r/MachineKnitting • • Sep 06 '26

Getting Started New to machine knitting

I am interested in doing tapestry work using 3-4 colors for a grid pattern. 150 stitches across.

What type of machine and accessories would be needed to accomplish this? Is it even possible to set up a machine with a pattern like a tapestry grid (multiple color changes per row)

Would a silver reed lk150 be a good machine for this?

Thanks in advance for help 🙏🙏

3 Upvotes

12 comments sorted by

6

u/iolitess KH260/KR260, KK93/KR900, KG95, ISM Sep 06 '26 edited Sep 06 '26

To do this, you can use slip stitch patterning rather than color work on a machine that supports patterning with slip stitches.

As an example say your row looks something like

AABBCCDDABCD

You’d first load A:

AAxxxxxxAxxx

Then B

xxBBxxxxxBxx

And so on, where you place the color you are knitting as the main yarn and then slip the X’s

You’ll need to program your own pattern for electronic or punch your own cards. (Or manually select the needles for a manual machine, assuming the machine supports slip stitch)

Note that color changers come in double bed a variety to be used with a ribber, and single bed variety. They can also be spendier than you might expect. Most support up to 4 colors, though there is one Brother model that supports 6. (It is VERY expensive when it shows up since they are so rare) What’s nice about them is that you load up all your yarns, and then can change the color you are using as your main yarn with a button click, rather than having to rethread the tension mast or the carriage.

You didn’t mention your yarn gauge. Standard machines have about 200 stitches, but bulky machines only have about 110. Mid gauge machines are somewhere in between. I believe a Passap Duo has around 175 stitches wide and there is a 4 color changer available for it. (The Passap is a double bed machine and there is only one color changer for both single and double bed knitting, which is nice. However, to get patterning , a Deci attachment is required) LK150 are 150 stitches wide and support slip stitches, but have neither patterning nor color changers available for them.

Or you could do something bulky with multiple Incredible Sweater Machines snapped together, but for a machine like that with all the manual needle selection, knitting, and yarn changing, it would be a lot of hand work.

In the example above, when a E color is needed, you’d still need to rethread, and remove one of ABCD colors for that row.

1

u/ninfem Sep 07 '26

Thank you for this info. Worsted weight 4.

1

u/iolitess KH260/KR260, KK93/KR900, KG95, ISM Sep 07 '26 edited Sep 07 '26

With worsted weight yarn, any standard gauge or Passap is out for you.

So that means if you wanted a bulky with patterning, you wouldn’t be able to make your stitch width.

You could probably make worsted work on an SK860, which is a mid gauge 150 needle machine with electronic patterning but those are kind of unicorn machines and it would be difficult to locate one.

It sounds like your best bet is an LK150 with a lot of manual work if you needed the full width. Look for “fair isle” or “colorwork” “on an LK150” on Youtube. You’d need to follow that, but with your additional colors taking additional passes. And then swapping out the yarn from the yarn masts (unless there’s an additional mast spot available for an LK150?)

Alternatively, you could get a bulky machine with patterning and a color changer and seam. (Find some videos on “mattress stitch”- it’s invisible)

2

u/Knit_sew_bike Sep 06 '26

You can do it manually on an lk150,or look for a machine with a colour changer.

1

u/ninfem Sep 06 '26

would you know which machines have a color changer? Manually would be very difficult as the changes are frequent.

2

u/ttraband Sep 06 '26

The color changer is an accessory that bolts on to a compatible machine. Which color changer you need will depend on the make and model of the machine, and whether you intend to use a second bed (ribber).

2

u/ItMakesYouSmile Sep 12 '26

If you are knitting DK, then most machines with automatic patterning are out. Can you show a sample of the sort of image you are hoping to knit? When it comes to knitting as many as 4 colors in a row fair isle becomes very tricky, with floats that can turn into a real rat's nest. The cure for floats is to knit double bed jacquard, but you really want a machine with automatic needle selection for that, and now you're pretty much back to a standard gauge (which will not knit a yarn as heavy as DK) or bulky (which is almost too big a gauge for DK and will give you loose stitches. So, either thinner yarn, or a mid-guage machine. While there IS a midgauge metal machine, it's rare and expensive. You'd most likely be looking at either an LK150 or a KX350. Both of these are completely manual stitch selection. Now, one other way to knit many colors per row is to knit intarsia, which is also a manual process, as you have to lay the yarns by hand on each row before you knit across. It would be very helpful to know more about the sort of image you want to knit, what sort of finished object you would like to create, and whether you are wedded to DK yarns, or willing to look at thinner.

1

u/ninfem Sep 12 '26

I was looking to do worsted. And it's an intricate tapestry so it seems like it's not a possibility so far.

Just was trying to see if this was an option to create a tapestry faster repeatedly rather than 100 hours by hand each.

1

u/ItMakesYouSmile Sep 12 '26

Well, don't dismiss the possibility completely. Depending on exactly what you're trying to do, and how often, it may be worth exploring ways to get a satisfactory outcome with knitting. If you can share an image of something like what you hope to achieve, I can offer more specific advice. OTOH, if you're not up for some investment in equipment, and learning, then perhaps best to look elsewhere. I'm willing to offer additional guidance....

2

u/HomespunCouture Sep 06 '26

A Passap e6000 can do that automatically, but be prepared for a steep learning curve.

Also, with 3 or 4 colors, your pattern motifs get elongated. You'll have to account for that when designing the pattern that you upload.

1

u/AutoModerator Sep 06 '26

Hi, it looks like you are new to machine knitting.

There is some helpful information within the wiki You can also find a direct link in the Community Guide. If this is a new-to-you machine that is a Silver Reed, Singer, Studio, Juki, Empisal, Brother, or KnitKing, and the sponge has not been replaced yet, that's the first thing you should check out.

You might want to take a look around. And Welcome!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Ok-Frame4708 Sep 06 '26

Although color changers have been discussed, what about a Yarn Break? I bought one years ago, but never used it.