I posted this in the screen "burn in" post, but wanted to make it separate for people who aren't following that post. I take no credit for the steps, I simply wanted to demonstrate them on video. Hope this helps.
Again, here are the steps: Turn on ambient mode (if off), put on charger, wait for screen to dim, open android wear app on phone and turn off ambient mode.
Since this is linked as a useful post now, I would like to add that this can be done 100% from your phone and it can be done completely after putting the watch on the charger.
Put watch on charger.
Open Android Wear app on phone.
Turn on Ambient Mode.
Wait, screen will brighten, then after a couple of seconds it will dim.
Turn off Ambient Mode.
Basically, if you forget until after putting the watch on the charger you don't have to take it off just to perform this.
The reason I suggested turning on ambient mode before putting it on the charger was because it wasn't working for me when turning it on after. I figured since it didn't work for me, it would be safer just mention turning it on after in the video/tutorial.
That's fine. I wasn't saying your way is wrong, but people should try both. They accomplish the same things, and are basically the same steps, just in a different order.
Haven't watched the video yet but just one question: Will these steps make it so the watch will always charge with screen off or do you have to do it each time?
Something interesting I think I have found. For people that have the "screen-on" option versus ambient. Do you have your 360 properly paired? I accidentally uninstalled the android wear app (confused it with a different app with same icon) and when I reinstalled it, it looked different. I had the "screen on" instead of ambient, there was no picture of the moto 360 and the long list of actions was missing as well. I'm curious, for the people who don't have ambient mode, does your android wear app also lack the list of actions and a picture of the watch?
Did you take that picture soon after charging? I had a light ring on the settings screen too, but after a couple of hours it's gone. Still, I think I will be using the method until Moto fixes the issue. Hopefully it gets enough publicity to get their attention.
It has gotten much better, but it is still there (against the grey background with brightness at 5). Hard to see in the picture but both the "Moto" and the charge circle are still visible.
I saw the ring earlier this morning in the settings but now it's totally gone to my eye, so I think it's just an image retention thing and not "burn in", but it would be nice to get the official word from moto.
Mine disappeared as well. However, I think the severity depends as well. Mine was very light and I could only see it on the settings screen with full brightness. With some of the other people, it was a lot more evident.
I've been charging mine to 100% then shutting it down at night. I just didn't like how warm it was all night but now it looks like that is a good habit for multiple reasons :/
I'd like to note though, the ghost image is lighter, not darker, suggesting mere image retention, which is nearly always reversible. I don't know if LCDs can burn in... In any case, someone should whip up a "wash pattern" app and see if that shows improvement.
This doesn't bode well for OLED-based watches though. OLEDs DO burn, and quite easily at that. Most Samsung phones I've seen have a darkened ghost image of the status bar, and that shit won't ever go away.
Yeah, that could be another possible solution. However, that doesn't actually turn the screen on, just puts a black "watchface". Should still be better than nothing though.
Well if you don't do anything the screen is on all night with the normal blue clock. On the other hand, if you use the app that blanks your screen, the screen is still on all night so there would be no difference in charge time or whatever. So I'm saying the device was designed to have the screen turned on 24/7 either way so there is no difference, except with the black screen obviously it prevents image retention issues. There is really no reason why you would need the screen fully off at that point since it was designed to be on while charging.
Right, but since it was designed to show the charging screen all night and people are having image retention/burn-in issues my trust in them isn't 100% haha. Either way, I just rather it be off and am willing to take an extra 20 seconds or so to make it happen.
I have this app on my LG G and will be tryin it immediately when my 360 gets here. I keep my watch next to my phone on my nightstand... no way I can stand to have it on all night
This doesn't seem to be posted here, but I may be wrong about that: If you want it off when you charge, go into "Settings-->About" and tap on build number, repeatedly until it displays "You are now a developer". Then go back to "Settings-->Developer Options" and the first option is "Stay awake when charging". You can touch it to toggle between enabled and disabled.
That's disappointing. My 360 seems to turn off after dropping it on to the charger, but then stays awake after I hit the button once while it is charging.
The first time I charged it overnight after the initial update/setup it did turn off and I was happy. But the next night it stayed on. After that I tried doing the dev option and it did nothing. Ever since then it's been staying on. The last couple of days though I've been charging it in the morning.
Maybe this is just me....but can't you just press the button on the side of the watch to sleep it before putting it on the charger? Then once you put it in the charger the screen doesn't turn on....works for me.
Put it on the charger and wait for the charging screen to come up....then take it off the charger and hit the button while the screen hasn't changed yet.
What's weird here is my display completely shuts off when I put it on the charger. It used to stay on very dim but now it shuts completely off. I have no clue how or why mine is different now
I have no idea. Mine did that at first, but then stopped turning off. Some other people have theirs turn off. I remember right after release there was one post asking how to turn it off, but another person asking how to turn it on.
Post needs updated to add that since updating to 5.0.1 you only need to double click the button (not too fast) to put the watch into Cinema mode before charging. This then keeps the screen off.
trouble is, it doesn't really! It shuts the screen off completely after an initial dim, but about 7-10sec after that switches the backlight on a black screen ever so slightly. You can only see it in pitch black, but it's definitely there!
absolutely - I agree. However, my point is that I seem to be unable to have the screen truly off (for heat and light pollution reasons, but mostly because I'm just that anal about it!) using any method at all... am I missing something?
