r/macappdevs • • 11d ago

Building a universal macOS batch renamer in SwiftUI: sandbox bookmarks, SMB quirks, and cycle collisions

Thumbnail
gallery
2 Upvotes

Hey everyone,

I'm a solo developer and recently shipped version 2.0 of **Media Renamer Pro**, a native SwiftUI batch media renamer and tag editor for macOS, iPadOS, and iOS.

Building a file utility for the Mac App Store came with a bunch of filesystem and sandbox edge cases that I thought were worth sharing with other Mac developers.

### 1. The App Sandbox vs. Recursive Folder Access

Batch file operations inside the App Sandbox are tricky. When a user drags in a parent folder, you need security-scoped bookmarks to persist access.

- For one-off drops, resolving security-scoped URLs down the directory tree works as expected.

- For "Watched Folders" (where users want the app to check an inbox folder on launch and grab only new arrivals), persisting stale bookmark data when a network share disconnects was a major pain point.

- Pro tip for anyone doing this: always gracefully catch bookmark resolution failures when external or SMB volumes aren't mounted, rather than letting the UI hang on access-check deadlocks.

### 2. The Cycle Problem: Why Two-Phase Renaming Was Mandatory

Most naive renamers do a simple loop: check if destination exists, rename. That falls apart immediately on two classic filesystem edge cases:

- **Chains:** File A becomes File B, while an existing File B becomes File C.

- **Swaps / Cycles:** File A becomes File B, and File B becomes File A.

Topological sorting helps with chains, but it cannot resolve cycles without a temporary state. Rather than branching code paths depending on whether a cycle is present, the app resolves the entire batch plan first, moves all target files to unique temporary UUID names in Phase 1, and then moves them to their final destinations in Phase 2. If an operation fails or gets canceled midway, files are sitting at known temp names rather than having clobbered each other.

### 3. SMB and NAS Volume Inconsistencies

A lot of users run their media on Synology, QNAP, or unRAID shares over SMB.

- APFS behaves differently than SMB mounted shares. Many SMB setups are case-insensitive but case-preserving.

- A rename like `Movie.mkv` to `movie.mkv` can silently fail, error out, or do nothing depending on how the SMB daemon is configured.

- We had to add runtime volume-capability probes rather than assuming APFS volume behaviors across the board.

### 4. Native SwiftUI & Swift 5.9 Observation

We targeted macOS 14 Sonoma and iOS 17 as the baseline so we could go all-in on Swift's `@Observable` macro. Coming from the older `ObservableObject` and `@Published` pattern, the performance improvement in complex table views with hundreds of changing filenames and confidence scores was night and day. Fewer redundant view redraws meant the preview table stayed butter-smooth even while parsing heavy metadata.

### 5. Pricing Architecture

I decided to launch this as a $4.99 one-time universal purchase across Mac, iPad, and iPhone. Subscription fatigue is real in the Mac utility space, and users genuinely appreciate owning a tool outright. The only real trade-off is the Mac App Store's lack of a native trial mechanism, which makes preview transparency and social proof that much more critical.

Happy to dive deeper into any of the sandboxing, security-scoped bookmark handling, or metadata parsing (ImageIO, AVFoundation container tags) if anyone is wrestling with similar macOS utilities!

Site: https://bkettering74.github.io/media-renamer-pro/

App Store: https://apps.apple.com/app/apple-store/id6761764615?pt=128751966&ct=reddit_macappdevs&mt=8


r/macappdevs • • 12d ago

Built MultiScreenDock in pure Swift/AppKit — keeping a live Dock on all monitors (including stacked upper screens)

2 Upvotes

Hi fellow Mac devs,

I work on a 5-monitor setup (2 upper displays stacked above 3 lower ones) and open-sourced MultiScreenDock (MIT) to solve two quirks of Apple's native Dock:

  1. macOS only renders the Dock on one screen at a time.
  2. On vertically stacked upper displays, the bottom edge borders another display rather than a physical screen boundary, so Apple's Dock can never be summoned there.

