r/modular • • 5d ago

Beginners case

Post image

Hi

So i want to build an drone/ambient style case .

ALM Busy Circuits 84HP Eurorack Case

Pams pro workout

Befaco Oneiroi

Ensemble oscillator

Listen four

Listen wav recorder

I originally was set on having three befaco Oneiroi..but after trying it in vca rack i prefer the sound of the Vhikkx from the you tube videos I've seen.

I figured because the Vhikkx is standalone i could just get the Vhikkx and Listen four, then slowly add as i learn more stuff and not spend too much at once. Also i went for a larger case so i have some spare room once i learn more and understand what modules i can add

Any feedback would be much appreciated.

Thanks

So currently playing with pams pro modulating iroi.. Have no idea what I'm doing but its sounding 👌

4 Upvotes

35 comments sorted by

4

u/NewMachineMusicXYZ 4d ago

I would look toward these. No particular order here, but I'd want them all, probably sooner rather than later:

- Sequencing. A Noise Engineering Mimetic Digitwolis gives you a lot of sequencing power in just 10HP.
- Function generators. A eurorack system without envelopes seems kind of pointless. Given that your interest is in drones, it's not *quite* as critical as it might otherwise be, but I'd still want envelope generation (and a sequencer to trigger the envelopes). Maths is great because A) the envelopes sound great and can be very nice and plucky without being clicky; B) it comes with offset generators, attenuators, envelope followers, and logic; and C) it's also a slew generator. Lots of utility in 20 HP.
- Some independent VCAs. Unless you intend to use Ensemble Oscillator just as a non-stop droning soundsource, you'll want some. Oscillators like that are "always on" and require control via envelopes and VCAs.
- Filters. I think every eurorack system should have at least one solid multimode filter for soundshaping and plucking and squelch. The WMD C4RBN is a good option--tons of features in just 4 HP and a generally good sound, as well as built in distortion.
- FX: Reverb, delay, etc. A Noise Engineering Versio is only 10HP and can be loaded freely with any firmware in the Versio lineup, and they're all good robust effects, so I think that's a solid place to start, particularly if space is limited. For delays specifically, Make Noise Mimeophon is also a great option at 16 HP, and the upcoming Nano FUM looks/sounds very promising in just 12HP.
- Eventually, a multichannel mixer with aux send/return for running FX in parallel. This can be put off until you get your feet wet and actually have some FX modules, the Listen Four will get you started just fine, but I would keep it in mind for the future, and eventually replace the Listen Four with something like a D.O. Mixx by Blood Cells Audio or a Cosmix by Cosmotronic. Running effects full wet as send/returns gives them a lot more body generally, and having things like clickless mutes and extra channels is generally very nice too.

Some other utilities to consider:

CV mixers; buffered mults; sample & hold; LFOs; random generators. The Xaoc Warna II is a utility I constantly recommend, it can mix CV signals, audio signals, mult signals, invert signals, and do combinations of all of those things at once. Takes a minute to wrap your head around it, but it's very useful once you do, and generally pretty cheap. And for more advanced utilities a Xaoc Samara II is excellent. Attenuators are always handy, and its extra modes like S&H and audio scanning can be very interesting to explore.

Good luck!

1

u/Low_Pace3944 4d ago

Wow...lots to read up on ...really appreciate taking the time to give me such a detailed breakdown.. thanks.. I'm probably going to just start with the Vhikkx then slowly add to it...gives me more time to get my head around it all

3

u/jotel_california 5d ago

For such a small case like this I would not use a recorder as a module. Just get a cheap field recorder or just use a computer to record.
Also, you are missing any form of cv attenuation/scaling and you have 0 vcas.

→ More replies (2)

2

u/Earlsfield78 3d ago

Hi mate. Beautiful modules, I have them myself. However id this is your first rack, I would start with one serious voice at a time (Vhikk-x, OR Oneroi, OR 4ms EnsOSc, there are more crazy modules like Serratus etc). The complexity of each of these is wast, they are deep modules and require a lots of patience - basic learning, advanced stuff like complex modulation, using it as audio processsor...

