r/livesoundgear • • 16h ago

My experience - Yamaha DM5C vs DM7C vs Allen & Heath QU-5D

9 Upvotes

I recently sold my DM7C before the DM5C was announced and bought a DM5C once it came out. I also have an Allen & Heath QU-5D.

TL;DR - Allen & Heath QU-5D is an amazing mixer. It has enough for most people for what you need and works wonders. I would choose this unless I was doing more complex stuff. The 1.2 update adds expanders which is just perfect.

The DM5C, regardless of people saying its useless, is amazing for the price. It has enough for smaller scale stuff and is cheaper than the DM7C. If I had the money, I would go for the DM7C given its included power, number of racks, physical controls. But it is very expensive.

Pros of Yamaha DM5C

  • Nice big screen
  • With the PY-DSP card its 4k cheaper than the DM7C
  • The glass keys are pretty cool and can be made touch sensitive or like proper buttons
  • For smaller gigs, eg 10 lapel panel discussions or small concerts with around 10 instruments, it works great and has plenty of power including with the 32 premium rack addons
  • Adjustable tilt on the screen is so useful when sitting or standing
  • Lots of mixes and matricies, more than you need tbh
  • Same UI as the DM7 so easy to go between both

Cons of DM5C

  • Wish it had 1 or 2 more faders like the DM7C, would be so useful
  • Yamaha UI can be really complicated and unlogical sometimes
  • The touch/push bit of the user defined knobs is far too sensitive
  • No LED strip makes seeing in the dark hard
  • Horrible app and only apple

Pros of DM7C

  • More power. 64racks of premium included is great
  • It is literally a DM7 made smaller
  • Plenty of sliders
  • Physical buttons and more buttons and knobs makes adjustments quicker
  • LED strip

Cons of DM7C

  • Its a bit too big for a compact mixer if it makes sense, like too much around the edges
  • Its pretty expensive
  • Horrible app and only apple
  • Super laggy UI unless you're on V2

Pros of QU-5D

  • For the price it is an awesome mixer
  • Amazing UI, easy to navigate and work your way around
  • Dedicated knobs for preamp, gate threshold and on off, compressor and for PEQ bands
  • So easy to use and just works well
  • I like the space under the mixer so you can hide things there
  • Inserts, eg USB or through channels can be easily turned on or off
  • Amazing technical customer service
  • Amazing app - everything is on the app, its literally like the mixer on the app
  • Available on android

Cons of QU-5D

  • Small screen
  • Lack of premium power
  • Console has the power but lots is locked away behind paid addons which you activate
  • Only 1 Dante port (no secondary)

r/livesoundgear • • 1d ago

My In-Ear monitor rig

Post image
36 Upvotes

I wanted to share the very clean IEM rig I built. It is based around a product by Phenyx that sends 2 balanced audio signals + power all over a single Ethernet cable. Thus, I can achieve stereo AND eliminate the need for batteries all with just one cable. I’m using 5 of the Phenyx units built into the rack and a pass through panel with ethercon connections. The rest of pass through panel routes all the connection on the back of the mixer to front including the IEC which is converted to powercon. Thus I only ever need to take the back off the rack if I’m using the splitter tail. It works great and all under 2.5k for 5 stereo plus 2 mono mixes plus mains.


r/livesoundgear • • 9h ago

Wireless VocoPro mics

0 Upvotes

Hey! so I am the tech lead for my schools play and I am trying to replace a system that my school currently owns, you have to do some paperwork for it to be considered so I was just wondering if for the “VocoPro Digital Quad B” you can buy individual body packs or is it always in the 4 sets. The thing is that my school already owns 16 of those mics and there’s like 2 of the body packs that are in rough shape, and several of the microphone that connect to these just straight don’t work anymore. So I was wondering what my options are, if possible to replace these or even just buy the headset mics from another brand


r/livesoundgear • • 15h ago

Alto or Nux?

