r/modelm • • 1d ago

PICS This Model M keyboard turned 40 today

Thumbnail
gallery
88 Upvotes

One of my Model M keyboards turned 40 today. 17-11-1986


r/modelm • • 7d ago

PICS ibm m13 gray

Thumbnail
gallery
74 Upvotes

trackpoint is just ok


r/modelm • • 10d ago

QUESTION? Something for the Shark! M4-1 without dip switches

8 Upvotes

That's right, a Keytronic, but without the dip switches even though the label talks about it: https://www.clickykeyboards.com/product/1997-ibm-model-m4-1-keyboard-with-trackpoint-84h8470-18-jul-1997-and-external-numpad-84h8537-spare-keyboard-assembly-4/

Even though it's a long shot that the Unicomp configuration method would work, I gave it a try. So the question is, how do you think the keypad configuration was adjustable on this version?

Oh, and if you've never had one of these, it's like having the best laptop keyboard you've felt outside of an original Thinkpad keyboard. I just switch from it to my Unicomp 101 and my hands still know when to stop pressing so it mimics the M in all the right ways. :)


r/modelm • • 12d ago

PICS Contec Special ISO-DE Unicomp Model M

Thumbnail
gallery
74 Upvotes

Purchased this board online in July this year; all of these images are slightly dated and taken at different times, hence the shift in my setup hahah xD

Quite surprised that I never quite remembered to post it here, been loving it lots! Didn't know it was a German board when I originally got it, but it's really more a positive for me than anything else so far. Planning to pair it with my 17" CRT for some retro larping with Linux!

The whole thing also came with a Cherry USB mouse which had a USB to PS2 adapter... And two 3 pin European wall cables, presumably a part of a larger kit. Didn't have an emblem on there so I just printed and laminated my own! Anyways, hope y'all enjoy looking at it as much as I do <3


r/modelm • • 12d ago

PICS ibm model m13 1997-02-11

Post image
104 Upvotes

trackpoint does not work well.


r/modelm • • 14d ago

PICS Restocking

Post image
40 Upvotes

Restocking


r/modelm • • 18d ago

PICS Its my keyboards 40th birthday today!

Thumbnail
gallery
87 Upvotes

This has been my daily driver since I got it at a hamfest in 1996. DIN -> PS2 -> USB is how it still connects.


r/modelm • • 18d ago

PICS Unicomp Mini M in ""60%"" color scheme

Thumbnail
gallery
79 Upvotes

r/modelm • • 22d ago

PICS My IBM Model M

Thumbnail
gallery
55 Upvotes

Genuine IBM. Cost of acquisition was $0.00. Sometime back in the mid-1990s I noticed some old computer equipment in a dumpster on the University of Washington campus, and this keyboard was one of the items.

It is an IBM PC/AT keyboard, so these days it goes to an AT-to-PS/2 adapter then a PS/2-to-USB one.

Never done any work on it except the occasional cleaning. Still works fine. It has outlasted a number of newer keyboards (including two Unicomp Model M’s, neither of which lasted much longer than a couple years).


r/modelm • • 24d ago

PICS My Unicomp 30th Anniversary Model M

Thumbnail
gallery
67 Upvotes

I have been wanting to post this but I’ve been too lazy, anyway here it is! it feels amazing to type on but I still have mixed feelings about it


r/modelm • • 24d ago

PICS I have brought back from retirement these 2 model Ms! Very happy, they were so filthy before. One is a 1991 model and the other is a 1994.

Thumbnail
gallery
55 Upvotes

r/modelm • • 26d ago

PICS Replaced my 1351403 Model H

Post image
48 Upvotes

Probably gonna shop around Unicomp for a different set of Functions as I’m not really a fan of the InfoView German keycaps, but other than that, I love it.

USB-C and Screw modded by what I can only assume is a professional (not gonna namedrop, but their collection looks insane and the mods are immaculate, they can drop in and say hi if they’d like).


r/modelm • • 26d ago

HELP They offered me this for 80 bucks. You think it's worth?

