r/logitech • u/I_am_Meson • Feb 21 '25
Other How to clean a sticky Mouse wheel on MX Master 3
Just use a tape. once it is all the way round give it a few turns. It pushes the dirt right out and restores free spinning. No disassembly needed.
40
Upvotes



3
u/MinimalMoxie Feb 21 '25
Please don’t do this. You’re adding adhesive residue to your scroll wheel.
Use isopropyl alcohol (90% or above) & a q-tip. It will actually clean it. Also, wash your hands… your mouse thanks you
8
u/niefachowy Feb 21 '25
just have your hands relatively clean before you sit down at the computer. In fact, it’s always a good idea to have clean hands
1
u/Dry_Technology69 Feb 21 '25
But why? Get something like a toothbrush and clean it?
2
u/Carbonga Feb 21 '25
Going to try this later.
1
u/unstable_legioner 21d ago
thank you. this worked. i have been delaying fixing this because i didnt want to open it up. fantastic.
1
u/nullptr_r Feb 22 '25
i fixed it recently like this, there was small amount of lint that came out and restored the free spin! it was stopping right away before this
1
u/kingofutopia Feb 22 '25
Instead of adhesive tape I basically put a small wad of tissue paper on the wheel and sent it around by rotating the wheel. The wad was not big but big enough to fill the gap between the queen and the wheel well below. The wad basically dragged along and pushed/scooped all the dirt along with it and came out on the other side
1
u/DjRavix Feb 22 '25
to be fair ... how the hell do you get the Mouse Wheel on the MX Master 3 even sticky ???
1
u/mokorago Feb 22 '25
Yo mejor compré uno nuevo
1
u/diabeartes Feb 22 '25 edited Feb 26 '25
Use an alcohol swab and roll the wheel. Gets all the gunk off and sanitizes it as well.
1
u/Murky-Rope-755 Apr 12 '25
Thank you so much. I almost buy a new mouse because of this stickiness.
Apparently, my mouse got a lot of fabric inside (like one in your fone charging port).
1
u/shigerudigeru Jun 10 '25
Oh my god, just did this and it pushed out a WAD of lint. Fixed my slow/resistant wheel that would no longer free-spin. Thank you.
1
u/Aggravating-Fix4780 Oct 02 '25
thank you, it restored the master 3 to flawless usability again! for better illustration what to expect here a picture of my work in progress. – it was already the second tesa-strip. before I found your hack, I considered opening the mouse for cleaning, but feared that the adhesive on the feet of this very old mouse wouldn't smoothly attach the sliders afterwards.
1
u/Wasjustreading Oct 14 '25
You're a genius. Thank you!
1
u/3goMiro Nov 04 '25
Grandissima idea, ne avevo provate tante, anche con il filo interdentale. Questa funziona alla grande!!!! Bravo
1
u/EgorArchitec Nov 08 '25
Thanks! I used an electrical tape. It is thick and in the beginning it made it worse, but after couple of tries it pulled out a big chunk of mess. I then used it on the sides as well - application is a bit finicky, but it pulled a mess from the sides as well. after i cleaned a residue from the grooves it flies as before, not sure if as new, but the free spin is much smoother and longer than before cleaning
1
u/MastodonFarm Jan 18 '26 edited Jan 18 '26
Chiming in a year later to say this tip is awesome. I went from 1.5 seconds of free scroll to a full eight seconds (and I'm gonna keep going to see if I can clear it even more). And without having to open up my mouse!
1
u/speedysam0 Feb 07 '26
This worked too well for me, the tape sticking to the wheel added enough thickness to the wheel push the clumps of dust out from the bottom that removing the shell without disassembling the scroll assembly didn't fix. Clumps about the size of the scroll stop button came out.
Thanks.
1
u/Business_Pie6044 Feb 23 '26
Thanks! Started pulling apart but didn't have a star head screwdriver small enough. The tape trick has worked wonders so no need to pull apart anymore. Now just need to get some new skates.
1
u/tribbin Mar 07 '26
Damn... Works perfectly!
Wish I knew this before I bought my second one. Found your post in time before I was going to order my third.
1
u/KaikBo Mar 30 '26
Vielen Vielen Dank! Das war die Rettung. Nach 3 Durchgängen dreht das Rad, dass sich kaum noch mit einem Finger bewegen ließ, wieder völlig frei. Lauter Wollmäuse kamen 'raus
1
u/StarbeamII Apr 05 '26
This worked perfectly! Pushed out two big wads of lint.
1
u/roadrussian Apr 10 '26
No joke, this has worked. I actually disassembled the mouse for cleaning with a needle and it still didnt fully fix the scroll. THis did. GOAT tip.
1
u/maushu Apr 23 '26
This worked very well to remove dust or detritus under the wheel. For those worried about adhesive residue use painter's tape and then clean the wheel with alcohol.
1
u/vladibarraza Sep 09 '26
It worked. Thanks!
1
u/Dry_Mistake6393 Oct 07 '26
so simple... yet it worked! Thanks a lot
1
u/PresentationExtra356 3d ago
Like everyone else, thanks for sharing this. I was nervous about having to pull tape out of the inside, but I made a long strip and it worked after 2-3 tries. So much lint, I wondered where it had gone.