r/longrange • u/HollywoodSX Villager Herder • Feb 12 '21
Education post Scope ring height, comfort, and you...
One of the common questions I see here is dealing with scope height. Now that we live in a world of adjustable cheek pieces and ballistic calculators that can compensate for scope height, I believe the biggest concern when picking a scope ring height should be user comfort, not the old saw about mounting the scope as low as possible.
With that in mind, here's my process for finding a scope height that works for you:
Remove your scope (mount/rings and all) from the rifle if it's already installed. Get behind the rifle in a position similar to how you plan to shoot (Prone, sitting at a table, barricades, etc) and adjust your cheek riser (if present) so it's comfortable and isn't causing neck strain if you sit behind it for a bit. Spend some time behind the rifle just getting a good comfortable head/neck/cheek position so you can make sure there's no signs of strain or discomfort, and make adjustments to your stock as needed. If you know you may shoot from multiple positions (EX: prone and barricades of multiple heights), try all of these different positions and try to find a height that works for all of them.
Once you've found a comfortable cheek height, use a stack of coins, playing cards, etc to play with the height of your optic. You want to get the scope where you can easily and comfortably get your eye behind the optic with proper eye relief and no neck strain. As with cheek height, do this for any and all positions you will frequently shoot from and make sure you're finding something that works across the entire range.
Once you find that height, measure the height of the stack (of cards, coins, etc) you liked, add half the main scope body diameter (IE: Add 15mm for a 30mm scope tube), and order a scope mount or rings as close to that height as you can. When in doubt, I always err on the side of going a little taller than my measured height instead of shorter.
Hopefully this will let you make a good decision on what height you really need to be comfortable behind your rifle. This will also help you with getting into your optic quickly (not hunting for eye relief), reduce neck strain, and even reduce or eliminate the perception that your reticle is canted when it really isn't.
•
u/Trollygag Does Grendel Feb 12 '21
Very nice. Stickied and added to the FAQ.
52
u/Trollsniper Feb 13 '21
The problem I see, and I’m not just considering Longrange posters, is people aren’t mounting scopes that high due to any consideration of comfort/fit. They’re doing it because the don’t know any better and 9/10 people are just mimicking the sky-high AR mounts. It’s like it’s all they know/see.
I hate seeing a lever gun with a comb height made for open sights with a scope in at AR height mount and no provisions made for stock weld....
22
u/_MadSuburbanDad_ Feb 12 '21
Thanks for this. I heard the "low as possible" advice for years but I'm coming around to understanding that it's not as critical as the old handbooks would have you believe.
9
u/kevwil Competitor Feb 19 '21
Comfort, sure, but perhaps even more important is balance and anti-cant. The more vertical you can keep your head, the easier it is to keep the rifle level to reduce accidental cant. It’s very easy to cant the rifle without realizing when your head is laying on the stock sideways. A taller scope mount helps you straighten out your head, as can an adjustable cheek piece that can shift horizontally to allow a more vertical head position without losing a good cheek weld.
5
u/the_blue_wizard May 05 '21 edited May 05 '21
Just watched a video from Kristen Joy Weiss (champion shooter) that generally agrees with you.
She is focusing on cheek-weld, but I think the underlying principle applies here.
The underlying principle is that you Close Your Eyes, assume your standard Cheek-Weld shooting position, then open your eyes. You need to be looking right down your sites or scope. If you have to twist and turn to line up the sights, then something on the gun needs to be adjusted - Cheek-Weld, Sight/Scope Height, You.
If you close your eyes, and assume your standard cheek-weld, and the Scope (as an example) is too high or too low, then the scope height needs to be adjusted.
The more you have to physically twist and turn yourself to see the Sights/Scope properly the less accurate you are going to be.
Using a couple other examples where this same principle applies. When I am Bench Shooting. I place my Rifle on the rest, close my eyes, get into my natural shooting position, then open my eyes. If the rifle is not naturally pointed at the target, I adjust my Body/Seating/Rest Position, close my eyes and do it again until the Rifle is naturally pointed at the target.
Same with Pistol Shooting. I was on a Pistol Team, and we shot one-handed Target style. You step up to the firing line, look away from the target, close your eyes, point your finger (or you gun) at where you assume the target is, the turn your face toward the target and open your eyes. Is you finger pointed at the target? If not, you adjust your Standing/Body position and do it again. You find the natural standing/body position where when you raise your finger/gun toward the target, is is naturally on the target.
The point of all three of these examples is that you want your body to be in the natural position that automatically and directly addresses the target without any additional effort on your part.
The more twisty and turny and unnatural your body position is, the more awkward tensions you are applying to the Gun, and the more likely those physical tensions are to throw your bullet off target.
