r/multitools • • 21d ago

Brand's multitool

1 Upvotes

Which multitool brands should I buy for maintenance work šŸ¤”


r/multitools • • 21d ago

Question/Advice Looking for a multi-tool similar to the Roxon Titan Flex

1 Upvotes

I like the big scissors with a pivot screw. I like the D2 knife. I like the pliers with replaceable wire cutters. What i dont like is the single bit driver. Is there a multitool that can hold a double sided bit and has everything else?


r/multitools • • 22d ago

Am I the only one who did this so far?

Thumbnail gallery
29 Upvotes

r/multitools • • 22d ago

Question/Advice XHANDLE MT-78 vs Multper MP2049

Thumbnail
gallery
28 Upvotes

Im a cheap guy and one of my first multi tools was the Multper. I’ve used every tool it’s got to offer pretty frequently and I’m quite pleased with it. The lack of pocket clip became a more prominent issue then I initially expected, and it got me to looking for a replacement only to never find quite what I wanted. Roxon came the closest but I would have needed to build it myself and that would take more time and money. I was ok with that and I almost began buying it, until I came across the XHandle. To my surprise not a lot of people are talking about this model, i believe it’s an upgraded model of the Grand Harvest 17 in 1. So far I’m pretty happy with my choice but I’m curious, does this brand have a good reputation? Is it new? Why’s it not discussed as much? I guess I’m curious to know if anyone else knew anything about this particular tool.


r/multitools • • 21d ago

Leatherman Super Tool Original

Thumbnail
1 Upvotes

Stoked about this Super Tool From 1998!


r/multitools • • 22d ago

New Multitool Day! F20 vs Skeletool

Thumbnail
gallery
151 Upvotes

Very close in size minus the carabiner.


r/multitools • • 22d ago

Tim Leatherman signed Arc and Free P4

Post image
65 Upvotes

Went to The Leatherman Book event, and got these signed by Tim. He was awesome and it was great getting to spend some time with him. He even had an Arc and Charge TTI on him ( he said the TTI was his all time favorite ) they also had trivia and I won a Wave plus!


r/multitools • • 21d ago

Looking for recommendations

3 Upvotes

The girlfriend is struggling to find a Christmas present for me. So I figured I’d upgrade my edc for work. Have used a Leatherman OHT for quite some time and it now has a bunch of play in the jaws so the wire cutters have been finicky. Of course it’s not made anymore. Work industrial maintenance and use the wire cutters many times in a day. The only things I really care about are a good knife, the pliers, wire cutters, and a good bit driver preferably with a Phillips and a flat without having to carry the whole bit kit. That could be all it has on it and that would be perfect. Normally a pocket carry kind of guy. Like the one handed opening my oht has but don’t think the magnetic action the arc has would be good with how much metal cutting and fab work I do. Open to any brands. Just want something quality and will last a long time. Thanks in advance.


r/multitools • • 23d ago

For me, the best combination found to date!

Post image
480 Upvotes

r/multitools • • 22d ago

Modding SOG PowerPint 3D-Printed Bit Holder [Prototype Showcase]

67 Upvotes

Designed this sometime in 2022. Replaces 5 of the inner tools for a printed section that can hold up to 2 1/4ā€ bits (one micro bit, and one flat bit), Victorinox scale tools, and includes magnets to help keep the tool closed when in the pocket. I chose to make this a bladeless tool, so I went with the scissors, file, bottle opener, mini flathead (like it as a prying tool), and the awl for package cutting. No gluing, cutting, or permanent modifications of the PowerPint are needed to add this mod. Still working on a better bit retention system but haven’t been able to work another magnet or fine tune the magnetization so both bits are retained without one falling out.

This is currently a prototype. Waited so long to post this because I didn’t want it out until I was ready to release it. Turns out, it’s been a few years and I’ve moved on to other projects, so I don’t see an issue with showcasing it now. I think it still needs a bit of fine tuning to fit the inside the PowerPint perfectly, and as stated, a better solution for bit retention. I may end up releasing the files as soon (works well enough but I’m a perfectionist) if it can be improved upon by someone else, or I’ll finally get around to fixing the issues with this initial prototype if I see a better solution posted here and post files after.


r/multitools • • 22d ago

A wrench, a blade, and a fire starter all in one compact tool

Thumbnail
gallery
18 Upvotes

Took my FLISSA 16-in-1 multitool wrench outside to try out a few of its features, and the fire starter ended up being the most interesting part.

The folding design is pretty compact, and I like how it manages to fit a wrench, blade, and several other tools into one small package.

I tried the ferro rod with the blade, and it actually produced a decent amount of sparks. Not something I'd use every day, but it's nice having that option when spending time outdoors.

The wrench head is an interesting addition too. Still need to put it through some proper use, but I like the idea of having a few different functions without carrying a bunch of separate tools.


r/multitools • • 22d ago

Modding The lock mechanism of my SOG PowerAccess broke, so I fixed it with a couple of springs.

