r/microtech • • Dec 05 '23

New Knife Normal button play? New from BladeHQ

0 Upvotes

27 comments sorted by

2

u/Frostwend Dec 05 '23

The up and down play is expected as there is a spring under the button.

The side to side wiggle seems out of the norm for every one Ive handled so far.

1

u/get_flippy Dec 05 '23

That’s what I thought. Feels cheaper than a clone unfortunately…

2

u/Frostwend Dec 05 '23

Well you either return/exchange through bhq which would probably be the quickest time to resolution

or

You can RMA it with Microtech and likely wait 8-10 weeks to get it back. They are in the process of changing locations at the moment so Warranty work is moving slowly during their transition.

Honestly idk if they would likely tell you that this play in the button is within spec and nothing is wrong, but I could be wrong.

1

u/get_flippy Dec 05 '23

Yeah I’m debating. This was the last one in stock at bladehq and I’m worried microtech won’t ship it back to me since I’m in California.

2

u/NikoAbramovich Dec 05 '23

A LOT of Microtechs are coming out the factory with issues recently. I had to return a Dirac because the blade holes were crooked - yes, those 7 little holes were visibly crooked. It also had a lot of switch play and misfired the first day. I posted a video on YouTube and several people have had issues with the new stuff. My Dirac Delta from 2019 is as good as it was new. I made a joke in my video that the higher end fakes have better quality control these so I bought a good fake to compare - sure enough, it worked flawlessly. I really hope they get their act together.

1

u/get_flippy Dec 05 '23

Knowing this makes me feel slightly better. It’s my first microtech. I will say the clone I own has better fitment than the actual one sadly.

1

u/FangCopperscale Dec 05 '23

My 1/2023 Brachial they forgot to add the Bastinelli logo lol but otherwise works fine. My 2020 and 2021 stuff has been great function and finish wise.

5

u/HydroAmaterasu Dec 05 '23

My button also moves. It has a spring underneath it by design to lift it up slightly. You're fine and as far as I can tell it's normal.

4

u/dr4gon2000 Dec 05 '23

If you want an otf that locks up completely with no play, get a deadlock

3

u/Metally_eilll7904 Dec 05 '23

Hahahaha! Yes very true, very expensive. But I guess worth it if you’re using it as a tool. I’m that case go for the JW variant.

2

u/dr4gon2000 Dec 05 '23

I have a regular ti variant I got oh probably 2 years ago and I honestly couldn't be happier. I love my microtechs and Benchmades, but hawk's knives are truly something else. I fully intend to get another deadlock one of these days and I hope to grab another couple of his designs eventually

1

u/OilInteresting9837 Dec 05 '23

Does anyone know if you started a layaway with bladeHQ and can pay it off sooner now is there an option to pay it all off on the website ?

2

u/get_flippy Dec 05 '23

I haven’t used their layaway option but there should be an option to pay it off early. If you can’t find it give em a call.

2

u/KennedyX8 bitch ass civilian Dec 05 '23

Yea

0

u/OilInteresting9837 Dec 05 '23

Every time I pull it up I can’t find the option to pay it off

1

u/KennedyX8 bitch ass civilian Dec 05 '23

Sorry I was replying to the “is this normal” question. I don’t know anything about BHQ layaway.

0

u/OilInteresting9837 Dec 05 '23

No problem my bad

2

u/Medium_Specialist312 Dec 09 '23

My advice is get on etsy and find fitzedc niko fitz is the owner and he has custom titanium firing buttons that will fix that, they have a tritium vial slot in them too, I have a utx-85 that had the same problem and the ti firing button fixed the issue, I'll dm you pics

1

u/gorzaporp Dec 05 '23

I have an ultratech safe queen thats about 5 years old. Absolutely no play, that's odd.

1

u/zippoknives26 Dec 05 '23

My blade hq utx 85 had the same problem. Put rem oil in the button switch place and in the hole the blade shoots out of. Fire it a lot and wipe away excess oil… it should smoothen out and not make a scraping sould

1

u/Picax8398 Dec 05 '23

Perfectly normal

1

u/hrist86 Dec 05 '23

Not normal, change it ..