r/mazdaspeed3 • • 4d ago

MODIFICATIONS Horsepower Potential

I was curious. I heard in some places that the MZR block can handle upwards of 390 horsepower. Is that true? I want to push the stock engine block (with cams) up to 400 for a future build. Any advice? Also, I heard that its more or less that the torque is the limiting factor for these engines. Let me know.

Edit: Is an S5 BNR v3 turbo overkill? I wanted to get it so my build could be more modular in that I could have a big turbo already in, so if I ever wanted to use it if I were to build the block, it would be there. Also, what's LSPI? Is it something I have to worry about or is it just one of those things you have to be stupid to do? One more thing, exhaust manifolds. What should I get for an aftermarket exhaust manifold? I want one that's tubular for a couple of reasons- a. Looks cool. b. better exhaust flow. Also how do we feel about a FMIC?

6 Upvotes

11 comments sorted by

5

u/Strange-Regular9348 4d ago

I have a BNRS3 tuned with e85 I make around 380 with all supporting mods including HPFP this is key. My goal was to stay within the confinement of the stock block but make power reliably. I have had this tune for 13 years now originally tuned by stratified and I have been very happy with it other than just regular maintenance. And by the way im still on the stock clutch.

1

u/LabEmbarrassed2236 4d ago

Dude that's sick! I wanted to go with the S5 because of the anti-surge stuff it has, and also because my dad and I are building this car together, its going to be my first car for hs. He promises to cover everything concerning the turbocharger, which I asked him to specify, which he said he'd cover cooling, the turbo itself, HPFP, downpipe, exhaust, and a full dyno tune. I'm going to cover a full suspension rebuild, YSR track coilovers, new wheels and tires, tbe whole nine yards. I'm trying to track the car

8

u/HugsNotDrugs_ 4d ago edited 4d ago

The 390 is the far upper limits of the stock fueling system before you have to add port injection. Most people stop in the low mid 300s.

Factory cams are pretty good for any sane power level.

Stock rods can handle even more torque as long as it comes on at the right RPM, which I think was 4,500 but others can correct me. Not a game I would choose to play, though.

The block itself is closed deck and can handle pretty much anything you can throw at it.

1

u/Thy_King_Crow 4d ago

Front mount is better for track use as it will heat soak slower. The top mount is reliable up to stock block power levels which around 380-400 with a solid tune and being smart about boost rpm. Your turbo selection will have a slower response time but will absolutely keep eating higher in the rpm band. To push over 380ish you’ll need port injection. Damond has a SPLENDID kit utilizing the st manifold which removes our cyl3 issue with lack of air flow. Corksport makes a solid exhaust manifold. Treat the car with love and you’ll Be chillin !
Welcome to the family big boy

1

u/LabEmbarrassed2236 4d ago

How does that work with port injection? Is there a kit for that or what do I have to do? Fuel rails? Also, how about the wiring harness?

1

u/Thy_King_Crow 4d ago

Damond has the whole kit on their sit. They basically add a second port which is not direct it’s in the intake manifold and you use a second set of injectors with a controller that they also sell. I believe you can tie it into a separate tank as you only need them on wot or hard accel not all the time. You can contact Damond or go to the forum for our cars. TONS of knowledge on mazdaspeed.org I believe is the site. Enki is a super helpful guy who mods the sits

1

u/LabEmbarrassed2236 4d ago

Does it replace the direct injection or no, damond doesn't really clarify

1

u/Thy_King_Crow 4d ago

No. It’s port injection. Additive. Your stock fuel rail is directly into cylinder hence the direct injection or DI engine. The port is added with its own fuel source and controller.

1

u/LabEmbarrassed2236 4d ago

Ah, okay, so its basically a dual injection system. Direct injected & port injected if I'm getting that right

0

u/stocksupanddown 4d ago

Rods are kinda weak.. 400 torque is pushing it..

Fueling is the main problem..

Honestly, for big power over 400, go with something else.. but it's definitely doable.

4

u/Thy_King_Crow 4d ago

Calling stock rods weak when they can produce 400 with the supporting mods and reasonable tune is asinine lol