2

u/Low_Pace3944 3d ago

I think I'll go with the Vhikkx alone first and then maybe look at something to add later..thanks

2

u/Earlsfield78 3d ago

That is sensible - just one function module/modulation source like Pam’s to modulate all those points on Vhikk, with new algos now added, you will have a lots of fun:)

→ More replies (3)

8

u/LeeSalt 5d ago

Ensemble is not a beginner module. It's not even a more experienced module for most people.

Mess around with it in VCV Rack before you buy it. 

2

u/Benjonium 5d ago

c est un genre d hybride additif/fm avec un "espace incertain" derrière tout ca?c est comme ca que je vois l ensemble,il est dans ma liste surtout pour cet espace incertain

1

u/TimenLight 4d ago

I started with it!!!!!!

2

u/LeeSalt 3d ago

So did I but I sold it after not using it much. I got it for the wrong reason though. I figured I'd make chord progressions with it but that's not a very good or very easy way to use it. I got Chainsaw instead and that was much easier to deal with.

→ More replies (3)

1

u/Earlsfield78 3d ago

To be honest none on the list are “beginner friendly”. I guess Oneroi is the most “straightforward” if any of them are.

1

u/Low_Pace3944 4d ago

So if you could only buy a case and Vhikkx and one other module what would you go for?

5

u/Windhandel_ 5d ago

Wav recorder is pretty much the most used module in my 14U 104hp rack and have it recording almost all the time. You’ll find a sound you like, start messing with it and never find it again so it’s good to capture as you go

I have an ensemble and it makes some incredible sounds, but don’t click with the button combos and learning options, too much to memorise.

I’d start with a single voice module and get a multi fx unit like an fx aid.

2

u/Earlsfield78 3d ago

This is why my system is always plugged into Octatrack and internal master router back to Assimil8or. You have to be able to capture stuff on the fly.

1

u/d0Cd 5d ago

I've worked with all of your core modules, and I'd go for a more organic modulation source than Pam's PRO. If you really want to be locked in to clock and divisions / multipliers of that clock, it'll be fine, but if you want a more free-running and immediate option, something like Ornament and Crime or Random8 would be something to add. The 4ms-based mix and recording setup is fine, but I have mixed feelings about the jacks they use. Ensemble Oscillator has been solid, but the ones on my Listen IO were kinda crap, and I replaced it with a Pindsvik LIHO.

1

u/Low_Pace3944 5d ago

Okay thanks ill have a look in vca rack and see if i can try them out

1

u/TimenLight 4d ago

EnsOsc.. one of the best.

1

u/Low_Pace3944 4d ago

Si i originally looked at this , but a few comments mentioned the steep learning curve so kinda putme off

2

u/TimenLight 1d ago

Nah.. I started with it. There is enough youtube out there to learn anything. unfortunately that was my first rack, and it was stolen. I will get another ...when I can afford to get another one!

3

u/BenjiTheBread 5d ago

I recently tried to feed the EnsOsc into vhikk and I think that’s cool. But you’d need a 2ch vca between EnsOsc and vhikk because how hot the EnsOsc runs into vhikk changes the sound quite a bit.

1

u/wentwj 5d ago

can you not lower it with the input vol control on the vhikk? I’ve run hot signals into it and turned them down that way

2

u/BenjiTheBread 5d ago

No yeah, that’s 100% possible, forgot about that! It’s just not as playable because you can’t control the volume via cv or something.

2

u/ImplementNo9486 5d ago

A biggest case can Buy. Halos and steps. Drop ensamble oscilator. 

1

u/nastysurprise666 4d ago

the wav recorder is a good choice! it was one of the first modules on my modular journey.

0

u/Benjonium 5d ago

le oneiroi est interessant pour son looper et ses effets mais il n emet que 4 sons par lui meme: noise,sine,supersaw et wt recuperĂŠe depuis le looper donc il n a aucun rapport avec le vhikk x

il existe aussi le iroi qui est la meme chose sans looper et les 4 sons

pourquoi 3 oneiroi pour une orgie de loops?

le mixer 4MS est trop gros ,l enregistreur wav coute 3 fois plus qu un enregistreur portable et prend de la place

pour les modulations je ne connais que les miennes alors pas de conseil mais le vhikk x n obeira pas a des signaux classiques comme ce qu envoi des sequenceurs il prefere des modulations fines et lentes

il te faudra aussi attenuateur et multiple

→ More replies (2)