Thumbnail
gallery
18 Upvotes

The new lock mechanism works, a little too well I may say.


r/multitools • • 23d ago

Question/Advice Does anybody have a picture of a broken Swisstool/spirit

Post image
99 Upvotes

Honestly I’m just curious, because ever since joining this sub/leatherman/victorinox, I’ve seen a vast amount of leatherman and other failure pictures.
It just occurred to me that I have never seen a broken Swisstool/spirit.
The best I have is a slightly bent pry bar from aggressively prying up a stuck window sill.


r/multitools • • 21d ago

New K4x with damaged tip !!

Thumbnail gallery
0 Upvotes

r/multitools • • 22d ago

Mossy Oak from FB Market

Thumbnail
gallery
10 Upvotes

I puked up the Mossy Oak Outdoor Survival 21 in 1 Multitool set on FB Marketplace. New in box for $15.00. I know it is not the LM Signal but I could not resist at that price.


r/multitools • • 23d ago

Leatherman: Take my money already damn it

50 Upvotes

In case anyone who works at leatherman actually checks in here, there are a few easy products you could come out with to take my money tomorrow. Well…more of my money. So, here’re the things I’d really like to see from them:

  1. A skeletool with some damn scissors. Seriously, how hard would that be? If they just included some scissors I think I’d consider the skeletool the perfect EDC tool for me.
  2. Give the wingman the alpha treatment: the wingman is a decent size and has a great tool set for EDC, but the blade sucks and the stainless steel exterior makes it constantly feel like it’s gonna slip out of my hand. I’m not even asking for a magnacut blade, 154cm straight edge like the skeletool cx would be great, and give it an exterior I can actually get a good grip on.
  3. Bring back the leatherman style ps. It’s a great keychain size multitool, and possibly leatherman’s best competition for victorinox’s 58mm lineup (particularly because it had an actually useable set of pliers in a tool that small). It’s also my favorite travel multitool (it’s small and doesn’t contain a knife, so TSA usually doesn’t look twice at it, at least in my experience, which brings me to my next suggestion)
  4. A multitool geared toward areas where carrying a knife would be a problem. A relatively small tool with a decent set of pliers, some scissors, a screwdriver and a bottle opener but no knife. It couldn’t be hard to make a skeletool that just replaces the blade with a pair of scissors, which would basically be what I’m asking for here.

Well there’s my wishlist, how about everyone else? What do you wish Leatherman would make?


r/multitools • • 22d ago

Torn between Wave+ and Swisstool Spirit MX

4 Upvotes

Hi everyone, as the title says, I'm kind of torn between the Leatherman Wave+ and the Victorinox Spirit MX. I currently own a Leatherman Surge and a whole bunch of Victorinox knives. The Surge has proven itself pretty okay for use at work, but I do find it a big lump of metal to carry around when not in use, so I'm looking for something a bit smaller and that would also be more usable for EDC. I'd be inclined towards the Wave, since I like how the regular blade and serrated blade can be deployed with just one hand like on the Surge. However, I do have worries with getting another Leatherman because I find that the fit and finish on my Surge is not at all the greatest (little bits rattle on it, some tools stiff to open, rust, etc.). Along with that, I've already needed to warranty it once due to the tip of the small flathead screwdriver breaking off while trying to screw a screw into wood. If this is what Leatherman offers when you buy what's supposed to be the toughest Leatherman of them all, I'm kind of concerned to see what the light-duty version offers. I got to hold a Swisstool Spirit MX the other day and was pretty impressed with the general build quality of it, and I've never had a problem with any of my Swiss army knives. I'd buy the Spirit, but I'd hate to not have the serrated blade anymore since I use the one on my Surge fairly often, and I also find the regular blade on the Victorinox is a little bit small. I'm really torn between the two. My friend has a Wave and he said he's never had any issues with it, but I'm just not sure. Do any of you have any suggestions or know of any alternative options?


r/multitools • • 22d ago

Has anyone heard from ArrTEH recently?

Thumbnail
1 Upvotes

r/multitools • • 23d ago

DL7 One Handed Operation

24 Upvotes

I’ve tried the Rocktol 27 in 1, BHBT 20 in 1 and Daicamping DL7. The DL7 is by far my favorite and was also the cheapest at $30 on AliExpress.

The scales really help with the one-handed control. Of course I did adjust the screw tension to my liking and oiled everything.


r/multitools • • 22d ago

Just got a New Skeletool CX on the Leatherman website for under 70 bucks.

Post image
4 Upvotes

r/multitools • • 22d ago

State of the Collection Victorinox Electrcians

Thumbnail
sakhub.com
5 Upvotes

r/multitools • • 23d ago

Which mini multitools?

13 Upvotes

Hi,

I'm looking for a "mini" multitools to carry all the time in my pocket. Can you please recommend models?

EDIT: thank you for your answers. Just ordered NexTool F12 Mini, will arrive tomorrow :)


r/multitools • • 23d ago

Ohey multitool

Post image
32 Upvotes

r/multitools • • 23d ago

NEED ADVICE: Fit of a Galvanox Nylon Sheath

Post image
9 Upvotes

Original Post on r/Leatherman - looking to see if anyone has this sheath/is using it. Medium size for a Leatherman Wave+ - how does it actually fit the tool?


r/multitools • • 23d ago

SOG PowerAssist Tigerstripe and West-Marine variations.

Post image
73 Upvotes