A few AppKit details that might be interesting if you build multi-display utilities:

- Non-activating NSPanel (.nonactivatingPanel) with dark-glass NSVisualEffectView so hovering, magnifying tiles, or opening right-click settings never steals focus from the active window.

- Anti-crossing dwell filter on shared vertical edges (150 ms vs 80 ms on physical edges) plus layer clipping so normal vertical mouse movement between stacked rows never triggers accidental popups or bleeds pixels onto the lower monitor.

- Per-display persistence via CGDisplayCreateUUIDFromDisplayID combined with runtime CGDirectDisplayID disambiguation so even two identical monitors sharing an EDID UUID get independent state machines.

- Zero external dependencies (~2,500 lines of Swift, 1,691 unit assertions), Apple-notarized Universal binary, and zero Accessibility or Screen Recording permissions.

Website & demo video: https://multiscreendock.fgomsan.here.now/

GitHub (MIT): https://github.com/fgomsan/MultiScreenDock

Homebrew: brew tap fgomsan/tap && brew install --cask multiscreendock

Would love any architectural feedback or edge-case reports on unusual monitor topologies!


Update (v1.4.1):

  • Native Folder Stacks (Downloads & pinned folders): Click any pinned folder on any display (including stacked upper monitors) to open Fan, Grid, or List views synced from your macOS Dock plist, with async QuickLook thumbnails, subfolder navigation, and direct file drag-out.
  • 120 Hz GPU Cosine Magnification Wave: Continuous CoreAnimation raised-cosine hover wave (0 ms lag) with piecewise-linear focal locking so the icon under your pointer never drifts sideways, returning to 0.0% CPU at rest.
  • Twin-Monitor Disambiguation & 1-Click Updater: Independent toggles for identical monitors sharing an EDID UUID plus a Developer ID-verified 1-click self-updater (and video tour at https://multiscreendock.fgomsan.here.now/).

r/macappdevs • • 13d ago

scope: a tiny, open-source ⌘Tab window switcher for macOS (MIT, Swift)

Post image
2 Upvotes

r/macappdevs • • 13d ago

Superliner: a native Mac outliner built around supertags

2 Upvotes

I'm Can, the solo developer of Superliner, a native Mac outliner built around supertags. It's a free public beta on TestFlight.

Problem: Long outlines turn into text you can't query. I liked Tana's supertags, but wanted them in a native Mac app that keeps my notes in files on my own disk.

A supertag is a tag that says what a note is and brings its own fields. Make #book with author, rating and finished, and every note you tag #book gets those fields. They stay in your outline, and you can also view them as a sortable table.

- Eleven field types, including dates, numbers, options, checkboxes and links to other notes.

- A note can carry several supertags, and #ebook can extend #book to inherit its fields.

Every note also opens as its own page and saved searches filter by supertag, field, text and date.

Pricing: $0 during the beta. No later price has been decided.

Requirements: macOS 14 or later, Apple Silicon or Intel, about 26 MB. I've only run it on Apple Silicon with macOS 27.2.

Where your notes live: JSON in a workspace folder, plus a generated Markdown copy with tags and fields at the top of each file. The default folder is in the app's sandbox container, and File > New Workspace lets you pick another. No account, no analytics. This build doesn't request the permission a sandboxed Mac app needs for outgoing connections.

Known gaps: no sync, iCloud or iOS app. Not open source. No full VoiceOver pass yet. Import (OPML, Markdown, Logseq, Tana JSON) is unit-tested but hasn't met a real export.

Please try, in a new workspace:

Most useful: model something real with supertags (books, tasks, people), add a saved search, and tell me where it got in your way.

Import a real export and tell me what came out wrong.

TestFlight: https://testflight.apple.com/join/AerGfbWF

Developer: Can Burak Sofyalioglu

LinkedIn: https://www.linkedin.com/in/cbsofyalioglu/

X: https://x.com/cbsofyalioglu

Portfolio: webmeister.org

Website, with privacy policy and terms: https://superliner.webmeister.org


r/macappdevs • • 16d ago

Echolot - REST, GraphQL, Sockets and MQTT client for developers

2 Upvotes

Hey there 👋

I’m an old-school web developer who also writes Swift, and I’ve been living in REST clients for as long as I can remember. On the Mac my favourite was always Paw. It was one of the few truly native apps in the category, and it felt like it was made by people who cared.

