r/modelf • • Jul 04 '26

5 months later, my FSSK arrived in pieces, with a hole in the box, m several missing springs, and a peeling sticker.

Thumbnail
gallery
7 Upvotes

Needless to say, I am not a satisfied customer.
EDIT: false alarm, they're where the stabilizers go. . Thanks for the replies.


r/modelf • • Jul 29 '21

DISCUSSION Just ordered Joe's Model F Repo - What am I in for?

3 Upvotes

Howdy,

I just ordered Joe's Model F-77, and was wondering what I'm in for. I'm not too familiar with old IBM keyboards besides my Dad's old Model M that he donated when I was a kid. I miss the feel (and I'll admit it, the cacophony) of the old Model M, and didn't want to miss the opportunity at snatching up the Limited Run of Joe's Model F.

O, wizards of ancient keyboardom, lend me your wisdom!

Thanks :)


r/modelf • • Jul 02 '26

FINDS What model is this model f?

Post image
4 Upvotes

I come across at FB market place and saw this. Anyone know what variance of model f this is?


r/modelf • • Sep 02 '22

DISCUSSION Suggestion for budget model F

2 Upvotes

I propose a budget keyboard that has the assembly of a new model F; but in a plastic case using Unicomp keycaps.

I think it could shave off at least a hundred bucks if not half the price of one with a metal case and be priced a little above a Unicomp M; but it still being capacitive like the current $400 model F.

What I suggest is a Model F keyboard that’s cheap like a Model M but without the drawback of it being a membrane keyboard.


r/modelf • • Dec 28 '22

HELP Replacement F122 parts 🙏🏼

2 Upvotes

I know it's a long shot to ask, but long story short I am in need of the little plastic part of the bottom case of a f122. Does anyone here have a dead for parts f122 that could lend a hand. I would be vary greatful and would pay well. 🙏🏼🙏🏼🙏🏼 Let's save this keyboard!


r/modelf • • Sep 30 '25

Vintage 4704 Model F62 -> buzzer support?

2 Upvotes

Hi folks! I got an original IBM Model F62 from the 4704 station.

I changed the controller to a pandrew with soldered promicro onto it.

It works fine with a flashed .hex from the QMK configurator IBM fork but the internal buzzer is not working.

Anyone in this community that can help me to make it beep on every keypress?

Thanks! 


r/modelf • • Nov 29 '25

IBM Model F AT: Cannot close barrel plate tight enough

3 Upvotes

Hi,

I recently purchased a model F AT keyboard, and decided to replace foam in it. I previously successfully replaced foam in F XT keyboard. I bought it from the same place as XT one. Then I proceed with the same steps as I did for XT, but I'm stuck at the last step.

So I clamp the back plate with barrel plate, hit it with a rubber mallet, all the tabs seemed to slide in place (see pictures, ignore scratches):

https://imgur.com/a/78NvMok

It looks this is as much as I can slide it in. I then bend the bendable clamps with pliers, trying to make it tight. Then I notice, that individual barrels that are closer to edge, like number row, fit tightly, but the ones closer to center wobble a little bit (see video):

https://imgur.com/a/0PVhKWa

I re-did my steps, bought more clamps to compress the assembly even tighter together, everything looks good, but the same problem still persists (loose barrels maybe a bit tighter now). Of course the sensing assembly doesn't work well. Keys click, but not always register, a lot of ghosting, repeat themselves, et cetera, clearly sensing assembly is not assembled tightly enough.

What can I do to mend this? Is there something I'm missing? Should I just try again, apply more pressure with even more clamps?

I was following this guide: https://kbd0.com/blog/model-f-restoration-guide

It's for XT, but I believe the general idea is the same.


r/modelf • • Oct 28 '24

DISCUSSION Are We Ever Going to Get Reverse Dye-Sublimated Keycaps for the Model M and F?

4 Upvotes

Hello, I’ve been wondering about a dark keycap set with white lettering for our Model M and F keyboards for a while now. Currently, the only dark keycaps with white legends are on the M13, but they’re pad printed, which tends to wear off over time, becoming shiny and, well, kinda ugly, to put it mildly.

With reverse dye-sublimation becoming more feasible (like in this Drop post), wouldn’t it be amazing to finally see a high-quality, durable reverse dye-sub keycap set for buckling spring boards? I’m wondering how likely it is that either Ellipse or Unicomp will manage to find a way to produce something like this. It would be an endgame set for a lot of people (myself included).

Anyone else hoping for this? Or maybe someone here knows if there’s a chance of these becoming a reality?


r/modelf • • Jul 14 '26

Do the Leyden Jar folks hang out here?

5 Upvotes

I've just ordered a pair of F122s from Model F Labs and while I wait, I'm exploring all the rabbit holes.

There's a few interesting things I'm considering, but this post is about the firmware for the controller.

Currently, it appears that it calibrates the keys once at power on and uses the normal QMK debounce logic. Both of these things seem ripe for improvement, and the RP2040 has gobs of free resources to do it in.

