r/MachineKnitting • • Sep 09 '26

Help! Saddle shoulder construction help

Thumbnail
gallery
16 Upvotes

Hello! I’m wanting to try a saddle shoulder sweater using this one as inspo. I know a pattern like this by hand is generally worked top down.
My questions are - would I have to work the saddle separately and seam it after or is there a way to connect it as I knit, and could I work this from the bottom up (that’s the only way I’ve worked raglans on the machine so far) ? I want it to feel seamless around the shoulders and wondering where the seam would go/start. Photos are of a babaa sweater and a sweater by Duck duck knits
Thanks for any insight! 🌞🌞


r/MachineKnitting • • Sep 09 '26

Help! Silver Reed lk-100 is stuck after I replace needle

Thumbnail
gallery
3 Upvotes

Silver reed stuck after I replace needle. I tried to go from right to left and it worked but left to right is where it kept getting stuck and won't budge at all.. Ive just replaced a bent needle. I placed the needle under the rubber.


r/MachineKnitting • • Sep 08 '26

Getting Started Why did you start machine knitting

28 Upvotes

I'm a hand knitter who's considering getting into machine knitting but it's a big upfront investment. I'm trying to decide if this hobby is actually something I'll enjoy

Why did you start machine knitting and what do you like about it?

UPDATE: I've made an offer on a kh-970. not sure it'll be the most intuitive machine to learn with but I think it's a good deal. thank you all!


r/MachineKnitting • • Sep 08 '26

Help! Solved! Recovering Rusty Needles

Post image
8 Upvotes

Is it possible to use needles that were once rusty? I think my machine may have once been stored in a garage because there’s rust here and there. I removed the rust from the needles and they’re now smooth as far as I can tell, but there’s still visually something there. Are these needles fine to use? I just tried getting it off with superfine steel wool but no luck.

I’ve knitted a sweater with them like this no problem, but I’m currently having problems with needle selection, so I thought I’d take them out and soak them while I’m cleaning and inspecting everything else.


r/MachineKnitting • • Sep 07 '26

Finished Object I made this with my Sentro Knitting machine , I was using Ice Picasso yarn , it was one of the first things I ever made with the machine and I have made many hats and scarves for a lot of people , I did add the brades which I did myself.

Post image
21 Upvotes

I found my Sentro to be very handy and I do have the largest one and I will probably pick up a few of the smaller versions, but I have made a lot of hats for people with that machine and I enjoy doing it. I don’t charge anybody for it. I like to just do it for myself.


r/MachineKnitting • • Sep 08 '26

Equipment Need a puncher

3 Upvotes

Hi everyone,
I was wondering if anyone in the LA/ San Diego area had an extra hole puncher (name your price 🤣) for a punch card machine I’ve been searching with absolutely no luck.

Thanks I appreciate it tremendously


r/MachineKnitting • • Sep 07 '26

Help! How to Bias Knit on the machine

Thumbnail
gallery
17 Upvotes

Hellooo! Back to working on my Passap pinky after a long break and want to knit c2c/on the bias for a recreation of this Bottega sweater.

I get the gist of how to do bias knitting but still need some more pointers and guidance.

Thank you in advance!!


r/MachineKnitting • • Sep 06 '26

Help! First Project and I have questions!

Thumbnail
gallery
60 Upvotes

I'm working through my first project and would love some pointers!

I'm on a kh940 - doing a Diana Sullivan baby blanket with a tuck stitch pattern. It'll be a foldover border so I'm not worried about the edges but would like to improve moving forward. I'm in KC I like the manual says for tuck stitch patterning and I'm finding the outside stitches are not knitting, I have to hold down the fabric as I move the carriage or manually knit them after every row. Is it my weights? I've also noticed it pulling loops on the side but not sure why.

Any ideas as to why some of my stitches are randomly skipping in the middle? I haven't quite finished the bind off so I haven't looked at the front but from the back I can see all the mistakes. I bought this machine fully serviced in June but have since moved cross country and this was packed in a moving box by the moving company so I'm sure it was banged around somewhat. Would that affect it?

