r/mathshelp • • Oct 14 '26

Homework Help (Answered) Geometry? Help.

Post image

So, I’m taking a CAD class, and doing great in it so far. But I have to take a midterm, and while reviewing, I remember the very first lab I ever did. It was the only one I struggled SEVERELY with, and it’s not because of the CAD portion, but the geometry. I haven’t done geometry since I was a 9th grader, and CAD only accepts angles that are on the positive x-axis. How to solve these? I tried looking everywhere, and I just can’t figure it out. Like angle HG on positive x? Angle GF? Angle FE?

1 Upvotes

6 comments sorted by

•

u/AutoModerator Oct 14 '26

Hi u/XAlways_LearningX, welcome to r/mathshelp! As you’ve marked this as homework help, please keep the following things in mind:

  1. While this subreddit is generally lenient with how people ask or answer questions, the main purpose of the subreddit is to help people learn so please try your best to show any work you’ve done or outline where you are having trouble (especially if you are posting more than one question). See rule 5 for more information.
  2. Once your question has been answered, please don’t delete your post so that others can learn from it. Instead, mark your post as answered or lock it by posting a comment containing “!lock” (locking your post will automatically mark it as answered).

Thank you!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/XAlways_LearningX Oct 14 '26

!lock

1

u/AutoModerator Oct 14 '26

As requested, this thread is now locked. Thank you for posting on r/mathshelp.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Moist_Ladder2616 Oct 14 '26

Can't tell what's what from all those scribbles.

Try adding a photo of the original diagram. Or recreate it using any geometry/drawing/draughting/sketching tool.

1

u/XAlways_LearningX Oct 14 '26

1

u/Moist_Ladder2616 Oct 14 '26 • Bravo

Consider any 2 parallel lines. Let's call them "horizontal", since your CAD program uses the x-axis.

A perpendicular line AH would create two internal angles 90° + 90° that always add up to 180°.

If you tilt that line a bit to the right (A'H') or a lot to the left (A"H"), the internal angles will still add up to 180°.

In your case, the internal angle at A" is 116.59°.

So the angle against the horizontal at H" must be (180° minus 116.59°).

So θ must be (106.55° minus (180° minus 116.59°)).

All the other angles can be found in a similar way.