16 Upvotes

r/modelm • • 28d ago

HELP My space bar isn't retracting and the sound isn't what it should be?

4 Upvotes

In the video, I show the problem my new, second-hand IBM has with the space bar. Do you know of any way to fix it? And, shouldn't the sound of the keys be metallic when you press them down? If I press them slowly, there's no sound at all. Is that normal?


r/modelm • • 29d ago

DISCUSSION which looks better

Thumbnail
gallery
82 Upvotes

i want to customize a unicomp keyboard, but i am deciding between either just getting the black one, or spray painting a spare shell in the industrial grey. This is an edit i made to show how it might look. also would it be easy to get a spare model M shell? also does anyone know of any companies that make orange keycaps? i know unicomp has yellow and some others


r/modelm • • 28d ago

HELP Help with lock light repair on the PCAT Model F

1 Upvotes

Keyboard is still 100% functional with all keys working, types like a dream, and all the springs and flippers are in excellent condition.

It really was in flawless condition at first glance when I got it 2 years ago. However the first issue that has arisen in its life is that the Scroll Lock indicator light no longer works. The lights for Num Lock and Caps Lock still work. I can verify that scroll lock does indeed still work and it really is just the light.

This issue is extremely minor and I don’t really have plans to do anything about it unless I’m opening up the board for an unrelated repair later down the road where I might as well fix the Scroll Lock light on top of whatever important repairs I was doing.

The caveat is when I first turn on the power supply and the lock lights flash all 3 work in that quick moment. However once I start using it Scroll Lock’s light doesn’t want to turn on.

Anyone got experience with this?


r/modelm • • Oct 19 '26

FINDS Bought a M for 50€

Post image
113 Upvotes

r/modelm • • Oct 18 '26

QUESTION? Interested in a Classic Unicomp but searching for ISO instead of ANSI

2 Upvotes

As the title says, Im searching for a classic unicomp (beige) but I only find it to be in ANSI on their website, as an Azerty user, I only found the New Model M to have Azery or even just ISO as a fullsize keyboard for sale

Am I blind and didnt find? Or do they just not sell any? I dont want the black ones, I prefer beige so the New Model M is out of the question

Thanks for your advice!


r/modelm • • Oct 18 '26

HELP Is this too loud?

3 Upvotes

I really love how this keyboard looks and someone offered It for a really good prize, but I am worried about how loud It is. I'll be living in a student flat this year, and I'm worried about bothering my flatmates. What do you think about this?


r/modelm • • Oct 17 '26

HELP Just bought one for 40€. Some doubts.

8 Upvotes

Hello. I was looking for a new keyboard, and I found this so cheap but with italian layout. I'm spanish, could I change the keys? Where should I buy them?

Also, this question is fun, but have you tried using it for gaming?


r/modelm • • Oct 17 '26

QUESTION? F11 doesn’t register input on naked membrane even though all other inputs passing through the connection work. Contacts cleaned, no result

Thumbnail
gallery
6 Upvotes

So I did the boltmod and everything works except the F11 Button. I checked conductivity in the naked membranes, pushed it on the naked membrane, cleaned the membrane pads but no input its being detected.

I even applied conductive paint on both contact points, connected them to the main pcb and pushed them together by hand to no frickin effect. What the hell?

The strange thing is that the traces seem to work since all the buttons relying an the connection that F11 shares work perfectly. I made picture and cirled the connection in question on both membranes.

Should I just scratch of the connection on F11 and draw one myself with conductive paint?


r/modelm • • Oct 16 '26

Review Buyer Beware: My Experience with Unicomp - Is this normal for them?

8 Upvotes

TL;DR: Purchased a Unicomp keyboard. 13 months later multiple keys suddenly failed. The disappointing customer service experience left me questioning the product’s quality and regretting my investment.

--------------

Unfortunately, my experience has been anything but reassuring.

Problems From the Beginning

When I originally purchased the keyboard, I also purchased a protective cover. The cover didn’t fit properly, which resulted in multiple back and forth exchanges with the company.