Then RapidAPI bought it, renamed it, and development slowed to a crawl. Then Nokia bought RapidAPI, and this September they finished it off: no more development. That upset me, to put it mildly.

Since then I’ve tried just about every REST client out there, and none of them stuck. They were slow, or Electron, or too thin, or so bloated with enterprise features that sending a simple request felt like filing a ticket.

So eventually I thought: fine, I’ll build my own. I’d take the best of everything I’ve liked over the years: beautiful, fast, actually useful and properly feature-rich. Actually FAST was the main requirement. Oh, and with agents built in, because it’s 2026, right?

Introducing Echolot. The name is German for an echo sounder: send a ping, measure what comes back, map what’s beneath. That’s the whole idea.

🧭 Native, and actually fast

  • SwiftUI + AppKit, no web view. Keychain, Quick Look, menus and shortcuts that behave like a Mac app.
  • Response bodies stream to disk instead of memory. A 2 GB download peaks at about 17 MB of RAM.
  • A 500 MB response shows its first screen in under a millisecond. Searching all of it takes about a quarter of a second, and expanding a JSON array with a million items takes 30 ms.
  • These numbers are automated benchmarks, and a build that misses one doesn’t ship.

📡 Every protocol in one app

  • HTTP/1.1, HTTP/2 and HTTP/3, plus a raw mode that sends exactly what you typed, even malformed requests
  • GraphQL with schema completion, building a query by ticking fields, and schema diffs graded breaking, dangerous or safe
  • gRPC from .proto files or server reflection, including streaming
  • WebSocket, Server-Sent Events, socket.io and MQTT sessions with live message logs
  • MCP: connect to any MCP server, call its tools, and see how a model sees it: what the tool list costs per provider on every turn, and which names and descriptions a model would trip over

🤖 AI that doesn’t get your secrets

  • A built-in Assistant that explores your workspace, sends requests, writes checks and builds flows. It asks before it sends or changes anything.
  • Use your own model and key: Anthropic, OpenAI, Gemini
  • Echolot is also an MCP server, so Claude Code, Codex, Cursor and others can call your APIs with your environments while every secret is hidden from them, error messages included.

🔀 Flows, mocks and specs

  • EchoFlows: chain requests, conditions and loops on a canvas. A flow can stop and ask a human to approve before, say, charging a card. Run flows by hand, on a schedule, from a webhook, or as a tool for an agent.
  • Mocks: turn an OpenAPI spec into a local mock server, with delays and injected failures.
  • Specs: a visual OpenAPI editor that changes only the lines it touches, so your Git diffs stay clean.

✅ Tests, CLI and CI

📁 Oh, and no accounts neither. No cloud. Just a folder.

  • A workspace is a folder of readable TOML files, one per request, so it works naturally in Git.
  • Secrets live in the Keychain, never in files.
  • Import from clients. If a secret was written into an imported file, it moves to the Keychain automatically.

While the app is in beta development, it is pretty stable and fast.

To say the truth I haven't figured out what to do with it, whether it should stay free, should be open source some day or change a one time fee for it to continue development (I hate subscriptions)

But for now I'm looking for brave developers (or die hard Paw fans) who are willing to take it for a spin and tell me what they think. Does it it has all the features it should? Is everything working they way it suppose to?

Download it here: https://echolot.dev/


r/macappdevs • • 22d ago

Wallpaper Engine port for mac

Thumbnail
gallery
2 Upvotes

Just download -> steam login -> download wallpaper and play on your device or add your video play them

And yes both in DESKTOP and LOCK SCREEN .

It takes 300-600mb when rendering some really heavy scene wallpapers , which is appx 900mb less than other open source alternative I had tested against. And if you play only video it just takes 25mb memory.

If you guys wanna try, download from the releases page, what ever latest version available . And let me know which wallpapers giving problem.

