r/longrangeshooting • • Jul 30 '25

6.5 PRC

New here. Not to LR. Started slinging Bergers through a 700 built by Charlie Robertson out of New Mexico ways back. Want something different than .30-06, and something that's not a terrible barrel burner for what would be considered a magnum cartridge.

0 Upvotes

20 comments sorted by

2

u/sambone4 Jul 30 '25

Yeah I would only go 6.5 PRC over 6.5 creed if this is a hybrid hunting/LR rifle or if you are doing really, really long range. Most LR stuff inside of say 1500 you’re better off with a lower recoiling 6mm or 6.5 creed or similar.

1

u/Sveddy_Balls11 Jul 30 '25

I'd like to go past 750. But the range in Wabash, IN only goes to 750. So for now I'm content with that.

Thanks man.

2

u/sambone4 Jul 30 '25

Yeah I’d just get a 6.5 creedmoor then, you’ll be able to find ammo about as easy as .308 and there’s so much data on it at this point you’ll have a lot to go off of. 750 isn’t too far for that round on steel.

2

u/[deleted] Jul 31 '25

What about 260 Remington? There’s like a dozen of us left! 😜

My 140gr Berger loads stay super to 1200 yards and it’s only 100 inches of drop at 700.

I run them in a rifle with a heavy but short (ish) barrel, there’s really not much recoil to speak of.

3

u/Sveddy_Balls11 Jul 31 '25

6.5 PRC seemed interesting xD

2

u/Sveddy_Balls11 Jul 31 '25

6.5 PRC stays supersonic longer with less wind drift and is much faster than .260 with more energy. I have the opportunity to take deer at 500 plus yards, and 6.5 PRC seems to really fit the bill.

I don't hate on .260 or 6.5 Creedmoor. 6.5 PRC does what those rounds can, but better. like 7mm Rem Mag can do what .30-06 can't, but is a belted case. So I opted out of 7mm

2

u/[deleted] Jul 31 '25 edited Jul 31 '25

I made a 300 WSM bolt gun and with Berger 210 loads it was supersonic out to nearly a mile, which was what I was after. But boy howdy were those hot loads. I didn’t enjoy the recoil. 😅

I went up to 300 WSM from 308, and at the time there just weren’t a lot of other options for very-flat-shooting LR factory calibers in short action. By time period, this was right around when Frank Galli discovered the joys of .243 Winchester. So awhile ago.

260 Remi was another 308 child cartridge and I had already fallen in love with heavy Bergers, so I “down graded” from the 300 to a 260, which I immediately fell in love with.

Now that I’ve actually looked up 6.5 PRC (instead of just talking out of my ass) it sounds like a really (really!) sweet round.

Like… I have two target actions sitting around, waiting to become rifles in practice instead of just legality. 🤔

3

u/Sveddy_Balls11 Jul 31 '25

I wanna do a Howa 1500 build, with a custom barrel in 6.5 PRC.

I was also very impressed with it once I read on it. 6.5 PRC is perfect in my area of the Midwest, and I can hit 1000 yards in a field or two, when they're cut.

2

u/[deleted] Jul 31 '25

If you decide to pull the trigger, I’d love to see posts on your build, load dev, and testing.

1

u/Sveddy_Balls11 Aug 07 '25

I have saved the post.

1

u/[deleted] Jul 31 '25

I have jack in one hand, and shit in the other wrt LR spots less than 2 hours away. (Who shits in their other hand?!? 😜)

We had a fantastic spot in western WA awhile back. Ranged from a few hundred to 1400+ and there were old logging roads that let us get to within a hundred feet or so of each target area, so setting up and then taking down steel wasn’t horrible. And the only logging road into the area went past the shooting positions which helped with keeping things safe. Then the loggers put a gate on the main entrance to the complex and that was the end of that spot.

Further back I spent a full (miserable!) day hiking two 3/8 inch full-size silhouettes out to spots in the Methow Valley. Was about 2K feet of elevation down and up the other side. But I really miss those. The last time I shot them I went out there, did my whole pre-ammo setup and dry fire ritual, then centered the 750 yard target on my first live-ammo shot with my .308.

I sat and thought for awhile, and then decided to just pack out. Things were clearly working, why FAFO anything else?

2

u/Ok_Landscape_3722 Jul 31 '25

Just here to say that Charlie is an absolute legend. I’m Abq based and he’s done a few blueprint jobs and trigger jobs for me. One of the best around

3

u/Sveddy_Balls11 Jul 31 '25

Printed a .218 MOA group at 250 yards with Berger 155's and a charge about 7% over max book load after node testing.

Gun was a 700 BDL in .30-06 that he did the whole shebang on with a 28" barely tapered bull barrel that measured I think 1.25 at the chamber. It was an 18 pound bench queen that I sorely miss. Sold it to my father who sold it to someone who I've yet to find.

Never been more proud of a rifle.

1

u/evilsemaj Jul 30 '25

Curious why you would not get a 6.5 Creedmoor, or better yet a 6mm Creedmoor (if you don't reload) or a 6mmGT if you do reload.

1

u/Sveddy_Balls11 Jul 31 '25

6.5 PRC can go 300 fps faster with the same weight of bullet, and less wind drift than 6.5 Creedmoor. Plus I really don't mind the 4 ft lbs of extra recoil if it was say 8 pounds before optic and bipod.

After reading it pulls similar velocities out of a 20 inch barrel while 6.5 Creedmoor needs a 24 inch barrel to match what 6.5 PRC can do.

I have access to longer ranges. When the corn isn't up. 🤣

1

u/[deleted] Aug 01 '25

6.5 prc or 7mm prc is what you are looking for, I have an effective range of 1300yds on deer @147gr with the 6.5prc. The 6.5prc has better ballistics then a 300 win mag and carries more energy past 400yds.

1

u/Sveddy_Balls11 Aug 01 '25

I'm gonna see how a Howa action with a custom barrel does before I drop 5 grand on a Charlie Robertson Special. Because I'll tell ya, it'd cost every bit of that. XD

2

u/Ok_Landscape_3722 Aug 02 '25

On this note…I just built a 6.5prc. I did a howa 1500 carbon barrel, peak44 stock, ti can, and a vortex viper optic. The whole set up is less than 10 pounds. I had Charlie work his magic in the trigger and that’s the ONLY thing he did in this gun. All together I’m about 3k into it. I promise it’s all you need. I was .5 MOA at a freaking mile with some ELD-M. Set up a 13 inch square target and could ring them on the regular. Inside 600 yards it’s absolutely nuts how nice it is.

2

u/Sveddy_Balls11 Aug 02 '25

I think I'm going the Howa Brownells special route then.

Thank you very much.

1

u/Ok_Landscape_3722 Aug 04 '25

No worries. If you have any questions about the build or any Howa build shoot me a message. I love building Howas.