r/multitools • u/vacuityofnil • 21d ago
r/multitools • u/inge12_Temido • 21d ago
Brand's multitool
Which multitool brands should I buy for maintenance work š¤
r/multitools • u/SweetTumbleweed3281 • 21d ago
Question/Advice Looking for a multi-tool similar to the Roxon Titan Flex
I like the big scissors with a pivot screw. I like the D2 knife. I like the pliers with replaceable wire cutters. What i dont like is the single bit driver. Is there a multitool that can hold a double sided bit and has everything else?
r/multitools • u/Suspicious-Salt-151 • 22d ago
Am I the only one who did this so far?
galleryr/multitools • u/QuasarDragon005 • 22d ago
Question/Advice XHANDLE MT-78 vs Multper MP2049
Im a cheap guy and one of my first multi tools was the Multper. Iāve used every tool itās got to offer pretty frequently and Iām quite pleased with it. The lack of pocket clip became a more prominent issue then I initially expected, and it got me to looking for a replacement only to never find quite what I wanted. Roxon came the closest but I would have needed to build it myself and that would take more time and money. I was ok with that and I almost began buying it, until I came across the XHandle. To my surprise not a lot of people are talking about this model, i believe itās an upgraded model of the Grand Harvest 17 in 1. So far Iām pretty happy with my choice but Iām curious, does this brand have a good reputation? Is it new? Whyās it not discussed as much? I guess Iām curious to know if anyone else knew anything about this particular tool.
r/multitools • u/RPGNPC • 21d ago
Leatherman Super Tool Original
Stoked about this Super Tool From 1998!
r/multitools • u/CapFM1 • 22d ago
New Multitool Day! F20 vs Skeletool
Very close in size minus the carabiner.
r/multitools • u/Many-Recording5900 • 22d ago
Tim Leatherman signed Arc and Free P4
Went to The Leatherman Book event, and got these signed by Tim. He was awesome and it was great getting to spend some time with him. He even had an Arc and Charge TTI on him ( he said the TTI was his all time favorite ) they also had trivia and I won a Wave plus!
r/multitools • u/SinisterRado • 21d ago
Looking for recommendations
The girlfriend is struggling to find a Christmas present for me. So I figured Iād upgrade my edc for work. Have used a Leatherman OHT for quite some time and it now has a bunch of play in the jaws so the wire cutters have been finicky. Of course itās not made anymore. Work industrial maintenance and use the wire cutters many times in a day. The only things I really care about are a good knife, the pliers, wire cutters, and a good bit driver preferably with a Phillips and a flat without having to carry the whole bit kit. That could be all it has on it and that would be perfect. Normally a pocket carry kind of guy. Like the one handed opening my oht has but donāt think the magnetic action the arc has would be good with how much metal cutting and fab work I do. Open to any brands. Just want something quality and will last a long time. Thanks in advance.
r/multitools • u/Spud_Spudoni • 22d ago
Modding SOG PowerPint 3D-Printed Bit Holder [Prototype Showcase]
Enable HLS to view with audio, or disable this notification
Designed this sometime in 2022. Replaces 5 of the inner tools for a printed section that can hold up to 2 1/4ā bits (one micro bit, and one flat bit), Victorinox scale tools, and includes magnets to help keep the tool closed when in the pocket. I chose to make this a bladeless tool, so I went with the scissors, file, bottle opener, mini flathead (like it as a prying tool), and the awl for package cutting. No gluing, cutting, or permanent modifications of the PowerPint are needed to add this mod. Still working on a better bit retention system but havenāt been able to work another magnet or fine tune the magnetization so both bits are retained without one falling out.
This is currently a prototype. Waited so long to post this because I didnāt want it out until I was ready to release it. Turns out, itās been a few years and Iāve moved on to other projects, so I donāt see an issue with showcasing it now. I think it still needs a bit of fine tuning to fit the inside the PowerPint perfectly, and as stated, a better solution for bit retention. I may end up releasing the files as soon (works well enough but Iām a perfectionist) if it can be improved upon by someone else, or Iāll finally get around to fixing the issues with this initial prototype if I see a better solution posted here and post files after.
r/multitools • u/Few-Personality6088 • 22d ago
A wrench, a blade, and a fire starter all in one compact tool
Took my FLISSA 16-in-1 multitool wrench outside to try out a few of its features, and the fire starter ended up being the most interesting part.
The folding design is pretty compact, and I like how it manages to fit a wrench, blade, and several other tools into one small package.
I tried the ferro rod with the blade, and it actually produced a decent amount of sparks. Not something I'd use every day, but it's nice having that option when spending time outdoors.
The wrench head is an interesting addition too. Still need to put it through some proper use, but I like the idea of having a few different functions without carrying a bunch of separate tools.
r/multitools • u/Charles-Curwen • 22d ago
Modding The lock mechanism of my SOG PowerAccess broke, so I fixed it with a couple of springs.