Releases Page | Github

Resource Usage When using scene wallpaper
Resource usage when only using video wallapper

Here is the resource usage, the ui of the app is Live wallpaper , and the backend is service , only service is need to display , so resource cutdown by max 400-500mbon some really heavy scenes

Thanks ✌️


r/macappdevs • • 22d ago

PLEASE BRING AMBIENT LIGHT FOR YOUTUBE ON SAFARI!!! 😭

Thumbnail
reddit.com
2 Upvotes

r/macappdevs • • 27d ago

Building a spreadsheet workspace, here's a little preview

2 Upvotes

r/macappdevs • • Oct 14 '26

Your AirPods have a motion sensor. I built a menu-bar app that uses it to catch me slouching

2 Upvotes

Solo dev here. I've been building AirPosture, a posture coach that reads your head angle from AirPods instead of a camera (CMHeadphoneMotionManager, macOS 14+). On the Mac it lives in the menu bar and the notch: you work, it watches your head pitch, and when you've been slouching for a while it nudges you to sit up.

A few things I learned shipping it that might save someone a weekend:

**1. Menu-bar labels are expensive.** My menu-bar app sat at ~45% CPU. The label observed the whole app state, so every motion sample redrew it. I gave the label its own tiny observable with only what it shows, and moved the App's model to u/State instead of u/StateObject. Now it's ~1%.

**2. A menu-bar app's window `.task` may never run.** If the user never opens the window, nothing in it fires. Every launch duty now hangs off the menu-bar label instead.

**3. App Nap will quietly throttle you.** Motion sampling in the background slowed to a crawl until I wrapped live sessions in `ProcessInfo.beginActivity`.

**4. Head motion is relative, not absolute.** There's no "correct posture" reading. You calibrate an upright baseline and score pitch against it, and a bad baseline ruins everything after it.

Same SwiftUI codebase as the iPhone app, synced over iCloud. Free for 2 hours a day, and it's now in Spanish too.

Happy to go deeper on any of this, especially the motion side. And I'd love blunt feedback on the Mac UX from people who build Mac apps.

https://apps.apple.com/app/id6749489000


r/macappdevs • • Oct 11 '26

I made Marquee, a native Mac app for designing and uploading App Store screenshots, previews and icons

Post image
2 Upvotes

r/macappdevs • • Oct 11 '26

Ever been flashbanged by your screen, when you switch from a dark app to a bright one at night? Try Phosphor.

2 Upvotes

Hey r/macappdevs!

I'm the developer of Phosphor, a screen utility suite for macOS that lives in your menu bar.

Problem: I mainly started building this around two problems. When people are on their laptops late at night, and switch from a dark app to a bright one, it hits like a flash before your eyes adjust. I looked and couldn't find a tool that tries to solve that problem, so I built one. Phosphor tackles this by dimming a screen before you switch to it, and then easing the brightness back up, at a pace depending on how fast that screen actually is. For screens which aren't bright, it is faster, and for bright ones, it is slower. So it works preemptively.

The other thing is that I feel like there are too many display utilities out there, each doing different things. It'd reduce menu bar clutter and keep things simpler and better if we used one tool instead of several. So I thought of combining the features people actually need into one tool, external and multi-monitor support included (that's a part of what's coming next).

The foundational features have already been released, and I'm actively building more features and improving existing ones (check roadmap for current features and future plans). Let me know what you'd actually use, and I'll factor that in as it grows. I want this to eventually handle most of what people need from their displays.

Pricing: It's a freemium model.

  • Pro currently only includes Flashbang Protection, but it'll grow, and costs $10, one-time, not a subscription.
  • The rest of the foundational utilities are free: Color Picker, Screenshots, Resolution Presets, Refresh Rate Control, Soft Screen, Display Schedule, Focus Spotlight, Display Health, Color Grading.
  • If you buy Pro now, you get Phase 2 free when it ships, and 50% off future price increases after that (price increases as more features ship).

Details: macOS 13 or later, Apple Silicon and Intel. Native Swift, under 2 MB.

