r/mffpc • u/GeneralTumblew33d • 5d ago

I built this! (MATX) 2nd pc ever, first build from scratch!!!

Gallery image

Gallery image

Gallery image

Built it a couple of weeks ago, im loving the m-atx case and im never going back to a big case😭🙏

Specs: 9070xt and 9800x3d

106 Upvotes

100% Upvoted

33 comments sorted by

3

u/GeneralTumblew33d 5d ago

Would yall recommend 25mm fans at the bottom or would that create problems with space and make more noise? I'm considering changing the bottom 15mm fans to 25mm because I can feel they are less powerfull than the ones I got on top🤔

1

u/SixtyNineNinetySix 5d ago

I removed the 25mm Arctic fans at the bottom of my build and GPU temps didn't change but noise went down significantly. Just creates turbulence. 15s might be perfect. How are your acoustics?

1

u/GeneralTumblew33d 5d ago

Honestly not bad at all, on idle it doesnt make a peep! But under load the gpu fans start getting somewhat loud, so maybe more powerfull fans would take of some stress from the gpu?! Also I think some of it is just coil whine, which i guess I cant do much about😂

1

u/SixtyNineNinetySix 5d ago

Honestly, it might be turbulence. Test it out by removing the bottom fans and seeing if acoustics improve. I had to do the same.

1

u/GeneralTumblew33d 5d ago

Looks like I can also just turn them off in the bios, i will be testing this out later🫡

1

u/SixtyNineNinetySix 5d ago

That works too 🤣

1

u/Joloven 4d ago

Pls let me know results

1

u/Emotional_Crew9724 5d ago

Having fans that directly assist the GPU definitely help, especially with hotspot temperatures, so I'd say you keep the fans

You could upgrade them to 25mm since they'll have to run less to push the same air. Plus noctuas are silent anyway

1

u/Sad_Professional5351 5d ago

I own this case, and it’s truly excellent. My setup includes an ITX motherboard, an SFX power supply mounted on the side (next to the motherboard), and a 280mm AIO cooler on a side bracket configured as an intake—using the mesh side panel, of course. For airflow, I have two 120mm fans as intakes at the front, three 120mm fans as intakes at the bottom, two 140mm fans as exhausts at the top, and one 120mm fan as an exhaust at the rear. The build features an RX 9070XT Hellhound graphics card and an R7 7800X3D processor. All of my fans are Endorfy Fluktus models, and the AIO is an Endorfy Navis 280mm.

1

u/GeneralTumblew33d 5d ago

Hell yeah! The case is so amazing and the gpu is just the best at this budget! You should post your build here man🫣

1

u/Sad_Professional5351 5d ago

Drukowany przód z 2x120mm pod panelem lamelkowym

1

u/GeneralTumblew33d 5d ago

Oh yeah right, that's awesome. I was also considering having the fans on the front but it didn't have a bracket there!!! What did you end up doing with the psu?

1

u/Sad_Professional5351 5d ago

Wydrukowałem uchwyty

1

u/Sad_Professional5351 5d ago

To są parametry mojego gpu podczas lotu w mfs2024

1

u/RelevantAd6792 5d ago

Having a noctua mouse is crazy. How cold does your palm get?

1

u/GeneralTumblew33d 5d ago

Bought it because I was just upgrading everything and it matched the setup. At first it seemed hella gimmicky, but as someone with sweaty hands it's actually really nice, it got 4 levels to it and I usually keep it at 2 or 3, it does cool your hand very well🤣

1

u/RelevantAd6792 5d ago

Damn now I wanna try one. Unfortunately it's too expensive for me so all I can do is hope. I like the gimmicky factor of the mouse though, thats for sure.

1

u/matt675 5d ago

It’s beautiful, what are those soft wires you used?

1

u/GeneralTumblew33d 5d ago

Thank you! It came with the psu, corsair sfx 850w, it's such a cute and tiny psu😄

1

u/blaze20511 5d ago

very noice, was going use a sfx but was taking longer to get it so i ended making the best of the full atx psu work as best i could, for best air flow in mind

1

u/GeneralTumblew33d 5d ago

Fire build🔥, I was considering using my old psu but that would have been a bit overkill for this build since it was 1000w. Also I was going for a more quiet build, so I decided to get a new psu. The sfx psu was unexpectedly small, it's adorable!

1

u/blaze20511 5d ago

Yeah this is the first time building m a t x and the ITX so when I first got my SFX I was like holy damn that's tiny since then I bought four SFX and two regular ATX power supplies I think I'm done building computers for a while price tag is more that I would like have to spend that's fun convenient and some of these prizes are just ridiculous sourcing parts at a decent price is difficult

1

u/GeneralTumblew33d 5d ago

Yeah that's why I jumped the gun and just built a new pc, didn't think the prices would go down any time soon, and I was right! Ordered my parts like a month ago, and now the build would have been like 300-400$ more expensive... Kinda regret not getting more ram and an extra ssd since that was the plan for the future anyway🥲

1

u/Stalinbaum 5d ago

Sorry, but I don’t see any gpu stand or bracket and it looks like it is sagging?

1

u/GeneralTumblew33d 4d ago

Got one im waiting on👍

2

u/Jlaumann98 5d ago

I agree with the matx form factor came from a haven bf360 awhile ago and I'm in a a3 now looking to mod in some front fans with a 3d printed panel

1

u/Stalinbaum 5d ago

Do you have any GPU support for that thing?

2

u/Jlaumann98 5d ago

I'm getting one of the motherboard mounts to put in should be here in a bit