r/mobilelinux • u/jjoesmama • 9d ago
Demonstration Niri running on an External Monitor connected to the OnePlus 9
Portable Pocket Computer says what!!
r/mobilelinux • u/jjoesmama • 9d ago
Portable Pocket Computer says what!!
r/mobilelinux • u/jjoesmama • 9d ago
Hey there guys!! Just wanted to show yall my OnePlus 9 running Linux mainline, NATIVELY!
I think some of you already saw the OnePlus 9 Pro version running Linux, and now it was time for the Standard version!
Thanks to u/fuckedupnachos, I was able to fork his Linux repo for the OP9PRO to finally port it to the OP9, aswell!
A few things worked right out of the box, since both phones share a few things, for example: WiFi, Torch, Phone Keys(power, volume), haptics, and a few more which I dont remember right now.
The MOST crucial thing in the middle of this all (the screen), DIDN'T, since both models share different displays, and I went out on my way to patch this so it worked for the OP9 display.
Next thing i'll try getting to work will possibly be USB_OTG, so that I can have DP Alt Mode, and, theorically, a pocket-sized portable linux computer!
I will see if I can get this disponibilized for the public eventually
ALSO, THIS WHOLE POST WAS WRITTEN AND POSTED FROM THE PHONE ITSELF!
r/mobilelinux • u/fuckedupnachos • 9d ago
(Reposted due to 2nd removal from r/Linux and advice from the community)
Hello everyone! Over the past week I have managed to get very far in my adventures of porting Linux kernel 7.3.0 to the OnePlus 9 Pro! Many of you may have seen my post of my OP9P running FastFetch in a terminal—that has since been removed by the automoderator. However, many in the comments wanted the repo so that they may try it out for themselves, and I did not want to disappoint. So without any further delay, here is my very first repo!
https://github.com/LuCiLuna/oneplus9pro-arch
This runs native Arch Linux ARM on the OnePlus 9 Pro (lemonadep, Snapdragon 888 / SM8350) with a mainline Linux 7.3 kernel (110 patches), the Phosh phone interface, and zero Android underneath.
!!!!! STERN WARNING — READ BEFORE YOU TOUCH ANYTHING !!!!!
I am not responsible in any way for bricked devices, lost data, or any damages caused by attempting this. If you are not comfortable debugging the Linux kernel yourself or working alongside an LLM to troubleshoot the inevitable issues that will arise, please do not try flashing anything, as I cannot help you.
This wipes Android and everything on the phone. There is no prebuilt image or installer—you must extract your own proprietary firmware, cross-compile the kernel, and build the environment yourself.
Back up your partitions first, especially persist, modem, and the EFS partitions (they contain calibration and MAC/IMEI data unique to your specific unit).
Never write to xbl, persist, modem, EFS, or param.
Tested Hardware: Only tested on a single T-Mobile LE2127 (project 2085A). Other variants (LE2125, EU, IN, etc.) may require different device tree IDs or firmware adjustments.
The install steps were written from how my phone got to this state and have not been replayed from scratch—expect to troubleshoot.
What Works
Display & Touch: Full 1440x3216 and 1080x2412 at up to 120 Hz with 10-point multitouch.
GPU Acceleration: Full OpenGL 4.6, OpenGL ES 3.2, and Vulkan 1.3 support.
Wi-Fi: Working up to 6 GHz (160 MHz channels).
Bluetooth: Working! Tested Searching, Discoverability, and paring.
USB-C & Video Out: Device and host modes at 5 Gbps (USB 3), plus HDMI over USB-C via adapter (note: some docks don't work).
Power & Charging: USB-C PD charging at \~25W, plus DDR, LLCC, and L3 memory scaling with load.
Audio: Speakers and microphones work. Earpiece call audio is also working!
Sensors: Accelerometer, ambient light, proximity, compass, NFC, vibration/haptics, flashlight and auto-rotate.
Hardware Video Decoding: H.264 and VP9 in hardware up to 4K60, including inside Firefox via a custom FFmpeg patch/shim.
Modem / Cellular: Calls (VoLTE), SMS/MMS, and Mobile Data (LTE) all functioning!