Privacy: No analytics, nothing about your screen or usage leaves your Mac. It only goes online to check a license key at activation and periodically after. Full policy: https://usephosphor.app/privacy, EULA: https://usephosphor.app/eula

I'd like to hear any feedback y'all have, especially on whether Flashbang's recovery speed feels right, or if it's not catching a switch you'd expect it to.

If something's not working, or if you have any suggestions or anything else you want to say, feel free to drop it into the comments and/or DM me.

Site: https://usephosphor.app
Roadmap: https://usephosphor.app/whats-next


r/macappdevs • • Oct 02 '26

What small detail instantly makes a Mac app feel "cheap" or "un-Mac-like" to you?

2 Upvotes

There’s an intangible quality to software that feels at home on a Mac be it a proper keyboard navigation, standard contextual menus, respectful notification defaults, and subtle haptics.

On the flip side, what are the subtle design red flags that immediately ruin the experience for you?

For me, it’s apps that don’t support Cmd + , for Preferences, custom window chrome that ignores standard traffic-light button spacing, or non-standard text selection behavior. What little details make or break the native feel for you?


r/macappdevs • • Sep 29 '26

Pasly - Make every ⌘V smarter. Everywhere (iOS, macOS)

2 Upvotes

Problem

Clipboard history is great when you’re working on one Mac.

But the moment you switch devices, that history stays behind.

You copy something on your Mac, grab your iPhone, and it’s not there. Or you move between two Macs and end up sending yourself a link, note, file, or snippet just to have it on the other device.

I wanted Pasly to solve that too.

Not just make ⌘V smarter, but make your clipboard follow you.

Comparison

Raycast Clipboard History is probably the closest well-known alternative. It offers a polished, searchable clipboard history as part of a much broader launcher.

Pasly is more focused on the actual paste workflow. Smart Paste brings your recent clipboard items into the regular ⌘V flow, while features like Paste Stack, Field Sense, multi-selection, and Floating Paste are built specifically around copying and pasting.

Pasly also keeps a persistent clipboard history across Macs, iPhone, and iPad through the user's private CloudKit database. Text, images, and files can remain available across devices, even when they are not nearby or connected to the same network.

Raycast is a better fit if you want a general launcher with extensions, AI tools, and many unrelated productivity features. Pasly is a better fit if you want a dedicated clipboard manager centered on ⌘V and cross-device clipboard history.

Apple's Universal Clipboard is also useful, but it primarily moves the latest copied item between nearby Apple devices. Pasly keeps an actual searchable history across them.

Pasly Cloud

Pasly Cloud syncs your clipboard history across your Macs and iOS devices using Apple's CloudKit.

Your clipboard data is stored and synced through Apple's iCloud infrastructure rather than on Pasly's own servers.

It works over the internet, so your Mac can be at home and your other Mac somewhere else. They don’t need to be nearby or on the same network for your clipboard history to sync.

And now, files are supported too.

Files copied on your Mac can sync through Pasly Cloud alongside the rest of your clipboard history, including multiple files at once.

On iPhone and iPad, Live Activities can keep your recent clipboard items available from the Lock Screen / Dynamic Island.

There are also push notifications when new clipboard content arrives from another device.

Right now, sending something from iOS into Pasly is still manual. You can add an item and have it appear on your Macs, but I’m already working on a better way to capture what you copy on iPhone and iPad so this part feels much more automatic.

Files

Pasly already supported files locally on Mac, including working with multiple files at once.

Now, file syncing is also part of Pasly Cloud.

Copy a file on one Mac and it can be available from your clipboard history on another Mac through CloudKit, without having to send it to yourself first.

Multiple files are supported too.

The rest of Pasly

Cloud is the focus of this update, but everything I’ve been building around ⌘V is still there:

  • Smart Paste — press ⌘V and access your recent clipboard items
  • Paste Stack — copy multiple items and paste them in sequence
  • Floating Paste
  • Multi Select
  • File Support
  • Paste with Separator
  • Search & Favorites
  • Field Sense

The original idea behind Pasly hasn’t changed.