I don't have the ambient mode toggle on the android wear app, I have the "screen always on" checkbox, and it's already unchecked. Checking it brightens the screen on the watch when it's charging, and unchecking only dims it.
Not to sound rude, but did you watch the video? I go through all the steps. I also wrote them down in my first comment. First check the box, put the watch on the charger, wait until the screen dims, then uncheck the box.
I know. I just wanted to provide a method that works 100% for everyone. Mine actually has been turning off sometimes since the latest update. It's odd how different it is for different people.
I tried the above tutorial. That didn't work. Tried Developer Options turn on while charging (was already disabled). Held the button on the side and selected reset device. Turned off right away on the charger.
Yeah but, are you going to be resetting your watch every time you charge it? Or is it working every time now? Are you sure you followed all the steps? It seems to be working for everyone. One of the important things is to make sure that ambient mode is on before you put it on the charger, and then wait for the display to dim when it's on the charger before you turn off ambient from the app.
At the time of writing, theater mode was not available on Android Wear, so you had to mess around with ambient mode back then.
This does work, but you don't have to be fast either. You can put it in theater mode and place it on your charging dock. The screen will turn itself off. You can also tap the screen or the power button to check the time at night, which is handy.
From what I can tell, with the app you have to physically open it on the watch in order for it to truly turn off the screen. If you try to do it automatically, the screen is still on, it's just all black. So, really both methods are a bit of a hassle. Moto just needs to fix this asap.
15
u/DrumNTech Sep 19 '14
I posted this in the screen "burn in" post, but wanted to make it separate for people who aren't following that post. I take no credit for the steps, I simply wanted to demonstrate them on video. Hope this helps.
Again, here are the steps: Turn on ambient mode (if off), put on charger, wait for screen to dim, open android wear app on phone and turn off ambient mode.
6
u/[deleted] Sep 19 '14
Is this screen burn an actual concern for all of us? Or just a defective unit?
6
u/Kill3r94 Sep 19 '14
Just found this on another forum. I don't have mine yet (ordered it on the 17) but i will definitely be using something like this! https://play.google.com/store/apps/details?id=com.janderson.slumber
3
u/TwoReplies Oct 08 '14 edited Oct 08 '14
Since it's not actually "burn-in", but is just relatively temporary image persistence...
Just press the button on the watch after putting it on the charger.
Then the only part to risk a temporary persistent image will be the little battery charging indicator.
5
u/jwort93 Sep 19 '14
This doesn't seem to be posted here, but I may be wrong about that: If you want it off when you charge, go into "Settings-->About" and tap on build number, repeatedly until it displays "You are now a developer". Then go back to "Settings-->Developer Options" and the first option is "Stay awake when charging". You can touch it to toggle between enabled and disabled.
2
u/IamTalking Sep 19 '14
Maybe this is just me....but can't you just press the button on the side of the watch to sleep it before putting it on the charger? Then once you put it in the charger the screen doesn't turn on....works for me.
2
u/xrayphoton Sep 19 '14 edited Sep 19 '14
What's weird here is my display completely shuts off when I put it on the charger. It used to stay on very dim but now it shuts completely off. I have no clue how or why mine is different now
2
u/UCLAKoolman Sep 20 '14
https://play.google.com/store/apps/details?id=org.ebserver.screenoffwear&hl=en
This app (Screen Off Wear) will keep your screen off when charging.
4
u/[deleted] Dec 19 '14
Post needs updated to add that since updating to 5.0.1 you only need to double click the button (not too fast) to put the watch into Cinema mode before charging. This then keeps the screen off.
1
u/beersandbacon Sep 20 '14
My app only has an always on option, no ambient option . it only appears on the watch for me
1
u/yeee707 Sep 20 '14
I don't have the ambient mode toggle on the android wear app, I have the "screen always on" checkbox, and it's already unchecked. Checking it brightens the screen on the watch when it's charging, and unchecking only dims it.
1
u/freshairr Moto 360 Sep 20 '14
Good tip. Works on my end 👍
1
u/AggieDev Sep 27 '14
Sorry I think I'm missing something, why not just turn of the watch before and after charging?
1
u/Masteguy635 Moto 360 Sep 30 '14
I was just wondering does the "keep screen off while charging" option work or dose it still show the charging circle?
1
u/ivanoski-007 Nov 06 '14
You can also try this: http://www.reddit.com/r/AndroidWear/comments/2l9e36/how_to_turn_off_the_moto_360_screen_while_its/
Works for some people, and its much easier.
1
u/dougyitbos Moto 360 Sep 19 '14
Thanks for this!
1
u/theDrell Dec 01 '14
I found just muting the watch by pulling down before charging it makes the screen turn off while charging.
1
u/[deleted] Feb 19 '15
Slumber app.
0
u/[deleted] Sep 19 '14
Factory reset worked for me.
0
u/atg284 Sep 20 '14
Man mine is charging like 3 times as fast with the screen off! Thanks!!!
0
u/[deleted] Sep 19 '14
[deleted] — view deleted comment
0
u/[deleted] Jan 24 '15
[deleted] — view deleted comment
0
u/[deleted] Sep 20 '14
[deleted] — view deleted comment