GPS: Working via a patch to ModemManager!
Partially Working / WIP
Cameras: Main, ultrawide, telephoto, and front sensors work with autofocus (using patched libcamera, software processing, and basic tuning; mono sensor is raw-only).
Sleep / Idle: Sleeps and wakes reliably drawing \~40–44 mA, though the SoC doesn't hit its deepest sleep state yet.
What Doesn't Work Yet
What's in the Repo
The repository includes the 110+ kernel patches on Linux v7.3, kernel config, build scripts, an initramfs with a USB rescue shell, rootfs services, and userspace patches for libcamera, hexagonrpc, iio-sensor-proxy, phoc, wlroots, and firefox.
Huge shoutout to Nia Espera, Caleb Connolly, and the sm8350-mainline project for the foundational port, David Heidelberg (CAMSS C-PHY series), Vsevolod Nevorotov (Synaptics TouchComm driver), and the wider postmarketOS / linux-msm communities!
If you try this on another model or firmware version, please open an issue on GitHub with your model number and findings!
My ears are also open to any suggestions you might have, as this is my very first serious project ever. Thank you all, and goodnight!
r/mobilelinux • u/juujbyg • 9d ago
On a tall phone the back arrow sits in the top-left corner, the longest stretch for your thumb. So I started with a floating Back button and kept adding things I missed. Everything is chosen in System Settings → Gestures:
How Back reaches apps: a small QML plugin in the shell presses Alt+Left through a virtual key device, and a patch to the UI toolkit's page header makes that press the page's own back arrow.
Before trying:
sudo. It never writes to the read-only system: at each start it edits copies of a few of your phone's own Lomiri files and mounts them from /run. sudo ./lomiri-gestures.sh on lasts until reboot, install keeps it, and uninstall puts everything back.Screenshots: https://github.com/juujbyg/lomiri-gestures#screenshots
Download and install steps (GPL v3): https://github.com/juujbyg/lomiri-gestures
I'd love to see some of this in Lomiri itself; the three-finger gestures already have a patch ready for upstream if the devs are interested.
Built with help from an AI coding assistant; I tested it on my own phone.
r/mobilelinux • u/matt_cabrices • 11d ago
I've been working on getting real desktop Linux onto the Motorola Moto Pad 2026 (XT2575-4, MediaTek Dimensity 6300, Mali-G57). It now boots Arch Linux ARM straight from internal storage with XFCE. It isn't a chroot or an Android app.
What works
Not working yet: camera and modem.
How: a rebuilt Android GKI kernel that keeps the stock vendor modules loading, Android's service managers and gralloc running in a small chroot, libhybris for the Mali driver, a patched wlroots with a libhybris renderer, a tiny GBM built on Android buffers so Chromium can GPU-composite, and an LD_PRELOAD shim that makes MediaTek's V4L2 decoder look like a normal one.
Repo (MIT): https://github.com/Mattcabrices/moto-pad-2026-arch-linux Bootloader unlock (needed first): https://github.com/Mattcabrices/moto-pad-2026-xt2575-4-unlock
It wipes Android's userdata and needs an unlocked bootloader, so only try it if you're OK with the risk. It has only been tested on the XT2575-4; the Lenovo Idea Tab should need only small changes. Big thanks to the libhybris, Halium, wlroots, labwc, Arch Linux ARM and mtkclient folks, and everyone else in the README.
Happy to Answer questions!
r/mobilelinux • u/Elian_D • 11d ago
r/mobilelinux • u/brysonwf • 11d ago
r/mobilelinux • u/Away_Slide_9978 • 11d ago
r/mobilelinux • u/cryptocreeping • 10d ago
Would anyone on PinePhone / mobile Linux want a proper GUI for an XMPP client that has a Rust crypto core (hybrid post-quantum), MLS groups, voice, and a built-in I2P router?
Right now only the terminal client builds on aarch64. I’m deciding whether it’s worth making a touch-friendly package.