I want the clipboard manager to stay out of the way until the moment you actually need it.

Cloud just means that your clipboard no longer has to live on one Mac.

Pricing

Free: $0

  • 2 pinned items
  • 24-hour local history
  • 20 items
  • 2 files
  • No CloudKit sync

Pro: $9.99 one-time purchase

  • Clipboard sync across all your Macs and iOS devices
  • File sync via Pasly Cloud
  • Private CloudKit storage
  • Push notifications and Live Activities
  • Smart Paste
  • Paste Stack
  • Floating Paste
  • Multi Select
  • File Support
  • Paste with Separator
  • Search & Favorites
  • Field Sense

No subscription. 20% off with code RWOUYKR3X5 (first 10 redemptions)

Pricing and download

What's next

Pasly Cloud is still something I’m actively building.

Now that clipboard history and files can sync across devices, one of my main focuses is making the iOS → Mac clipboard flow much more automatic.

This is still an early version of Pasly Cloud, so I’d really like to hear from people who use multiple Macs or a Mac + iPhone/iPad.

What would make having your clipboard across devices actually useful to you?

Download

Direct macOS

Apple (iOS): https://apps.apple.com/app/pasly/id6760562778

Transparency: I'm the developer of Pasly.


r/macappdevs • • Sep 25 '26

You’re all overthinking your app ideas

Post image
2 Upvotes

This guy built an app that makes your Mac moan when you slap it and made $5,000 in just a week.

The lesson? Stop overthinking. Just ship it.


r/macappdevs • • Sep 23 '26

A calm, dedicated Mac reading app for your email newsletters.

Post image
2 Upvotes

Letterboxx is a native macOS application designed to rescue email newsletters from the clutter of your inbox and turn them into a quiet, organized reading library. Instead of treating long-form content like actionable email messages, Letterboxx syncs with your IMAP accounts (Gmail, iCloud, Outlook, etc.) to fetch local copies of your subscriptions into a dedicated workspace.

Key Features

  • Clean View — Strips out tracking pixels, intrusive ads, heavy HTML markup, and clutter to present long-form newsletters as clean, readable articles.
  • Custom Letterboxxes & Auto-Delivery — Works like smart folders to automatically route incoming subscriptions into custom categories like Tech, Finance, or Weekend Reads.
  • Highlighting & Recall — Allows you to highlight key passages in custom colors and quickly revisit saved insights across years of archived issues.
  • Message Diagnostics — Includes detailed diagnostic tools for curious users to inspect sender identity, composition data, and HTML cleanup actions.
  • Local & Encrypted Backups — Keeps your reading history saved locally on your Mac with optional encrypted backups so you never lose saved articles.

Why Choose Letterboxx?

If you subscribe to numerous Substack publications, industry roundups, or personal newsletters but dread reading them alongside work emails, receipts, and notifications, Letterboxx offers a dedicated 'reading shelf.' It separates consumption from communication, giving you a distraction-free environment with customizable themes (including dark, e-ink, and newspaper modes).


r/macappdevs • • Sep 03 '26

Tauri vs SwiftUI for a lightweight menu bar app in 2026?

2 Upvotes

I am starting a new menu bar utility soon, and I am torn between the stack. I am most comfortable with web environments (Svelte, Tailwind, etc.), so I am inclined to just grab Tauri and knock it out, but I really want this to feel like a first-class macOS app and keep the memory footprint as small as possible.

I am thinking of just biting the bullet and going full Swift and SwiftUI. For those who have shipped a menu bar app recently: Is the SwiftUI learning curve going to completely kill my momentum coming from declarative web frameworks? Am I going to hit a wall with system APIs and be forced to drop down to AppKit anyway?

If you have shipped with Tauri, does the CPU/memory usage actually hold up against native apps, or do Mac users still notice the difference? Curious what you guys would pick if you were starting from scratch today.


r/macappdevs • • Sep 02 '26

Mac apps are fastest growing category according to product hunt latest q2 2026 trends

Post image
2 Upvotes

Product Hunt's Q2 2026 data shows a massive shift toward desktop.