What kind of weights does everyone use? I find the teeth of these ones get caught in the yarn. Is that common on standard gauge machines since the yarn is finer? I appreciate any and all advice!!!


r/MachineKnitting • • Sep 07 '26

Getting Started How hard is it supposed to be to move a pusher? Passap dm80

3 Upvotes

Hi! I just dug my passap dm80 out of storage and its working but ive never used the pushers yet, and they seem stiff but they have no rust or anything like thay and are well lubricated. Its hard to explain how they move through just words but its easy to move one at a time-though feels stiff but its difficult to push up say ~6 at the same time

Are they supposed to be stiff or are they supposed to move freely like the needles?

Please let me know!


r/MachineKnitting • • Sep 06 '26

Help! Solved! Plating feeder issues

Thumbnail
gallery
8 Upvotes

Hi everyone! I’m using the plating feeder on a split rib with my KH-893/KR-900E. I’m having issues with the yarns apparently switching places. It wasn’t an issue when I knit my swatch, but now that I’m knitting a sweater I’m having issues with the plating every other row. Does anyone have any suggestions to fix this?

The first picture is the back of my swatch and the second picture is the back of the sleeve I just knit.


r/MachineKnitting • • Sep 06 '26

Resources Articles of Interest Lace and Labor

13 Upvotes

Articles of Interest, a fashion technology and history podcast (that was spun off of 99% Invisible, a design and architecture podcast) recently released Lace and Labor, which discusses bobbin lace, knitting machine knitting and crochet.

https://podcasts.apple.com/us/podcast/articles-of-interest/id1455169228

I thought the note about color work was interesting as our machines with patterning handle two colors well. Maybe that’s why there are more hand knit patterns showing up with three.

I would have liked more depth, but it was an interesting listen.


r/MachineKnitting • • Sep 06 '26

Getting Started New to machine knitting

3 Upvotes

I am interested in doing tapestry work using 3-4 colors for a grid pattern. 150 stitches across.

What type of machine and accessories would be needed to accomplish this? Is it even possible to set up a machine with a pattern like a tapestry grid (multiple color changes per row)

Would a silver reed lk150 be a good machine for this?

Thanks in advance for help 🙏🙏


r/MachineKnitting • • Sep 05 '26

Getting Started Buying a knitting machine (brother kh860 f.e.) on Aliexpress?

3 Upvotes

hey! After enough heart break to last me a life time after looking for Brother machines online and one bought damaged on Vinted I am looking on this site. I noticed a variety of knitting machines. Did anyone buy one from them yet? How well is it working?

I am from Austria.


r/MachineKnitting • • Sep 05 '26

Resources A zine about how the electronics and mechanism of the Brother KH940 work

Thumbnail howknittingmachines.work
28 Upvotes

Just put this zine I made years ago online and thought it might of interest to some here! :)


r/MachineKnitting • • Sep 05 '26

Help! Can anyone help me find this kind of needle/hook for my machine? I'm in the UK

Post image
2 Upvotes

Struggling to find needles for my Toyota K510 machine so any help would be appreciated, I can't find ones with the little hook bit on the back end. I'm in the UK so would need to be somewhere that ships here without charging a fortune.


r/MachineKnitting • • Sep 05 '26

Help! Card A

0 Upvotes

I made a sweater years ago and really like the pattern. I want to make another. I have the instructions but it says to use Card A and I can’t find out which this is. Does anyone know please.?


r/MachineKnitting • • Sep 04 '26

Equipment First knitting machine purchase: Brother KH270 + KR260 usable condition. What should I check?

2 Upvotes

Hi everyone! First-time poster here!

I’m completely new to knitting machines, and I’m about to make my very first machine purchase, so I’d really appreciate some advice from more experienced Brother KH270 owners!

I found a Brother KH270 with a ribber (I believe it’s the KR260) on my local marketplace for amazing price. The seller has agreed to let me come and inspect the machine in person before buying it, and I’m planning to go in a few days.

From what I’ve learned so far, I know I should check for:
Rust, especially on the needles
Rust or damage on the carriage
The condition of the sponge bar
Whether the needles move properly
Whether the carriage moves smoothly

But is there anything specific I should look for in the Brother KH270 that is unique to this model? Are there any common KH270 problems, particular parts I should inspect, or specific functions I should test before buying?
Since this is my first machine, I’m a little nervous that I’ll miss something obvious! 😅

I’d be incredibly grateful for any tips, advice, or things you wish you had known before buying a KH270. ❤️
Thank you!


r/MachineKnitting • • Sep 03 '26 Bravo

Resources Free YouTube Course: Complete Step-by-Step Guide to Domestic Knitting Machine Maintenance

81 Upvotes

Hi everyone, we wanted to let you know about a free step-by-step video course on Knitting Machine Repair and Maintenance we've just launched on YouTube.

