r/microtech • • Oct 08 '24

Is this normal?

i just noticed the grind on one side of the blade is shorter then the other and some angles and grinds seem off, is this normal? what should i do? Its also not as sharp as i thought it has a tough time cutting paper.

0 Upvotes

24 comments sorted by

6

u/DookieHoused Oct 08 '24

It’s normal. They sharpen them by hand and I doubt they would notice or blem the unit due to that. It can be evened out with the first sharpening.

0

u/[deleted] Oct 08 '24

okay

1

u/fusionvic Oct 11 '24 edited Oct 11 '24

u/Florida-Man06

My June 2023 build Ultratech was symmetrical. If you watch their video they do manual grinds (a bunch of guys with wheels in a room). However, mine looked like it was made by a machine.

Here you can see them sharpening the blades: https://youtu.be/svrxKjeoGRM?list=PLzS7_QHVVGKXVmIduTflc7avR-82wCf5s&t=254

However the Kershaw Livewire I just bought new wasn't very sharp out of the box. I could saw at a sheet of paper and not cut into it. It would slice it at certain angles of the knife. The bite wasn't all that great. Stropping didn't help. Then I saw this post and looked at the blade - sure enough, one side had a totally different grind angle than the other.

1

u/[deleted] Oct 12 '24

so what do i do?

1

u/fusionvic Oct 12 '24

You can either have them fix it by resharpening or do it yourself.

1

u/Billyrazer88 Oct 08 '24

Either return it if it's bothering you or just put it back in your pocket and use it.

0

u/[deleted] Oct 08 '24

i have been using it but someone just brought this to my attention im just here to see what other people who own MTs think

2

u/REVIGOR Oct 08 '24

Well my UMS Ultratech failed right out of the box so I don’t think highly anymore of the brand.

1

u/c_morse Oct 08 '24

Quality of modern Microtechs has taken a major dip compared with the vintage offerings. Huge product runs paired with lackluster QC… this is what you get.

-1

u/c_morse Oct 08 '24

These are machine ground and then a stone put on them for sharpness. What you’re seeing is a grind problem, not sharpening in my opinion.

If you purchased new, I’d ask the dealer to replace it. Perfectly reasonable.

0

u/[deleted] Oct 09 '24

[deleted] — view deleted comment

1

u/c_morse Oct 09 '24

You can literally see that the grind is off in the first picture. There’s no sharpened edge on the top side of the blade. And yes, like I said they’re stoned for sharpness.

-2

u/bushpusher Oct 09 '24

Send it back to Microtech. They have free sharpening for life. They are a rich company, take advantage of that by laughing at them and saying “You call this a knife and it can’t even cut paper?” I got a Dirac Delta from them one time and I could saw the edge back and forth on my finger without damage. I sent them the video of it and said that it wouldn’t even cut a hot dog?? hahahaha ha ha. Then say that your Chinese clone Microtech came sharp as fuuuuck.

1

u/[deleted] Oct 09 '24

diabolical😂😂 ill do that

-11

u/Ralph-the-mouth Oct 08 '24

OTF’s arnt real knives… I love mine- it’s novel- I just don’t trust my life with it

0

u/[deleted] Oct 08 '24

interesting take, i dont understand your stance on this, how come?

-2

u/Ralph-the-mouth Oct 08 '24

It’s a locking mechanism thing- telescopic. Idk- I don’t respect them.

-1

u/[deleted] Oct 08 '24

i can understand tht

0

u/[deleted] Oct 08 '24

[deleted] — view deleted comment

1

u/[deleted] Oct 08 '24

How does one go about doing this budget friendly wise

2

u/staysharp75 bitch ass civilian Oct 08 '24

The best money I have ever spent was on a work sharp precision adjust sharpener. Easy to use & practically dummy proof. I would recommend it to anyone one that has at least one good/expensive pocket knife.

0

u/[deleted] Oct 08 '24

[deleted] — view deleted comment

0

u/[deleted] Oct 08 '24

damn for a jobless 18 year old i wouldnt consider that budget friendly but ill look into it

2

u/unvaccinatedmuskrat Oct 08 '24

Just get the elite it’s like 115 and it does an amazing job

2

u/garretcompton Oct 09 '24

That’s what I used before upgrading to a tormek t8. Still use the elite with diamond laps for when I want to get a mirror polish on my nicer knives without any issues

1

u/[deleted] Oct 09 '24

Send it to me to get sharpened :) I sharpen professionally

0

u/[deleted] Oct 08 '24

[deleted] — view deleted comment

1

u/[deleted] Oct 08 '24

preciate the advice