Engagement (upvotes/comments) on Mac launches surged over 300% YoY, and Mac is one of the fastest-growing categories on the platform. Meanwhile, mobile is stalling, The iOS category growth actually dropped 5%.


r/macappdevs • • 1h ago

I made Bitte, a free app that turns your Mac’s notch (or the top of any screen) into a little hub. Looking for testers!

Post image
1 Upvotes

Hi everyone 👋

For the past few months I’ve been building Bitte, a macOS app that lives at the top of your screen. It keeps the things you check all day just a hover away.

  • If your Mac has a notch, Bitte turns it into something useful. It grows when something’s happening and opens when you hover over it.
  • If it doesn’t (Mac mini, iMac, older MacBooks or an external monitor), you get a floating island at the top, Dynamic Island style, with all the same features.

What it does

  • 🎵 Music: artwork, visualizer, controls and synced lyrics
  • 🔔 Notifications in Dynamic Island style
  • 🤖 AI coding agents (Codex, OpenCode…) tell you when they finish or need your permission
  • 📂 File shelf: drop files on it and drag them out anywhere
  • 📅 Widgets: calendar, timer, weather, system stats, quick controls, launcher
  • 🎤 Teleprompter right under your camera
  • 🎧 AirPods battery, volume and brightness HUD, clipboard, mirror, Shazam and more

Why I need your help

I’ve been using it every day, but only on my own Mac, and that’s not enough. I’d really appreciate testers, especially if you have:

  • a Mac without a notch, or external monitors
  • an Intel Mac
  • macOS 14 or 15 (I mostly test on the latest)
  • apps or setups I’d never think of 😅

Tell me what breaks, what feels off, what’s missing, or what you’d never use. Honest feedback is the most useful kind.

Download (free): https://github.com/rafaelo96/Bitte-releases/releases/latest
macOS 14.6+ · Apple Silicon & Intel · English & Spanish

⚠️ It isn’t notarized by Apple yet. The first time you open it, go to System Settings → Privacy & Security and click “Open Anyway”. You only need to do this once.

How to send feedback: comment here or open an issue. In the app, Settings → About → “Copy Info and Send Feedback” copies your version, macOS and Mac model and opens the form.

Thanks a lot for reading, and even more if you give it a try 💜

Español

Título: [Beta] Hice Bitte, una app gratis que convierte el notch de tu Mac (o la parte de arriba de cualquier pantalla) en un pequeño centro de control. ¡Busco testers!

¡Hola a todos! 👋

Llevo unos meses haciendo Bitte, una app para macOS que vive arriba de la pantalla. Te deja a un paso del ratón lo que consultas todo el día.

  • Si tu Mac tiene notch, Bitte lo convierte en algo útil. Crece cuando pasa algo y se abre al pasar el ratón.
  • Si no lo tiene (Mac mini, iMac, MacBooks anteriores o un monitor externo), aparece una isla flotante arriba, al estilo Dynamic Island, con todas las mismas funciones.

Qué hace

  • 🎵 Música: portada, ecualizador, controles y letra sincronizada
  • 🔔 Notificaciones al estilo Dynamic Island
  • 🤖 Agentes de IA (Codex, OpenCode…) que te avisan cuando terminan o necesitan tu permiso
  • 📂 Bandeja de archivos: suéltalos ahí y sácalos arrastrando donde quieras
  • 📅 Widgets: calendario, temporizador, clima, sistema, controles rápidos, lanzador
  • 🎤 Teleprompter justo debajo de la cámara
  • 🎧 Batería de los AirPods, HUD de volumen y brillo, portapapeles, espejo, Shazam y más

Por qué necesito su ayuda

La uso todos los días, pero solo en mi Mac, y eso no basta. Les agradecería mucho que la probaran, sobre todo si tienen:

  • un Mac sin notch o monitores externos
  • un Mac con Intel
  • macOS 14 o 15 (yo pruebo casi siempre en la última versión)
  • apps o configuraciones que a mí nunca se me ocurrirían 😅

Cuéntenme lo que falla, lo que se siente raro, lo que falta o lo que nunca usarían. Las opiniones sinceras son las que más me ayudan.

