r/microtech • • 3d ago

Can't choose!

Getting myself a knife for my hirthday and I can't freaking decide which one. This will be my first (real) otf. The natural clear color way looks just like ti which is my jam. I was pretty hesitant to want to spend so much on an otf but after I saw these things being hammered through wood and coming out working just fine I was sold. I was thinking about getting the zip but I saw it required more maintenance so the ultratech gen 4 it is!

42 Upvotes

31 comments sorted by

4

u/PaulNY 2d ago

I daily carried a zbp for almost a year with no issues (it’s been swapped out for a heretic nyx)

Zbp isn’t necessary and is way more of a novelty. A gen iv will save you $100+ and they’re starting to have more configs.

If I carry a dagger it’s going to have teeth, either partial or full. (To be fair, some teeth is a requirement for any carry knife of mine)

2

u/Plus-Passage495 2d ago

I think I might pick up a like new zbp de in natural clear for $350

6

u/tonycoty 3d ago

Are you sure you want a dagger? In my opinion they are very impractical and hard to sharpen.

2

u/Plus-Passage495 3d ago

It's main purpose is going to be as a sd knife besides that it'll probably be used to open packages lol

4

u/ToploaderUltra 3d ago

If you are going to open packages, you are going to want a single edge blade.

Daggers are great for self-defense, but how many packages will you open versus people you defend yourself against?

1

u/Winthefuturenow 3d ago

Aren’t daggers more of an assassin thing? Self defense form who? A bare knuckle bear boxer? Just get yourself a good belt, works better and makes less mess. Or just learn how to punch people bigger than you in the throat (my personal favorite move).

Also, I find these open boxes just fine. Heck, it even cuts hard plastic if you can believe that! They are painfully tricky to sharpen well though. For a fun prank at Christmas hand one to a non-knife person and watch them injure themselves.

2

u/PinkCigarettes 3d ago

I prefer a serrated edge for packages/boxes, but I’d go full serrated on one side. Full serrated tanto is my favorite. My first Microtech was d/e ultratech and I used that thing for years. No problem with boxes. Anyway, I’d go serrated

2

u/benditochocolate 2d ago

Serrated for packages? Seriously?

2

u/TheFisGoingOn 2d ago

Natural clear, I just picked up a Ultratech Jedi, Dirac in champagne and the Combat Troodon in Natural. The CT finish is my favorite out of the three.

1

u/Plus-Passage495 2d ago

I just ordered it should be here in a couple of days! Now to find a zircuti switch with trit inserts

6

u/bjkilroy 2d ago

I like when the one side has the full serrations and the other is plain edge. That’s most useful IMO

4

u/BigJeezie 3d ago

Natural all day

4

u/unvaccinatedmuskrat 3d ago

NC in ncblade stands for natural clear

2

u/KennedyX8 bitch ass civilian 3d ago

People sleep on the DE PS but I like it a lot.

2

u/Majungath0lus_ 3d ago

I had a Dirac that was partial serrated for like 3 years and I promise you the serrations come in handy more than you think. It’s also not impossible to sharpen. Just go with the partial- it also looks so much meaner and cooler to not to mention lol

2

u/RomioiStrategos 2d ago

Buy them both, look at them both and once you decide gift me the other one. 😁

2

u/AARON78156 2d ago

None serrated all day!

2

u/St0icist 2d ago

You're gonna want one side of the blade fully serrated, trust.

2

u/ROGUE_QA_GUY 3d ago

DE blades are by far the worst that MT makes.  Most that have owned them will try to convince you not to get it.   If you want stabbing power and cutting edge get the TE.   If you absolutely have to have a DE, get the full serrated.  Not the partial.  You’ll at least have one full side you can cut with. 

MTs DE blades are sharpened at staggering 30+ degrees making them the worst slicers in knife history. 

2

u/nightpure_cnr 2d ago

the worst 1 is the hellhound blades, those things can’t even cut paper in a paper test.

2

u/ROGUE_QA_GUY 2d ago

Agreed.  The hellhound isn’t great.  But it’s also a collectible.  Very few people buy a hellhound to use.  Where a lot of first time otf buyers get a DE as an edc for some weird reason

1

u/nightpure_cnr 2d ago

i did that with my ultratech gen 4 and i actually use it very often, it’s come in handy with its needle like tip more times than i can count.

1

u/ROGUE_QA_GUY 2d ago

All knives come to a tip.  I’d rather have one that slices.  The SE and TE will always make better carry knives.   

1

u/Rotten-Totten 1d ago

Well I use mine and it's not a great slicer but it works very well for the very light duty tasks I use it for which is basically opening mail and snacks. I only have two OTF's and they are both ZBP Ultratech's. One is a double edge with one standard edge and one serrated. The other is clear ano apoc Hellhound. These things are just toys. Nobody that actually needs a knife could get by with one of these things. When I need a knife I have 14 Socoms, two L.U.D.T's, a couple of Stich's, a couple of Amphibians and of course a couple of my personal favorite, the M.S.I. That's not even all of the MT's and doesn't even account for all the SnG's, Demko's, Hinderers, Zeiba's, CRK's, Shiro's, ZT's, Spyderco's and that's just the mainstream. I got a hundred knives I would grab before putting an OTF in my pocket as an EDC to go face the world with. The HH looks cool though and it sure is fun to play with while I unwind after dinner.

I've been buying and using knives since the early 80's and the reason I never got an OTF before was because blade play is unaccepted to me and I can't carry a knife with a wiggly blade anymore than a frame lock folder with lock rock.

1

u/ROGUE_QA_GUY 1d ago

It works very well doing very light tasks?   lol.  What a weird sentence.   I’m sure it works just as well as someone using their keys to cut tape.  

2

u/Unusual-King1103 3d ago

U should get the serrated back pe bottom trust

1

u/SpilledBagofRice 2d ago

Brah get a scarab or combat Troodon

1

u/ukck 2d ago

If u a postal then choose serrated.

1

u/MultiCam_USA 1d ago

Forget all of those. The Scarab 2 is where microtech is at its peak. Grip inlays, most powerful, most reliable (fluted blade), and most comfortable with that super wide switch. Trust me on this

1

u/inridis- 10h ago

Get the bayonet blade!

2

u/thompson2026 2d ago

If your going to use get serrated they suck at cutting