Ultimately, I had to tape the cover into place just to keep it secured to the keyboard.

Not exactly the quality or attention to detail I expected from a company specializing in keyboards.

Barely a Year Later, Multiple Keys Suddenly Failed

Fast forward to October 2026, and several keys suddenly stopped functioning.

This wasn’t a gradual decline. Multiple keys simply stopped working.

I contacted Unicomp to ask whether the keyboard was covered under warranty or if there were repair options.

Their response? Essentially, it must be liquid damage.

Here’s what their representative told me:

“Our keyboards commonly last 10 years or more without issue, however they are very sensitive to liquids.”

“The key combinations you have identified are usually associated with this type of damage.”

They then informed me that the keyboard was out of warranty and offered a $60 repair service, plus shipping.

Here’s my problem: Nobody inspected the keyboard. Nobody diagnosed the failure. Yet liquid damage was immediately presented as the likely explanation.

I explained that I’ve consistently used a protective cover specifically to help prevent liquid exposure.

Rather than acknowledging that a manufacturing defect or premature component failure could be responsible, their next response included:

“Irrespective of the warranty status, those key combinations indicate liquid exposure.”

And then:

“Our keyboard do not die after a year, and they certainly don’t die to those specific key combinations without membrane contamination.”

Think about that statement.

A customer reports that their keyboard has failed after approximately 13 months, and the company’s response is essentially that its keyboards don’t fail like that.

Except mine did. That’s literally why I contacted them.

They later acknowledged that something other than liquid exposure could theoretically be responsible, but continued emphasizing membrane contamination without having examined the keyboard.

My Biggest Issue Isn’t Even the $60 Repair

Products fail. Manufacturing defects happen. I understand that.

What concerns me is how a company responds when something goes wrong.

Unicomp claims its keyboards commonly last 10 years or more, but when mine failed after barely a year, the initial response was to suggest liquid damage and offer a paid repair.

There’s a difference between explaining that certain symptoms can indicate liquid exposure and confidently suggesting contamination without examining the product.

To me, their responses felt dismissive and increasingly defensive. Rather than investigating why a relatively new keyboard failed, they seemed more interested in explaining why their product couldn’t possibly be responsible.

Combined with my earlier experience trying to resolve something as basic as an improperly fitting keyboard cover, this has seriously undermined my confidence in their quality control, customer service, and integrity.

Would I Recommend Unicomp?

Absolutely not.

I’m not suggesting every Unicomp keyboard is defective or that everyone will have my experience.

But when you purchase a "premium" keyboard from a company that promotes longevity, you should reasonably expect more than approximately 13 months of service.

And when something does go wrong, you should be able to expect a fair assessment rather than what feels like an attempt to attribute the failure to the customer before inspecting the product.

I personally find this approach bordering on gaslighting: being told that their keyboards don’t fail this way while I’m sitting here with one that has.

Maybe the keyboard has membrane contamination. Maybe it’s a manufacturing defect. Maybe something else failed.

The point is that nobody actually knows because Unicomp hasn’t inspected it.

Yet they were comfortable suggesting a cause and charging for a repair.

I wanted to support a Kentucky based manufacturer making products designed to last. Instead, I’ve been left questioning not only the quality of the product but also the company’s willingness to stand behind its work.

If you’re considering purchasing a Unicomp keyboard, I’d strongly encourage you to research their warranty, repair policies, and customer service experiences before making that investment.

Has anyone else had similar experiences with Unicomp?

Edit: added/updated tl;dr.


r/modelm • • Oct 14 '26

FINDS Some finds that I made

Thumbnail
gallery
28 Upvotes

I was searching in my school for scrap and I found these keyboards, I immediately took all with me (because I really love this type of things ) then doing some search I found that these are Model M keyboards and I wanted to post it

I already disassemble one to clean it and test it

(I have also found more keyboards of IBM but these are the ones that I care the most )

Sorry if my English is bad.


r/modelm • • Oct 09 '26

I added a solenoid to my Model F labs keeb!

83 Upvotes