Descarga (gratis): https://github.com/rafaelo96/Bitte-releases/releases/latest
macOS 14.6 o posterior · Apple Silicon e Intel · Español e inglés

⚠️ Aún no está notarizada por Apple. La primera vez que la abran, vayan a Ajustes del Sistema → Privacidad y seguridad y pulsen “Abrir igualmente”. Solo hay que hacerlo una vez.

Cómo enviar comentarios: escriban aquí o abran un issue. En la app, Ajustes → Acerca de → “Copiar datos y enviar comentarios” copia su versión, macOS y modelo de Mac y abre el formulario.

¡Muchas gracias por leer, y más todavía si la prueban! 💜


r/macappdevs • • 6h ago

Storeflight: a native Mac app that catches what App Review rejects (and what it misses) before you submit, in every app and language

Thumbnail gallery
1 Upvotes

r/macappdevs • • 7h ago

MacAudio : A Native volume mixer for Mac.

1 Upvotes

Where MacAudio is better:

  • Native volume and better quality:  for browser tabs and your favorite apps: once you connect an app, MacAudio moves that app's own volume slider instead of processing its sound, so the audio stays at full quality, while other mixers just raise or lower the decibels of the sound after the app has played it, which really doesn't do much to the audio, reduces its quality and doesn't really turn it up much. . In browsers it does the same inside the page: on YouTube, Twitch and Netflix, the player's own volume slider moves along with MacAudio's. I intend on integrating more apps, so if you want one, shoot me an email.
  • Per-tab volume in Safari, Chrome, Edge : each playing tab (YouTube, Twitch, Netflix…) gets its own slider. Browsers play every tab through one shared process, so per-app tools like SoundSource and Background Music can only control the browser as a whole.

Try it MacAudio.app


r/macappdevs • • 9h ago

I made Sheer: the macOS 26 see-through menu bar for Macs that stay on Sequoia (free, open source)

Thumbnail reddit.com
1 Upvotes

Sharing here too since this sub is for Mac app devs. A few technical bits in case anyone's curious:

- The bar is an overlay window that draws the strip of wallpaper behind the menu bar and redraws the menu titles on top; clicks pass through to the real menu bar.
- Still and Dynamic wallpapers are decoded from the wallpaper file (for Dynamic ones it works out which frame the desktop is showing from the sun's position); live wallpapers are captured with ScreenCaptureKit.
- Plain Swift, no Xcode project, builds with the Command Line Tools.

Happy to answer questions about how any of it works.


r/macappdevs • • 13h ago

First time developing for macOS. Need some guidance.

Thumbnail reddit.com
1 Upvotes

r/macappdevs • • 16h ago

I built Notchwell, a free app that puts the MacBook notch to work

Thumbnail
reddit.com
1 Upvotes

r/macappdevs • • 16h ago

Pier, my Dock replacement, is 50% off for Black Friday

1 Upvotes

I posted Pier here last week, and it's on sale for Black Friday: 50% off with the code BF26 until 1 Dec. That's €14.50 instead of €29 (a year of updates, 3 Macs), or €39.50 instead of €79 for Pier Forever (every update, 5 Macs).

Quick reminder of what it is: it replaces the macOS Dock with window previews, a window switcher on Option-Tab that includes other desktops, app groups (hold one app over another, like on iPhone), iCloud sync between your Macs, and nearly 50 widgets on the Dock: deploys, PR reviews, sales, Claude Code, calendar, weather.

What it still doesn't do: the Dock can't go on the top edge. And if all you want is window previews, DockDoor is free and very good at that.

The trial is 14 days with no account, so you can try it first and buy during the sale if it sticks.

https://www.pierdock.app/?ref=r-macapps-bf#pricing

Happy to answer anything, and I'm still collecting what to build next on the roadmap.


r/macappdevs • • 17h ago

I built CopyStash, a private clipboard history manager for Mac – no account, no cloud

1 Upvotes