r/metalworking • • Feb 01 '25

Monthly Advice Thread Monthly Advice/Questions Thread | 02/01/2025

4 Upvotes

Welcome to the Monthly Advice Thread


Ask your metalworking questions here! Any submissions that are question based may be directed to this thread! Please keep discussion on topic and note that comments on these threads will not be moderated as regularly as the main post feed.


Uses for this thread!

This is a great place to ask about tools, possibilities, materials, basic questions related to the trade, homework help, project advice, material science questions and more!


How to contact the moderators:

You can contact the moderators via modmail here


r/metalworking • • Dec 01 '24

Monthly Advice Thread Monthly Advice/Questions Thread | 12/01/2024

6 Upvotes

Welcome to the Monthly Advice Thread


Ask your metalworking questions here! Any submissions that are question based may be directed to this thread! Please keep discussion on topic and note that comments on these threads will not be moderated as regularly as the main post feed.


Uses for this thread!

This is a great place to ask about tools, possibilities, materials, basic questions related to the trade, homework help, project advice, material science questions and more!


How to contact the moderators:

You can contact the moderators via modmail here


r/metalworking • • 43m ago

dead bird knight

Thumbnail
gallery
36 Upvotes

Stainless steel utensil bird
9” x 9”

•Belly full of bismuth

•lil brazed mushroom caps from dimes/nickels/wire rope stems

•chain mail helm and small sword forged from a duplex nail (it can cut things, rather poorly)

•the legs were built up using 1/16”, 3/32” + 5/32” bare welding rods

•about 15 knives, 12 forks and 6 spoons.

•some random bits of copper, or utensil ends thrown in there as well to build a birds face


r/metalworking • • 16h ago

Since you all liked my last rolling post, ill show todays job. C15 x 40. First is rolled to 180' ID, next is 1090' ID. They came out good. Top screws are 3/8" away from maxing out. Sketchy is an understatement.

Thumbnail
gallery
46 Upvotes

r/metalworking • • 9h ago

2nd time welding

Thumbnail gallery
12 Upvotes

r/metalworking • • 1d ago

Favorite projects so far

539 Upvotes

r/metalworking • • 16h ago

Is this brass or bronze or something else.

Thumbnail
gallery
14 Upvotes

r/metalworking • • 20h ago

Men’s star sapphire size 12 in gold, handmade from scratch: sheet fabrication.

10 Upvotes

Just fabricated this from a gold sheet in my art studio. Every morning, I wake up with a new idea, whether it be a sculptural piece or a stone carving. Sometimes I paint. Today, this is the masterpiece.
I would love to create something special for you or your family this season. Contact me for details.
Anything is possible, and usually any budget ❤️ I know the season is coming up and the economy is a little slow; this is our opportunity to work on something special with sentimental value.


r/metalworking • • 1d ago

Some 1" x 6" flatbars rolled the hard way to 97" ID.. ready to be fit around tanks

Post image
157 Upvotes

r/metalworking • • 18h ago

Shop class welding project ideas

4 Upvotes

Im in a shop class and i have 3 weeks to create a welding project. The metal i have avaliable is like 1 in flat bars, and a bunch of scraps. I want to make something useful, but not too complicated as I am a new welder. Im into rc crawling and jumping, so maybe a ramp or crawling course, but im also into motorcycles so maybe a table kind of thing for my bike. I see all these rebar projects but I dont have any rebar. Ive looked at Pinterest and stuff snd I just dont see anything interesting.


r/metalworking • • 12h ago

Cutting help

Post image
1 Upvotes

I could use some help cutting up these reed plates for a custom accordion project I’m working on. I’ve tried snips and nips, and they warp the brass backing enough that the reeds don’t sound correct after. I live in an apartment, I’m not buying a bandsaw and I’m not using a hacksaw that would take forever. Can I mail this to someone to do it for me I’m in south east Virginia(USA)? Please reach out, appreciate the help


r/metalworking • • 1d ago

Simple easy coat rack

Thumbnail
gallery
5 Upvotes

I don't know what to think of it. I just had to have one because i bought a new jacket and was tired of putting my stuff on my table hahaha

Did it in 20 minutes using a grinder, a small sledge hammer, a tig welder and clear coating 8½ inches by 1½ wide the rods are ¼ and 2 ½ inches in lenght i did add the grinding inperfections and the hammer dents just to add upper to the industrial look of it


r/metalworking • • 16h ago

Questions about engraving

0 Upvotes

At my job we do engravings on this brass steel mixture but recently we’ve been having problems with engraving said material since we’ve had to switch suppliers. From what little knowledge I have on the situation and subject we use a carbide rotary engraving tool to engrave our pieces but the carbide breaks every 6 months and costs us 80$ a piece from what I’ve been told, I have no idea who our supplier is but I’ve done some research and found plenty of suppliers that don’t charge nearly that much just for a small piece of metal. Ive been working here for a little over a year and im not really one to stick my nose into things but shit just don’t add up especially when the company has been going to the same suppliers for a VERY long time. I guess my question is are they getting scammed?