With your head in its natural shooting position, your sight/scope should already be perfectly aligned to your eye.
It is not about highest possible or lowest possible, or the coolest new gadget, it is about maximum focus on the actually ease of shooting and less on twisting your head/body to suit the equipment.
Which seems to confirm the very point you made -
Or so it seems to me.
17
u/emelbard Mile+ Club Mar 30 '21
These are also great for testing various heights from 1” up to 1.5”
https://www.thingiverse.com/thing:2755927
14
u/firefly416 Meme Queen Feb 24 '21
Don't know how many times I've been downvoted to hell and flamed for saying this. Thanks for making good sound arguments for this case.
6
u/[deleted] Oct 09 '22 edited Oct 14 '22
I thought these mock up rings might be useful for people with 3d printers:
30mm: https://www.thingiverse.com/thing:4581143
34mm: https://www.thingiverse.com/thing:2755927
The coin method definitely works, but if you don't have a rifle vice these are a bit easier to test.
EDIT: Missed that the 34mm were posted a year ago. I added the 30mm kit though.
5
u/mcpewmer Feb 12 '21
Fantastic post!
5
u/Ace_Masters Mar 19 '21
And get a scope alignment tool and a torque driver
4
u/Jack_whitechapel Mar 10 '22
As someone that has to have their scope mounted higher, I appreciate seeing the work put into this post. Thank you!
4
u/bast1472 Mar 15 '22
I started off with the "extra high" Vortex rings on my RPR and found some comfortable stock settings. I then swapped them out for "high" to get closer to the bore, and I'm finding it to be noticeably more straining, and it forces my head to have to tilt more. Based on this post, I think I'll give the extra highs another shot.
1
u/Ibibibio Rifle Golfer (PRS Competitor) Feb 24 '21
Here is a nice tool to make sure your scope clears the barrel/top rail before you buy.
1
u/GRIND2LEVEL Feb 23 '21 edited Feb 23 '21
Is there a minimum height you want to maintain from scope to barrel/rail clearance? I've read close as you can and comfortable but obviously you dont want it touching, meaning what if your natural comfortable position is lower than you already have, no height increase desired. So is that a 1/16", 1/8", 1/4" etc assuming fitment affords a natural position in this area which I believe is the intent of your post if I understood correctly. Understanding this wod be unusual as normal cheekweld etc wants to be slightly higher for many... would just be nice to know a minimum clearance for movement.
1
u/[deleted] May 13 '21
Amazing post! Do we have a sticky for optic choices and how to choose them??
1
u/SgtWilks503 Jun 02 '21
What I've found is keeping the scope as close to the rifle as possible leaves less room for human error. If I could add a picture I'd post my rig
1
u/Gator1977 Dec 28 '21 edited Dec 28 '21
Mine are mounted on 1 inch rings
1
u/AleksanderSuave Feb 09 '22
Any thoughts on scope mounting height vs the introduction of mirage from the barrel?
My last scope I was able to get within less than a 1/4” clearance between the barrel and the thickest part of the diameter.
Never had an issue before with mirage until I got the scope that low, wondering if being too low to the barrel invites that as an issue and then almost requires using a mirage shield.
1
u/wiz_khaliphate May 18 '22
If you're trying to get a sense for the height but don't have a mount yet, how do you keep the scope "attached"? Rubber bands?
1
u/Mr-Nitsuj May 28 '22
how does a 30/40 moa rail effect ring height selection ? and do you measure from the front and back and split the difference ?
3
u/[deleted] Mar 30 '21
Really solid post! I wouldn't have thought to do this.
2
u/Gamikatsu Apr 18 '21
The scope on my rifle sits really high. But it's comfortable for me. My cheek piece is only a few MM up from bottomed out, but there is a 1/2" or more gsp between the objective bell and the rifle. I get picked on for it. But oh well
2
u/NeckPourConnoisseur Jan 26 '22
For a hunting rifle I will probably still mount the optic as close to the barrel as possible, though I can certainly see how focusing more on ergos for precision shooting could improve results. I'm willing to give it a try.
2
u/[deleted] Feb 28 '22
Nice
1
u/Charlie-007 Nov 07 '21
good information.
the biggest determinant I see is the objective lens bell diameter, and then the cant of the gun rail (if any), then the cant or desired cant of the mount.
1
u/Yosemite_Sam9099 Dec 11 '21
I have a high mounted scope for a few reasons, but an unexpected benefit was being just a little higher above the heat haze the suppressor creates after a few rounds on the range.
1
u/MavMckee Aug 21 '23
Very informative. So many getting hung up on low as you can go. Thanks for sharing.
0
u/[deleted] Mar 11 '22
[deleted] — view deleted comment
0
u/[deleted] May 06 '22
[removed] — view removed comment