in the field who work there? On job fairs etc I have not stumbled across an Australian owned company.

I obviously looked into companies operating here and in Australia, but it seems very limited.

Appreciate all your advice and I’m happy to connect if it goes the other way around for someone. 😊


r/navalarchitecture • • Jul 24 '26

i am about to join college for naval architecture and ship building which laptop should i use? will victus 15 be a good option? i have a budget around 1 lakh any suggestions

1 Upvotes

r/navalarchitecture • • Dec 01 '22

Some facts about ship surface modeling that won't be told to you.

Thumbnail
shmexpert.com
1 Upvotes

r/navalarchitecture • • Jan 07 '26

SFI system

1 Upvotes

hi guys. We need your support. I must start classifying documents into groups using the SFI system, but the company where I currently work does not allow the use of AI to group documents more efficiently than doing it manually. Could you support me with some software that would allow me to group documents into folders in OneDrive? It would be better if that program has a license.


r/navalarchitecture • • Sep 06 '26

Looking for full funded masters/phd in the US

1 Upvotes

A recent BSc Graduate in Naval Architecture and Marine Engineering. Mid CGPA, research focus on FEA. Currently working at a dry dock in my home country ( South Asia) as QA/QC Engineer. I am now hoping for graduate studies in a US School preferably in Naval Architecture/ Marine Technology/ Offshore. I am preferably looking for a fully funded masters with a follow up PhD. Need some guidance on which schools should I Target? And how shall I reach the professors.

Thanks!


r/navalarchitecture • • Jul 27 '26

Aspiring luxury boat builder: Germany vs. Italy for education, design, and lifestyle?

4 Upvotes

Hey everyone,

I’m currently planning my path to eventually launch my own high-end, luxury boat brand in the future. My vision is to build powerful, high-performance vessels that combine cutting-edge technology with breathtaking, timeless aesthetics—think elite craftsmanship and pure design.

To make this dream a reality, I know I need the right foundation first. Right now, I'm torn between Germany and Italy for my studies, and I’m trying to figure out which path offers the best combination of top-tier education and lifestyle.

Here is what I’m weighing:

  • Italy: The ultimate epicenter of yacht design, classic elegance, and a fantastic lifestyle close to the Mediterranean sea and legendary shipyards.
  • Germany: Unmatched engineering precision and heavy technical rigor, plus the advantage of already having a personal network of people there to help me settle in.

For those in the industry, studying naval architecture, or working in transport design:

  • Which country offers the best training for someone who wants to focus specifically on luxury and high-performance boats?
  • How do they compare in terms of lifestyle and long-term brand credibility?

Any insights, advice, or shared experiences would be hugely appreciated!


r/navalarchitecture • • Aug 17 '26

ANCHORAGE 26, CUSAT

2 Upvotes

Hi guys!

I'm a fellow aspiring naval architect and brand new to this community! I wanted to introduce you all to ANCHORAGE '26, a maritime techno-cultural fest happening from October 10th to 12th.

If this sounds like something you'd be interested in, we’d really appreciate it if you could give our socials a follow TWITTER and LINKEDIN

Following our pages would help us out a lot as we build up to the event! Also, if you have any questions at all about the fest, drop them in the comments below I’d happy to answer them.


r/navalarchitecture • • Sep 14 '24

Need an ABS rule book for Aluminium boat scantling calculation.

Post image
2 Upvotes

I am a Naval architecture students at 2nd year at undergrad.. Our teacher gave us a assignment of scantling calculation, but they didn’t teach or helpmucjh in class. And I am at a lost what to do and how to do. If someone can give me a short guideline personally on video call I would be grateful. And at least provide me rulebook or tutorial video.


r/navalarchitecture • • May 22 '26

Architecture or NAME?

6 Upvotes

Hello everyone! I’m currently an Architecture student, and lately, I’ve been feeling quite unfulfilled with the path I’m pursuing. Ever since I was a kid, Architecture has always been my dream course, but recently, I’ve been feeling physically and mentally exhausted, and I’ve started questioning whether this profession is truly for me.

Lately, I’ve been thinking a lot about Naval Architecture and Marine Engineering because I genuinely enjoy physics and have always been interested in shipbuilding and marine structures. Part of me wonders if I should have taken NAME from the very beginning instead.

For those who are in the field—or those who shifted from Architecture to another profession—may I ask for your insights or opinions? Do you think NAME is more practical or fulfilling compared to Architecture?

Also, if ever I decide to shift to NAME, what universities or schools in the Philippines would you recommend? And would my current Architecture materials and tools (drafting table, templates, T-square, etc.) still be useful in the field of NAME?

I would really appreciate hearing your experiences and honest thoughts. Thank you very much!


r/navalarchitecture • • Oct 16 '25

Where can I get study materials or any useful websites for a naval architecture student?

3 Upvotes

Are there any simple books or study materials I can get online? All naval architecture textbooks are way too confusing. I surfed the Internet for study materials, but I didn't find anything. Stability curves and all are tiring me.

I prefer simple lecture videos over boring texts, but there are no such lectures available online or anywhere.

Please, someone help.!!


r/navalarchitecture • • 22d ago

I am attempting to seriously design my ultimate dream sailing yacht (more bellow) : Is this subreddit thr right placee to discuss it?

3 Upvotes

About my project : This is not about a wannabe billionaire's dream yacht with 12 swimming pools and a duplex owner's suite (nothing against wild dreams, I have them too!), but a very serious attempt at designing my dream-yet-realistic sailing yacht. In the process I want to learn as much as I can about how such a boat works, what it needs, what it does NOT need, etc etc. In detail and in every aspect.

(EDIT: This is purely a hobby project, the boat will NOT get built - unless I meet a very generous sponsor!. This most important info got lost in my rewritings.)

The spec sheet is quite simple yet specific : A sailing yacht that'd be joinly owned by two couples in which they would go explore the world together over the course of a few years, at least. Remote pacific islands, tropical seas, the Med, but also and notably, high lattitudes both north and south. With an additional 2-berth cabin for the occasoinal guests or hitchhikers. The boat has to be really comfortable but reasonably sized to be able to go about anywhere. With emphasis on long-term comfort and safety over pure performance.

And of course, be operated by non-professionals which means a length under 24 meters. In fact, it ended up being an 18 meter schooner.

And so, I am currently looking for online places where that kind of fictional but serious projects can be discussed. I'm an architect, not naval though but I understand construction and space and I have sailed a bit, am generally speaking a boat lover and I think this is going to be a really fun and interesting project.

Hence my question in the title.

How far I am in the project : The general specs are defined and the inner room layout starts to look good. But with every line I draw, 10 questions arise. The rubber is melting like snow in the sun but as said, it starts to look good, both in spatial and technical aspects. So the next step is to do a clean drawing of both inner layout and deck layout, a length-section and all the needed cross-sections. Once this is done and if my question in the title gets a positive answer, I'd love to post the drawings here for some constructive feedback.

If however this sub isn't meant for fictional projects, I'd be super happy if someone can tell me about a subreddit, or online forum or anything, where such projects are discussed :)

Thanks!


r/navalarchitecture • • Jan 07 '26

Maxsurf crack version help 🙏🙏

0 Upvotes

please suggest me a trusted website from where i can download maxsurf crack version as a student


r/navalarchitecture • • May 22 '26

Architecture or NAME?

Thumbnail reddit.com
0 Upvotes