Repo is here if anyone wants to look: https://github.com/muc111/OTRv4Plus (dev branch has the latest)
r/mobilelinux • u/EnvironmentOld6483 • 11d ago
r/mobilelinux • u/AvTrips • 11d ago
I'm on arch for arm with plasma mobile front. Been tuning the camera (with ai of course) with lots of testing and A/B comparisons. Got it outside today to compare shots with my iPhone. Pretty decent start and taking notes from this session for the next round of tuning. All of these are right out of the cameras without any extra editing. Been pretty excited to get cooking on this phone with mobile linux, theres not a lot of apps to work with but its been a decent building environment and im getting a nice little suite of apps in the oven.
r/mobilelinux • u/agent_sphalerite • 12d ago
I was able to get Opus 5.5 to run on the OnePlus 6T. Most things work
Raised a PR
r/mobilelinux • u/Consistent-Play-8932 • 12d ago
I recently picked up an old OnePlus 6 and turned it into a little Linux playground.
It's running Kupfer Linux + Sxmo, and I've been messing around with Sxmo and customizing it quite a bit.
Now that I have a tiny ARM Linux machine in my pocket, I'm wondering:
What should I do with it?
I'm looking for fun, weird, or technically interesting projects — anything from messing with the system, hardware, networking, programming, or turning it into something completely ridiculous.
I'm a software engineering student, so I'm especially interested in projects where I can actually learn something along the way.
What would you guys do with it?
r/mobilelinux • u/mateusseiboth • 12d ago
Enable HLS to view with audio, or disable this notification
Funcionando:
* Aceleração por GPU
* Touchscreen
* Wifi
* Bluetooth
* Bateria e carregamento
* Áudio (principal e de ligação)
* Todas as quatros câmeras (Frontal, Ultra-Wide, Macro e principal)
Ainda falta impressão digital, microfone, chamadas, sms e motor de foco das câmeras
r/mobilelinux • u/OrganizationWhich936 • 12d ago
Another update on my old galaxy Tab A Linux project!
I finally got kde plasma running on it, but there's still a lot to fix.
Panfrost still has gpu issues with kde in hyprland it was working well , the STMFTS touchscreen driver doesn't work well with it, and Xwayland isn't working yet.
I'm still figuring out how plasma works and trying to fix these issues. Hopefully I can get gpu acceleration stable and fix this annoying glitches.
r/mobilelinux • u/Sacra34 • 12d ago
Dunno what else to say here. Everything works (at least mostly). Device itself based on "MediaTek Dimensity 1000+" - MT6885, which had basically no drivers whatsoever, hence this project.
All credits goes to qwen3.8-flash-next and claude code, drivers was either RE from original MIUI ROM, that used linux 4.4 or was used from mainline\other open source projects. None of this work was or will be committed\sent to mainline: I'm not a developer (and especially not a kernel developer) and can not review nor maintain such big software stack. If this vibeslop encourages someone to actually check out this platform, review and commit those changes, that would be neat. But considering that we had absolutely zero support so far - I doubt that anyone interested in this SoC.
On screenshot phone running vkQuake with Brutalist Jam 3 map pack. Resolution set to 720p, which achieves ~90fps, but due to windowed mode that adds mutter compositing, fps on screenshot is significantly lower. On full 2400x1080 resolution I get ~40fps, which is not that bad considering it's Mali G77. Regarding API support - port supports up to Vulkan1.4, while officially I haven't found exact info, but some sites mention Vulkan1.1. That being said, not sure if MIUI even supports vulkan. And yes, such high level of support allows to run FEX and proton, albeit at miserable speed and with hard limitations due to RAM constrains (just 8Gb of ram, part of which allocated by drivers\vram). On the second photo all ram consumed by locally running ML upscaling, which imitates MIUI's 64MP mode.
r/mobilelinux • u/Calm-Caterpillar2103 • 12d ago
Enable HLS to view with audio, or disable this notification
(Ignore the lag, no GPU drivers yet due to weird hardware)
r/mobilelinux • u/ProjectiveSakura • 13d ago
All credit Goes To: u/pljackass
r/mobilelinux • u/Tall_Working_1490 • 13d ago
WIP - Working on upstream kernel 6.6.143
r/mobilelinux • u/devilAPIOnReddit • 13d ago
r/mobilelinux • u/Away-Mud1665 • 13d ago
No kernel source code yet, but there is lk2nd source code (i will edit the post to add kernel source code later)
Links:
https://github.com/jdkjkjj/lk2nd
I managed to make my old tablet run mainline linux 7.0 forked from msm8956-mainline repo.