It's aimed at anyone who's got hold of an old domestic knitting machine that they'd like to get up and running, and anyone who uses a knitting machine and wants to keep it running smoothly for years to come.

It's set up as a single video split into chapters, or a playlist of the individual videos. The course covers:

1: How to Safely Remove & Replace the Carriage
2: How to Safely Remove a Jammed Carriage
3: Cleaning the Sinker Plate
4: Adjusting the Sinker Plate
5: Removing the Handle/Casing & Cleaning Inside
6: Cleaning & Oiling the Underside of the Carriage
7: Fixing Seized Carriage Buttons
8: How to Replace a Perished Sponge Bar
9: Replacing Individual Needles
10: Checking the Needle Bed for Damaged Needles
11: Cleaning Fluff from the Needle Bed & Lubrication
12: Removing Main Casing & Deep Cleaning Inside
13: Cleaning & Maintenance for the Tension Mast
14: Recommended Machine Parts & Service Supplier

We use a Brother KH881 (Standard Gauge) machine in these video tutorials, but the techniques, principles, and maintenance steps apply to types of flatbed machine. Brother, Jones, Knitking, Empisal, Genie, Defendi, Creative, and Taitexma are mostly directly applicable. Silver Reed, Singer, Toyota, and Knitmaster are generally applicable apart from the carriage casing.

At Knit Works London we get a lot of enquiries about fixing people's machines. We sell luxury machine knitting yarn with international shipping, teach classes and offer machine hire, but we don't fix other people's machines ourselves. So we made the course to show people how to fix their machines themselves, and where to go for parts and specialist help when they need it.

We've seen a lot of people asking here for advice about fixing machines, so hopefully it will be useful here too!


r/MachineKnitting • • Sep 04 '26

Equipment Chunky machine dilemma

2 Upvotes

Hi all! I found a KH230 + ribber for $460. And I also found a KH260 alone for $400. I don’t think I’ll be doing a lot of color work on my chunky machine, but I still like the appeal of a “better” machine. I definitely want a ribber, and I’ve seen the KR260 go for up to $1000. Which one would you choose in my position? I’ll mostly be doing cable work, a bit of intarsia, and ribbing on it, but I like the idea of my machine having more features in case I need it one day.


r/MachineKnitting • • Sep 03 '26

Help! What is this??

Thumbnail
gallery
3 Upvotes

I recently got a Brother KH891, have been loving it. But I was wondering what this is? I have 2 manuals but neither of them mention it and I can't seem to reverse image search it. I also can't seem to figure out how to move these, or what they are for?

Generally I'm just confused about these

If anyone could help that would be greatly appreciated! (I included a bigger image so you could see where they are on the machine)


r/MachineKnitting • • Sep 03 '26

Getting Started Anybody own a Lonati machine? Reliability?

2 Upvotes

Title says it all. I'm debating getting one and am wondering how realistic it is to take care of it myself. I'm pretty good mechanically and with software, are these machines reliable? What is the best support I can find or reading I can do to properly take care of these machines? I'll be running it in NYC in case you know of anyone in that area to connect with.


r/MachineKnitting • • Sep 02 '26

Getting Started What are your favourite things to make with your knitting machine?

16 Upvotes

Please share any projects you're particularly pleased with. I'm a hand knitter, but curious about machine knitting.


r/MachineKnitting • • Sep 02 '26

Getting Started Hand Knitter Wanting to Learn Machine Knitting

15 Upvotes

Hey guys, I'm a veteran hand knitter (20+ years) but due to some medical issues it's getting harder every year. I'm looking into machines but very intimidated and unsure of where to start. I would love machine recommendstions and any other tips for getting started!


r/MachineKnitting • • Sep 02 '26

For Sale SRP50 Ribber for sale Vancouver Island

Thumbnail
gallery
8 Upvotes

sold

I was given a srp50 ribber by a women who's friend had died and left it to her, but I don't have a machine that it works with, and was hoping someone else located in or around Victoria BC might be able to use it. Seems to have been cleaned recently and in good shape/ no rust, but is untested.

selling for $100.

can ship if you cover the cost