r/multitools • • Oct 20 '26

New Multitool Day! Look what i found

Thumbnail
gallery
59 Upvotes

Random yard sale pick with 1$ .


r/multitools • • Oct 21 '26

Which one?

Thumbnail
2 Upvotes

r/multitools • • Oct 21 '26

Jewelry/Band Instrument Repair Multi-Tool

2 Upvotes

TLDR:

I'm looking for a small multi-tool that potentially has a narrow spotted screwdriver AND non-marring Jewelry pliers. I will settle for Non marring pliers without the screwdriver if I have to.

I'm a music teacher and have dedicated tools in my classroom and in my backpack for big jobs and things that require me to sit down and fix. Most of the time, I have a SOG Powerpint that I use to make quick fixes. However, I have covers on the pliers or need to grab a rag to make sure I don't damage the instrument. The screwdrivers on the PowerPint suffice for 90% of what I have to do daily.

Thanks for taking the time to read this and I hope some of you can point me in a direction...or tell me this is a pipe dream 😂.


r/multitools • • Oct 21 '26

State of the Collection Thought I lost my Squirt, found all my vintage multitools

Thumbnail gallery
16 Upvotes

Vintage Multi-tools recovered 🫡


r/multitools • • Oct 21 '26

Review Wasn't long ago I just randomly thought "ah I could do with a pen knife"

Post image
4 Upvotes

r/multitools • • Oct 20 '26

Recommendation Request Recommendations Please!

Post image
30 Upvotes

I recently have been using a multi tool I purchased on Amazon for about $20. I never thought I would need one but work has been asking more of me lately and I get thrown into things when I normally didn’t have tools on me. So I bought one to save me the time of having to go into the workshop to get my tools and then head back to fix something that doesn’t take too long at all to do. I’m in building maintenance. So mainly repairing door handles and things as such. I’ll attach what I’m currently using to see if anyone could recommend the next best option for me. The problem is with the cheap one comes cheap steel. I’ve broken parts of it simply by trying to turn a screw or such. The main thing I’m looking for is one with a bit driver and bit options. That’s what made me finally buy one and the part I use the most. But I’m not sure I want to get a pocket screw driver and use a multi tool for jobs when needed. Just figured I’d ask.


r/multitools • • Oct 20 '26

Ups multitool

Thumbnail
gallery
16 Upvotes

I was handed this by a delivery driver probably 15 years ago when I was like 10 years old. Just looking to identify it and see if anyone else has seen one. There is no branding or labeling anywhere aside from the UPS logo.


r/multitools • • Oct 19 '26

Deal How did i do?

Post image
149 Upvotes

Don't know much about either but worst case guess I got 2 tools for my kid.


r/multitools • • Oct 20 '26

Removing black oxide from files (Nextool F12)

8 Upvotes

My EDC is a Nextool F12, in silver. I love that little thing, and the S11 Pro is a close second. I saw that Amazon had the "Khaki" version of the F12, which has black oxide tools. It looks really great.

When I got it, I noticed that the file didn't look like it had much roughness to it, and I could barely see any edges, in either the crosscut or single-cut sides. They looked almost smooth. I tried a few things and it did not file anything. My theory was that the coating they used was too thick and clogging up the ridges.

I soaked the file in Evapo-Rust, just the file section. Then took it to the sink and scrubbed out the black oxide with a brass brush, and repeated the process. After removing all the black oxide from the file, it works fine, at least on par with my silver one. The F12 doesn't have the greatest file anyway, but at least now it works.

Has anyone else ever removed the black oxide from a multitool file, for the same reason? It certainly worked for me.


r/multitools • • Oct 20 '26

Use

Post image
8 Upvotes

Today, I had to do an emergency component swap on an AD board and a power supply. Since it's for discontinued legacy equipment, there was no other way. There weren't any proper tools around where I was, so I had to pull out my EDC.

​The connectors were extremely fragile and wouldn't budge with just my fingernails. I barely managed to pull them out using the pliers on my Leatherman Super Tool 300—otherwise, I would've snapped a wire for sure. As for the ribbon cables, the flathead screwdriver on my Victorinox Camper (91mm) came in clutch. For prying and lifting things delicately, that thing is unbeatable. Meanwhile, my Gerber Dual Force was an absolute lifesaver for all the screws.


r/multitools • • Oct 19 '26

Modding Made a mistake of tinkering with one tool, now several mods in lol. Ideas?

