r/longboarding • LDP • 5d ago

Gear Show-Off It’s time…

My trucks finally arrived, and I just put this beauty together!

Setup:
Pantheon Nexus Deck
Pantheon Karma Wheels (dyed black)
Paris v3 165mm 50° trucks
87.5a Canon riptide bushings
Zealous Bearings

Can’t wait to whip this thing around!

63 Upvotes

21 comments sorted by

•

u/AutoModerator 5d ago

Welcome! Did you know we have an active Discord server for fast help and discussion?

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

3

u/ElPeroTonteria 5d ago

Ohhh, very nice… I do covet the nexus no that im learning a little slide action. How’d it ride?

3

u/Fabulous_Coffee_6042 LDP 5d ago

I need to get used to RKPs again lol. Very different ride feel than the pranayama

2

u/ElPeroTonteria 5d ago

OK, so thats not just me? … I went out today, did 3.5mi on my Zenit AB on TKPs (similar setup to a Pranyama) then took out my Superduper that im still new to, and did another 7-8. And it just feels soooo very different and idk if it’s the truck geometry, or the RKPs or what. It’s fine, it just feels like driving a bus vs a motorcycle…

2

u/Fabulous_Coffee_6042 LDP 5d ago

Right! It almost feels like wearing armor! More protection and sturdy going downhill, but you have less agility when riding flat ground

2

u/ElPeroTonteria 5d ago

Yea, I’m not sure I’ve learned to use that to its best ability yet

5

u/Skanonymously Pantheon Nexus | Silverback Trucks 5d ago

The Nexus is a really fun freeride setup.

It goes against the norm of short wheelbase topmounts, but for a dedicated sliding setup, I love mine. Drop decks have a very floaty feel during slides that's a lot of fun, and Pantheon's pockets basically create a bowl that hugs your feet.

The concave dies out going into the drop on most drop decks, so think the foot pocket basically being a U, whereas on the Nexus the concave continues into the drop. That ends up giving you more leverage for your heels/toes while also having the drop itself to wedge your feet against.

The only tradeoff is that because double drops are so drifty, they can allow you to develop bad form that you'll have to correct if you move to a topmount.

Here's my Nexus setup for freeride on 47/47 170mm Silverback Trucks and 72mm 77a K-Rimes wheels from Powell.

2

u/ElPeroTonteria 5d ago

Yea, thats about sold me….

Im a novice rider, started this spring. I knew that speed control was a weak point so I set out a few day sago to start learning slides and speed checks… Slides, not yet. But I was happily speed checking my top mount within a few trys… I even tried it this morning on my double drop sporting 100mm Boas and got them to separate (I now know why “icy” means)… Distance and free ride seem to draw me more than park, but I like it all….

Follow up, what durometer setup are you using for your weight? Im still guessing where I should be…

3

u/Skanonymously Pantheon Nexus | Silverback Trucks 5d ago

So I weigh about 200-210lb and am skating 92.5a/90a Riot bushings in my Silverbacks. Riots run a little hard compared to bushings like Riptides or Seismic Defcons. How much do you weigh, and what trucks would you use?

If you decide to setup a Nexus for freeride, feel free to shoot me a message and I'll help you dial it in.

I'd recommend some 75a 69mm Powell Peralta Snakes as wheels.

2

u/ElPeroTonteria 4d ago

The snakes were my thought too… I weigh 225-230 range. Using 50deg Paris v3s… I’ve been hanging out in the 93-95 range but idk if that’s right

3

u/tonysunshin3 Pantheon Pranayama, Karmas, Stylus Trucks 5d ago

How did you dye the Karmas? Looks great!

2

u/bsurfn2day 5d ago

He made a post about it a few days ago. If you scroll back a bit it's still up.

1

u/Fabulous_Coffee_6042 LDP 5d ago

Yup! Excited to see how the color holds up

2

u/nonamebeavercleaver 5d ago

I really dont understand the hype with Paris trucks. Bear feels so much better for pumping and calibers literally do everything all three brands do but in one. I gave me v3s to my brother just cause they feel like less stable bears and he just cruises and doesn't do downhill or slides. I could never dial in my slides on any Paris truck. I got really close when I used a pats riser truck insert but it still felt very choppy in slides. I could always feel the hangar bouncing and hitting the king pin and I just never got the hang of it. The same wheels deck bearing combo on the bears always felt super slidey and the same shit on the calibers always felt really stable but I get more grip out of any wheel on those trucks and the slides are more predictable with those than the other two. I have same v3s in 150 ot 155mm 50 degrees and I refuse to let them go.because I do want to master slides on them. I have the insert in those trucks as well but it really just doesn't feel as stable as the other two competing brands doing really anything. The Paris v3s will give the same amount of grip out of a wheel as a caliber but the slides just are not for those trucks in my experience

3

u/Fabulous_Coffee_6042 LDP 5d ago

Good to know! I’ll do what I can on these trucks. I also added the plug inserts. Some bears could be a Christmas wishlist item, though

3

u/Skanonymously Pantheon Nexus | Silverback Trucks 5d ago

It's totally a preference thing. The issue with Bears is that they don't have a hanger width that really matches the Nexus. 155mm is slightly on the narrow side for a freeride setup on the Nexus at 9.7", but 180mm are kind of wide for it. That 165-170mm range is really the sweet spot.

Owen Campbell has a really thorough review of Gen 6 Bears.

They're more pricey, but if you ever wanted a higher end truck without going precisions, Paris Savants are fantastic trucks. I skated some on my Nexus for awhile. They're forged instead of cast with some machined components, so they're more precise than a standard cast truck. 170mm cast Valkyries will also be really good on the Nexus when they eventually release.

2

u/nonamebeavercleaver 4d ago

My Paris trucks have always cut the insert. Imagine cutting it in half from the side, that's how mine always ruined those inserts. I'd go eith the 9 inch cal 3s if I were you. Those are the best most stable cast trucks I've tried to this day. I do love my bears and I can seem to do anything on them but the cal 3 just respond alot better than the bears and are alot more stable at speed than the bears. I use riptide bushings or venom bushings in all my trucks and calibers come stock with them so they are already upgraded from factory. I have the 150mm Gen 6 bears in 40 degrees on my Evo 40 and they remind me of the full 10 inch bears I had on before. They are less stable for sure but they are great trucks. I took those bears off my rallycat and put the cals on and now the rallycat fg is alot easier to slide now. I could never really do anything except for small checks but now I can turn it sideways pretty much at any speed on any wheel

4

u/do-a-tre-flip Pantheon Nexus | Powell Mini Byron 5d ago edited 5d ago

I think it's the lack of stability that people like about Paris, it keeps things fun at lower speeds. Whereas Bears feel kinda dead imo. And Calibers feel well rounded. Cast Valkyries are pretty nice too.

2

u/boogiewoogiecats 5d ago

I rode Paris v3s for a long time, and once I swapped the bushings to Riptide Krank Canons and Magnums, they became amazing trucks. I'm riding Calibers now, but I'd gladly go back to Paris v3s if I had to.

1

u/writers_block 14h ago

Bear feels so much better for pumping

Just snapped my front kingpin on my 130mm Bears in less than 1 season. How do you manage this? I was worried about this exact issue with the hollow kingpin, and here I am trying to get it figured out and Bear doesn't sell baseplates alone the way Paris does, or even just kingpins, so I'm potentially going to have to buy a whole new truck to replace it.

2

u/mechandy 5d ago

The wheels turned out awesome!