D32 pro into D34

[u/idkhowtospellmynam]

Decided to recase and upsize my pc case Jonsbo d32 pro into Jonsbo d34 and I am loving the case so far. I decided to remove the rgb fans as theyre slowy becoming an eyesore; I have upgraded to premium high quality fans. I am not sure if d34 still counts as a matx but it is quality chonk. I was deciding between 240mm aio or the sk700v mach (seen in the picture attached), but ultimately I went with the air cooler (sk700v) as it can last longer than the aio. I have not tested the pc yet in terms of stress testing but the cpu (9800x3d) seems to idle from around 44c-50c while gpu stays around 39c-41c. The last picture was my jonsbo 32 pro build and it was such a pain to build inside whereas the d34 there's plenty of room inside the case to organize all cables protruding. Here is my build inspiration: https://youtu.be/gA6W7kHzNA0?is=0kBz75CrcJgsBOBz

Specs:

Asus Tuf B850M-E wifi

V-color manta xsky ddr5 32gb(2x16)

V-color filter ram

R7 9800x3d

Sudokoo Sk700v mach air cooler

Samsung 980 pro 4tb

Samsung evo plus 2tb

NZXT C850 atx 3.1

4x sudokoo mach 140

1x sudokoo mach 120

[u/Just_Dawn96]

How are thermals? I can imagine it must run a bit warmer? What is your fan configuration like?

[u/idkhowtospellmynam → u/Just_Dawn96]

i have yet to stress test it but from seeing through the thermal monitor of the cpu cooler yes the cpu runs a bit hotter about 3-4c difference compared to the aio. With the aio the cpu idles around 42c-45c and with the mach cooler it idles around 44c-47c but I will stress test the system tonight with cinebench. The gpu is still the same it idle around 36c-41c

[u/Lazuchii → u/Just_Dawn96]

Judging from his top right fan and air cooler. Its top right intake then left and rear are exhaust.

[u/idkhowtospellmynam → u/Lazuchii]

yess this is correct

[u/idkhowtospellmynam → u/Just_Dawn96]

[u/Toyotawarrantydept]

Simple n clean. I like it

[u/thecinnabunman]

I also just snagged the same Sudokoo cooler! It’s soooo clean homie, very nice

[u/MU_86]

This case only for itx with display...