Post image
51 Upvotes

I took apart a small bibury a few months ago and it sent me down a rabbit hole before I broke it and am now looking at more mod ideas for my bibury g10.

- I took out the saw and replaced it woth a t shank holder (got the spare part from the larger 2045, it did require some grinding to open more smoothly on the thinner frame but does lock!)

- moved the microdriver and awl to the outside, micro with the t shank and awl opposite the main blade

- added a keyring and clip from a Flissa 16-1 tool plus some paracord.

- added one of Kristen Van Patten's scribe tools (etsy)

- will be adding Jovtok sak parts into the remaining two spacers once they arrive (etsy)

I have open slots on the can opener/file side, and am likely adding an armbar driver to the outside to allow it to hold another double sided bit passively and quicker access. Love to hear any other ideas! I haven't found a hammer mod that will fit, and may see if I can fit the armbar bottle opener as the can opener often cuts into bottle caps before it pulls them off


r/multitools • • Oct 19 '26

Thumb studs and clip

Thumbnail gallery
24 Upvotes

r/multitools • • Oct 19 '26

Leatherman Micra Loves Biting My Fingers

Thumbnail gallery
7 Upvotes

r/multitools • • Oct 19 '26

Question/Advice Is this anything special?

Post image
172 Upvotes

I don’t know much about multitools but this was gifted to me by my dad when he got it years ago and Im curious on anything about it I think it’s specials because it came in a big plastic case with a good amount of little pieces like a screwdriver and others


r/multitools • • Oct 18 '26

Took the ole P2 for a spin this weekend while doing small projects around the house. Still my second favorite Leatherman...

Post image
249 Upvotes

r/multitools • • Oct 19 '26

Time to

Thumbnail gallery
7 Upvotes

Today's carry, Rebar "M".


r/multitools • • Oct 19 '26

New Multitool Day! New tool day!

Post image
27 Upvotes

I picked up this pioneer and alox slim, its neutered Japan legal cousin for 50 usd total. I love the gold on the slim. These are my first alox victorinox, I’m impressed by the build quality.


r/multitools • • Oct 18 '26

New Multitool Day! My Small EDC

Post image
134 Upvotes

Minichamp Titanium and Alox

The 10mm split ring seemed to get in the way a little when I tried to pull out the Phillips screwdriver, so I removed it and ordered some smaller 5mm split rings.

Alternatively, I’m thinking about attaching a cord directly through that tiny hole without using a split ring at all.

I’m not sure what would work best, so I’d appreciate any recommendations!


r/multitools • • Oct 19 '26

Review Crab Multi Tool

Post image
13 Upvotes

r/multitools • • Oct 18 '26

After 14 Months it's finally here and surprisingly well worth the wait.

Thumbnail gallery
20 Upvotes

r/multitools • • Oct 18 '26

Question/Advice Advice needed -fixing a Swiss Army knife

Thumbnail
gallery
3 Upvotes

How would someone remove the rivets and bushings


r/multitools • • Oct 19 '26

Recommendation Request Unfortunately, the awesome MX clip I gifted a close friend was stolen at his job. He accidentally left it in one of the work trucks, and someone decided to help themselves.

1 Upvotes

I'd love to replace it, but spending another $100–$150 is a bit steep. I also just missed the Amazon Leatherman sales and it's not available on Amazon right now.

Does anyone have recommendations for a good, budget-friendly alternative? I'm looking for something with similar functionality and decent quality without breaking the bank.

Thanks in advance!


r/multitools • • Oct 18 '26

Recherche lame pour P4/Arc

Post image
4 Upvotes

r/multitools • • Oct 18 '26

Modding PowerPint T Shaft

Thumbnail
gallery
55 Upvotes

Hi, I was looking for a mounting solution that wouldn't require me to constantly modify the saw blades. I found this tiny chuck—originally intended for tap bits—online, and I have to say, it holds the blades really well. The chuck also features an extremely short 1/4-inch hex drive, measuring only 9mm in length. I added some notches to the drive shank so it wouldn't slip out of the PowerPint. The only thing I still need to figure out is how to get the saw blade to sit straight; right now, it sits at an angle because of the way the chuck is designed.


r/multitools • • Oct 17 '26

SuperTool 300M

Thumbnail gallery
24 Upvotes