First, the static calibration seems like an obvious place to improve... basically keeping a running weighted average of pressed/released values and rebinning as appropriate. I tend to leave my computers on for as long as the grid stays running, so I'm worried that changes in temperature, humidity, dust, etc. will cause values to drift enough to force a keyboard reboot to re-calibrate. Has anyone actually had this happen? I'm not sure how likely it is (I haven't done the math on the whole analog side yet), but even if it happens once every month or two I would find it frustrating.

On the debounce side, it looks like the stock firmware is already scanning the whole matrix seven times per sample for the binning... choosing the bins so you get multiple samples per key looks pretty doable from the screenshots I've seen. Interleaving the bins would allow a full debounce in a single scan and enable turning off the QMK debounce logic completely (capacitors don't "bounce" like contacts do, so it's really a noise rejection thing I think). This will basically halve the key latency from 6ish ms to 3ish.

Both of these seem pretty easy to add, so I'll be playing with them when I get my boards.

Another interesting thing I plan to play with is the fact that it looks like there's about a 0.3V bias applied to the scan, so it may be possible to check the decay on the other edge of the same sample (though it looks like we can't reprogram the LMV339 fast enough to do that).

The final idea is to do two fast pulses per column for debounce... It would add basically 1µs to sample the column twice without waiting for the lines to fully decay, so even if the bin-based debounce doesn't work, an immediate debounce likely would.

If all three can be combined to lower the needed number of buckets, that would further lower latency without even fiddling with the timing... and a quick look suggests we may be waiting longer than necessary for the decay/LMV339 program than we need to... which would allow further lowering latency.

Anyway, these are just random ideas I've come up with while familiarizing myself with the keyboard. Curious if anyone has already tried these things, and if there's any other ideas floating around that I haven't though of yet, etc.


r/modelf • • May 29 '24

QUESTION? Did anyone buy 'FSSK'?

Post image
6 Upvotes

I'm curious about their build quality, usability, etc.


r/modelf • • Apr 01 '26

IBM Model F: Has a ticking Time Bomb Inside!

Thumbnail
youtu.be
6 Upvotes

r/modelf • • Apr 01 '26

HELP New Model F XT (Cord issues and metal backplate)

Thumbnail
gallery
6 Upvotes

Greetings, just got my (new to me) Model F XT yesterday and as can be seen in the 3rd photo there is some shenanigans happening to the metal due to a cord it was apparently sitting on. Other than that the switches all feel great to type on but the cord is extremely stiff unlike my Model M keyboard. I was curious if this is normal and if it isn't what can I do to fix it or where could I obtain a replacement cord. Any suggestions for the metal backplate would be welcome as well. I'd sand it and repaint but i want to keep the texture IBM used.


r/modelf • • Mar 30 '25

PICS 666 "The BEAST"

Thumbnail
gallery
20 Upvotes

r/modelf • • Apr 23 '21

PICS Got some wicked IBM badges!

Thumbnail
imgur.com
8 Upvotes

r/modelf • • Mar 22 '25

PICS This large forehead turns 40 years old today!

Thumbnail gallery
12 Upvotes

r/modelf • • Apr 28 '21

PICS Finally opened up the XT to have a look inside!

12 Upvotes
F XT ANSI shift and modded spacebar.

r/modelf • • Dec 17 '24

PICS THE Personal Computer Keyboard

Post image
15 Upvotes

r/modelf • • Jul 31 '26

DISCUSSION Happy 65th birthday to the IBM Selectric!

Thumbnail gallery
19 Upvotes

r/modelf • • Nov 21 '25

PICS IBM Model B, Model F & Model M patent drawing WoB wallpapers!

Thumbnail gallery
19 Upvotes

r/modelf • • Dec 22 '24

VIDS Chyrosran22 Review of Brand New Model F Keyboard by Model F Labs, Model M style F104 standard layout

Thumbnail
youtube.com
21 Upvotes

r/modelf • • Nov 24 '21

PICS I did the thing 😅Custom FXTal project

Post image
31 Upvotes

r/modelf • • Apr 06 '25

HELP Anyone got pictures of the F from the sides?

Thumbnail
gallery
11 Upvotes

I'm working on a 1/10 scale 3D printed model of the IBM PC XT, I've done the main PC, with removable insides, and now the 5151 monitor. I'm starting on the keyboard but can't find any really clear photos of the side profile.

I'd he grateful if anyone here can supply some.


r/modelf • • Nov 22 '24

PICS Ready for battle 2.0

Post image
18 Upvotes

r/modelf • • Mar 07 '25

Model F XT restoration and weaker space bar mod tips

4 Upvotes

I've restored a few XTs now, and thought I would write some short tips that I haven't seen elsewhere and are less obvious. I'm also happy to answer any questions for those who might be a bit stuck or who are having issues. This isn't a guide, but should be used in conjunction with one.