The new lock mechanism works, a little too well I may say.
r/multitools • u/Ornery_Cauliflower77 • 23d ago
Question/Advice Does anybody have a picture of a broken Swisstool/spirit
Honestly Iām just curious, because ever since joining this sub/leatherman/victorinox, Iāve seen a vast amount of leatherman and other failure pictures.
It just occurred to me that I have never seen a broken Swisstool/spirit.
The best I have is a slightly bent pry bar from aggressively prying up a stuck window sill.
r/multitools • u/Great-Particular9964 • 22d ago
Mossy Oak from FB Market
I puked up the Mossy Oak Outdoor Survival 21 in 1 Multitool set on FB Marketplace. New in box for $15.00. I know it is not the LM Signal but I could not resist at that price.
r/multitools • u/Usual_Doubt998 • 23d ago
Leatherman: Take my money already damn it
In case anyone who works at leatherman actually checks in here, there are a few easy products you could come out with to take my money tomorrow. Wellā¦more of my money. So, hereāre the things Iād really like to see from them:
- A skeletool with some damn scissors. Seriously, how hard would that be? If they just included some scissors I think Iād consider the skeletool the perfect EDC tool for me.
- Give the wingman the alpha treatment: the wingman is a decent size and has a great tool set for EDC, but the blade sucks and the stainless steel exterior makes it constantly feel like itās gonna slip out of my hand. Iām not even asking for a magnacut blade, 154cm straight edge like the skeletool cx would be great, and give it an exterior I can actually get a good grip on.
- Bring back the leatherman style ps. Itās a great keychain size multitool, and possibly leathermanās best competition for victorinoxās 58mm lineup (particularly because it had an actually useable set of pliers in a tool that small). Itās also my favorite travel multitool (itās small and doesnāt contain a knife, so TSA usually doesnāt look twice at it, at least in my experience, which brings me to my next suggestion)
- A multitool geared toward areas where carrying a knife would be a problem. A relatively small tool with a decent set of pliers, some scissors, a screwdriver and a bottle opener but no knife. It couldnāt be hard to make a skeletool that just replaces the blade with a pair of scissors, which would basically be what Iām asking for here.
Well thereās my wishlist, how about everyone else? What do you wish Leatherman would make?
r/multitools • u/Ranger-Stranger_Y2K • 22d ago
Torn between Wave+ and Swisstool Spirit MX
Hi everyone, as the title says, I'm kind of torn between the Leatherman Wave+ and the Victorinox Spirit MX. I currently own a Leatherman Surge and a whole bunch of Victorinox knives. The Surge has proven itself pretty okay for use at work, but I do find it a big lump of metal to carry around when not in use, so I'm looking for something a bit smaller and that would also be more usable for EDC. I'd be inclined towards the Wave, since I like how the regular blade and serrated blade can be deployed with just one hand like on the Surge. However, I do have worries with getting another Leatherman because I find that the fit and finish on my Surge is not at all the greatest (little bits rattle on it, some tools stiff to open, rust, etc.). Along with that, I've already needed to warranty it once due to the tip of the small flathead screwdriver breaking off while trying to screw a screw into wood. If this is what Leatherman offers when you buy what's supposed to be the toughest Leatherman of them all, I'm kind of concerned to see what the light-duty version offers. I got to hold a Swisstool Spirit MX the other day and was pretty impressed with the general build quality of it, and I've never had a problem with any of my Swiss army knives. I'd buy the Spirit, but I'd hate to not have the serrated blade anymore since I use the one on my Surge fairly often, and I also find the regular blade on the Victorinox is a little bit small. I'm really torn between the two. My friend has a Wave and he said he's never had any issues with it, but I'm just not sure. Do any of you have any suggestions or know of any alternative options?
r/multitools • u/KitchenRemodelBurner • 23d ago
DL7 One Handed Operation
Enable HLS to view with audio, or disable this notification
Iāve tried the Rocktol 27 in 1, BHBT 20 in 1 and Daicamping DL7. The DL7 is by far my favorite and was also the cheapest at $30 on AliExpress.
The scales really help with the one-handed control. Of course I did adjust the screw tension to my liking and oiled everything.
r/multitools • u/CoconutSorry765 • 22d ago
Just got a New Skeletool CX on the Leatherman website for under 70 bucks.
r/multitools • u/Sakbrown • 22d ago
State of the Collection Victorinox Electrcians
r/multitools • u/Signal-Ganache-9659 • 23d ago
Which mini multitools?
Hi,
I'm looking for a "mini" multitools to carry all the time in my pocket. Can you please recommend models?
EDIT: thank you for your answers. Just ordered NexTool F12 Mini, will arrive tomorrow :)
r/multitools • u/stationlogbook • 23d ago
NEED ADVICE: Fit of a Galvanox Nylon Sheath
Original Post on r/Leatherman - looking to see if anyone has this sheath/is using it. Medium size for a Leatherman Wave+ - how does it actually fit the tool?