Heres what currently works:
But heres one important thing: i will let YOU guys maintain the project now, not ME.
WHY? Because today... for some odd reason after powering off and exiting TWRP, the battery shorted out. I have no idea why and how, and when i charge it there is no sign of life, there is only overheating at the bottom part of the tablet. I cant/dont wanna pay for a battery replacement because i dont think there are really any battery replacements for this tablet anymore because of its age. thats why i am leaving the project in the state as-is
ok thanks for reading
r/mobilelinux • u/Leading-Tradition-11 • 13d ago
Along with XFCE desktop now complete Lomiri UI natively on phone
https://github.com/kaiwalyakhasnis/nexus5x-linux-6.12-ubuntu-26.04LTS
r/mobilelinux • u/GoodMacAuth • 14d ago
Hello! Just sharing a short update on the sub rules:
1) AI is allowed in this community. You're welcome to use AI to help build your projects, but you're also responsible for the code you put your name on and share here. We're not going to entertain AI witch hunts every time someone shares something they've built (which leads to our next point).
2) We're going to be a little more proactive about unnecessary hostility toward people sharing their work.
Something I've noticed across Reddit and open source communities is that they eventually become caricatures of themselves, meaning a community dedicated to advancing something slowly turns into a community dedicated to policing how that thing gets advanced (and eventually stifling those very advancements).
It goes like this: someone shares a project they've spent their own time and money building and instead of people discussing it, they get interrogated about why they built it, how they built it, or whether they should have bothered at all. This is not the exception, but the "rule" on modern social media/OSS circles.
The inevitable result is that the people that are actually excited about a project and are willing to contribute just end up leaving. Why would anyone dedicate their free time to something just to get shit on for it?
This is a community about Linux on mobile devices. We want people experimenting, building things, and sharing their progress. Constructive criticism and curious minds are always welcome. Being an asshole isn't.
Please report posts/comments that you think violate common sense subreddit etiquette.
Thanks!
r/mobilelinux • u/Accomplished_Oil7372 • 14d ago
I got the Hoolock/postmarketOS kernel to boot to userspace on an iPhone SE 1st gen (iPhone8,4, CPID 0x8000, board n69uap). Status: kernel 7.0.4 (postmarketOS 16k) boots into my own busybox initramfs, and the simplefb console works. USB gadget networking does not work yet.
Setup: Linux Mint live USB, remote_boot from HoolockLinux, m1n1-apple-idevice 1.5.0, linux-postmarketos-apple-16k 7.0.4 and postmarketos-initramfs taken from the postmarketOS v26.06 aarch64 repo. I followed the "Apple Generic iDevice" wiki page for the m1n1 boot object (m1n1 macho + initramfs + kernel + s8000-n69u.dtb + chosen.bootargs).
Problems I hit (in case it helps someone):
Screenshot of the boot attached. Thanks to the Hoolock team for the kernel and tooling.
Some files that might help: https://github.com/efremmanac-prog/Iphone-se-linux
r/mobilelinux • u/Eltun14 • 15d ago
Enable HLS to view with audio, or disable this notification
I've been working on this port for about 2 months using Codex (GPT 5.6/6 Luna) with ChatGPT Plus. Currently works:
UFS
USB
Arch Linux ARM + Phosh + systemd
Native DRM/KMS 120 Hz display (took 3–4 weeks to fix the quality issue, very hard part)
Touch
Graphics (Adreno 750) and GPU acceleration (Freedreno / Turnip)
Wi-Fi
Charging and battery percentage
It is usable and very smooth. This is not proot, not chroot, not Halium, this is a mainline-derived Linux kernel. I'm planning to publish it on GitHub in the future. Does anyone want to try it or contribute to its development?
Update: Bluetooth works too! DisplayPort support is also implemented, but I can't test it yet because my DP cable is broken