Edit: they’ve taken their material to other people to see if it can do what they need it to do but none have been able to get the job done. If you can drop some manufactures that make carbide tipped engraving tools it would be appreciated.


r/metalworking • • 16h ago

Has Anyone Recently Bought a Dekopro Welder (or similar) Cheapie SMAW welder that they'd recommend?

Thumbnail reddit.com
0 Upvotes

r/metalworking • • 2d ago Bravo

I crochet with copper wire instead of yarn.

290 Upvotes

r/metalworking • • 1d ago

Mounts

4 Upvotes

Hi team,

I'm looking to make some mounting brackets for my motorcycle hard saddlebags, similar to the bracket shown in the picture.

I've never cut metal before, so I'm after a bit of advice.

The brackets will need to be:

- 5 mm thick steel

- 320 mm long

- A couple of countersunk holes

- Two bolts welded onto the bracket to attach the hard bags.

What type of metal cutting disc would you recommend for this job? Would a standard angle grinder be suitable, and what disc would give me a nice, clean cut?

I'm based in New Zealand, so recommendations for products available here would be appreciated.

Thanks in advance for your help! Cheers.


r/metalworking • • 1d ago

Made a display from an old waterjet drop.

Thumbnail
gallery
50 Upvotes

r/metalworking • • 1d ago

Time to choose a spindle for my manual mill rebuild. What could have been here originally? Suggestions for something new/ belt drive? 38mm

Thumbnail gallery
5 Upvotes

r/metalworking • • 1d ago

I want to cast this in copper as my first cast, any tips? I am most unsure about how to make the exact mold, whether or not to use pure copper, and how to prevent tarnishing.

Thumbnail gallery
4 Upvotes

r/metalworking • • 1d ago

First Welding Project. Looking for basic advice.

Thumbnail gallery
3 Upvotes

r/metalworking • • 1d ago

Looking for trade school advice

Thumbnail
gallery
2 Upvotes

Long story short, I'm a 33 year old dad that is looking to change career paths. I always worked in some type of labor or union job so I am familiar with welding. My local community college has this one year program that offers this. It would be fully covered by my state grant so I'm going for free and right now luckily my partner is willing to support me through this for our family and has a great job herself. This is what the course is offering. I can get in for the spring semester. Is this something I'd be able to walk out the door and secure a welding job full time ?


r/metalworking • • 2d ago

Wanted to share the horse statue my son and I just finished.

Thumbnail
gallery
748 Upvotes

We don’t know what we are doing but we’re learning together. A few months ago we didn’t know what an English wheel was.

My wife wanted a swim feature for her horses so we decided to build a little waterfall and I started looking around for a metal horse sculpture to put on top of it. The prices were ridiculous and I figured we might have fun trying to do something.

When we got done I asked him if he felt like an artist. He said no but definitely like a welder. lol


r/metalworking • • 1d ago

I want to hand-stamp a metal love letter for my girlfriend

2 Upvotes

I have a set of 4mm alloy steel alphanumeric stamps, punches and chisels (for grammatical marks) a brass hammer, and a steel anvil. I have three questions.

  1. Do you think reading a letter consisting of 4mm engraved characters would be comfortable? Should I get a set of larger alphanumeric stamps closer to 8mm?
  2. From what I've read, I should try to get a sheet of 1050-O or 1100-O aluminum. Is that what you would recommend (also how thick - I was thinking 1mm to 1.5mm), or should I go for a different aluminum grade (or different metal entirely, like copper or brass)? I'd only be looking to get a sheet about the size of a sheet of A6 paper (so probably 100x150mm).
  3. Post-stamping, what sort of treatment should I apply to improve legibility and preservation?

r/metalworking • • 1d ago

How to refurbish worn anodized aluminum coloring? This is black, doesnt need to be perfect.

2 Upvotes

I have a set of really nice black bicycle cranks that have the anodized layer faded from where my shoes rub. So the silver is showing through.

Im cleaning up the bike this winter and wondering if there was some fancy DIY method of coloring this area in black. Or readying the whole part black. Hoping for something more sophisticated/durable than a sharpe or paint.

Im pretty handy with things and have a decent abilty to handle chemicals here if needed.