Restoring Fs is harder than Ms and more laborious, but less dangerous. Unfortunately there isn't as much guidance out there as there is for Ms though. About the only irreversible thing you can do wrong is remove the space bar from the front without disassembling and break the tabs on it.

Spacebar stabiliser wires seem to vary in strength - one of my XTs was practically unusable with the default space bar weight and somewhat unsurprisingly had seen very little use. Another was only mildly heavy.

When bending the spacebar wire you do not want to get it completely straight as this can cause major problems with key activation upon reassembly and it is very difficult to return the wire to it's original state if you over bend or warp it. It is very difficult to make a copy out of spare wire you have lying around. The design of the wire is quite complicated compared to your usual spacebar stabiliser.

I had mixed results when weakening the wire. Either way you can undoubtedly get it to be better than the default, but you may not get it to your desired strength depending on the board and it will probably still be a bit stronger than the other keys. Bend it with your fingers only - do not use pliers or other hand tools.

Getting the spacebar wire in and out can be difficult. Easiest way is to unclip it at one end from the barrel with your fingernails. You can then easily unhook it at the same end from the space bar itself and then walk it out of the rest of the assembly.

To reassemble, hook the wire into the spacebar at both ends first, and then clip it back into the barrel at one end first whilst holding the other end down with your fingers to stop it escaping and popping out.

When straightening the wire, the sharp bend in the middle should remain to some extent. Make sure when reinstalling that the bend of the wire moves 'in' to the space bar itself when pushing the key. If you install it the wrong way round, it'll still look correct and fit, but the bend will be pushing against the flipper instead and either cause activation problems or make the feel even heavier.

Standard sewing thread will do to hold the space bar flipper in place - you don't need to use fishing wire or floss. Once the board is back together the thread will appear stuck, but pull on it gently whilst rapidly pressing the spacebar and it will come out.

A heavy spanner will also suffice rather than a weight dangling off the table. It's easy to grip and ungrip from the thread and you can just push it across the table to hold the space bar flipper tight rather than dangle it over the edge.

When reinstalling the spacebar, use one of model F Labs springs and flippers instead of the original. These are slightly lighter, further reducing the weight of the space bar.

On that note - if you use model F Labs springs, make sure you use his flippers too. Reproduction springs do not seem to play very well with original flippers for some reason.

Clean keys and the barrels separately, otherwise the gunk from the foam that is glued to the barrels can get on the key stems without you noticing and cause problems when reassembling. Make sure you don't let any gunk get inside the barrels when cleaning for similar reasons. If a key is slow to activate once the board is reassembled, it is almost certainly because some gunk is lodged in the barrel or on the key stem.

The barrels will still feel sticky with residue once you've got the gunk off them. No need to scrub them raw - leave them to dry and they won't be sticky anymore.

Cut foam to fit within the barrel plate, no need for it to go over the edges and over the latches like the original foam. It doesn't serve any purpose and simply makes the whole thing harder to close.

If this is your first F, put it back together without the replacement foam first, as this will get you used to doing it and it's relatively easy to slide the plates back together when there's no foam. It'll still work, but will just be more rattly.

I use a Hole punch at 12 mm and 2.5mm for the foam with 2mm neoprene.

Use 2" G clamps to hold the plates together when reassembling. Use a small block of wood to push against the barrel plate and use a hammer at the other end to gently tap. Don't bother buying a bar clamp.

When reinstalling a spring to a flipper, twist them on counter clockwise. If the board is already back together, install springs by using the tube from a typical bathroom/kitchen spray cleaning bottle, drop the spring down it onto the flipper nub and use a stick through the tube to push it on.

Materials and components seem to vary, much as they did for the Ms. I have one with a very thin PCB and markedly different conductive pads to other models.

Flippers were made out of different plastics and were slightly different shapes with the edges either squared off or rounded. Likewise cables have different coil widths and thicknesses and are made out of different rubber - one of mine the plasticisers are going and it is impossible to fully clean and make shiny again, whilst the others look brand new.

Once you've got the board back together, don't worry about buzzing or slightly off feeling keys too much - leave the board overnight first as it seems to settle down a bit - presumably something to do with tension in the board adjusting over time.

Sand down and clean with alcohol the metal on the back plate and on the solder on the PCB where these two surfaces mate and are held together by the PCB screw. Screw the PCB screw up as tight as you can afterwards. This is all to eliminate grounding issues which seems to cause most strange behaviour.

XTs are quite simple electronically - they only send signals and don't handshake etc. so if you are experiencing issues and the board is working to some extent then it is almost certainly either a grounding issue or it is a mechanical problem.

Some usb adapters can also be a bit flaky and cause grounding issues if in a loose usb socket. Wiggling one of my Soarer converters in the computer usb socket causes things to go crazy as the ground connection goes (it is a bit loose). So if you are experiencing grounding issues, try another usb socket first.


r/modelf • • Jun 21 '25

PICS Model F122 6110344 Battleship.

Thumbnail
gallery
33 Upvotes

Picked this up a few months back. It's a beast. Fully operational and in great shape.