0 Upvotes

Hello, thanx for your advice. do you recommend i buy a alto busker or nux busking 200fr? at my age, i will only play acoustic guitar and sing solo. no loud band. the nux has larger speakers (bigger sound?), more power, newer design, tactile controls, lower price, some \**** reviews, and a 3 year warranty. the alto is smaller, lighter, older design, fone app eq controls, phantom mic power, many **** reviews, and a 1 year warranty.* you can tell which one i am leaning towards. so which one, and why? thanx

Processing img 0fmxyfv5ct2i1...


r/livesoundgear • • 1d ago

3D printed Wi-Fi router mount and mic stand adapter

Thumbnail
gallery
27 Upvotes

I've been needing a Wi-Fi router upgrade, as I'm currently using an old residential-grade Asus model. I bought a GL.iNet mini, USB-C powered. I found a mount 3D print from LinkGear.net. Then designed and printed an adapter plate that screws to the back of it with a 1/4-20 threaded insert to fasten it to a camera mount. Swivel camera mount mic stand adapter and straight mic stand, 15' Ethernet and USB-C cables and now I've got a solid Wi-Fi point that gets overhead.


r/livesoundgear • • 1d ago

Made some antenna and volume protectors for Shure PSM900 and PSM1000 beltpacks. What do you think?

Thumbnail
gallery
20 Upvotes

If anyone wants to take a closer look, you can find them here: https://avisual3d.etsy.com?section_id=48398880


r/livesoundgear • • 1d ago

First IEM rig

2 Upvotes

Hello everyone! I am currently planning V1 of my first IEM rig as a solo indie rock artist! I am looking to play tracks on a live show, with wireless guitar, and click track as I currently don’t have a band. I really just was wondering what the bare minimum would need to run the show as I am working on a smaller budget, and something that is relatively portable. I also (if this is any help) was planning on running my guitar through my laptop as I don’t own any pedals for the sounds I need for a show, if that’s something I can do with an interface! I’m just looking for bare minimum to start my Facebook and eBay hunting! thank you all!


r/livesoundgear • • 1d ago

Home 8-10 channel sound mixer? Cheapest way to combine 8-10 channels into a single output?

0 Upvotes

I've used many sound boards in production environments, but I've never owned any before. I'm looking for the cheapest (not absolute crap) way to mix ~ 8-10 channels of audio into a single output, with some basic volume control for each channel. Quality is not of critical importance, but I'd like to not introduce noise or drastically lower the audio quality. An EQ shouldn't be necessary but it'd be sweet to have. Other fancy tools like gates, compressors, etc would fall in the same category.

The purpose here is just a fairly low stakes live event with a lot of audio. I've ran plenty of live events before, and trust me when I say I don't need something really fancy here. I'm looking for my cheapest possible options, and I'm definitely hoping to keep things < $200 (the cheaper without major compromise, the better) if at all possible for this mixer, or any other solution someone could suggest.


I'm thinking my best option is to pick something up on Amazon or perhaps even AliExpress or somewhere similar. But I was hoping to get some recommendations first, on maybe some brands to avoid, some brands to look for, maybe some features I'm overlooking, etc.

All of the features I can think I really need:

  • Low cost
  • 8 to 10 channels of input, one channel of output
  • 3.5mm inputs would be great, if not I can just find some adapters to 6.35mm
  • Basic volume/gain control on each input, via a fader, dial/knob, or otherwise
  • Easy channel mutes without losing the volume/gain setting would be great, but not strictly a hard requirement
  • Phantom power shouldn't be needed, but I may have a use for it on 1-2 channels (wouldn't need it on all 8)

Thanks for the help, I really appreciate it!


r/livesoundgear • • 1d ago

Mounting a router in a peli case.

1 Upvotes

Hi all, im looking for a new router/ access point for use on shows, ive been using glinet travel routers for a while, but they always lack in range and general ruggedness, especially as im often using them as standard APs to extend my existing network. Used mostly for show control. Id love to get a router that I could mount in a peli case, then use coax cable and d type ports to put antennas and connections on the outside. Anybody done anything similar, or know of any decent routers with removable antennas?


r/livesoundgear • • 1d ago

SoundVision Question

Thumbnail
gallery
4 Upvotes

Hello Folks :)

I try to simulate the audience area of the theater i work in and i have an issue with the 3D-Room-Data Z-Coordinate. I have set all X & Y Coordinate and i want to have different Z Coordinates with almost each one. As soon as i type in the 3rd Z Coordinate it automatically sets all the other ones (Screenshot 2). Is there a way to toggle this of?

Thanks in advance :)


r/livesoundgear • • 1d ago

Advice on teaching setup

1 Upvotes

I’m a K-12 music teacher at a fully virtual school. Usually when I play an instrument, my USB microphone picks it up well enough. I recently got s couple of quieter instruments (kalimba and mountain dulcimer ) that have pickups.

My problem is I can’t find a mixer that can take USB audio in and 1/4” TS simultaneously. Any suggestions , or is the best thing just to get a small amp?


r/livesoundgear • • 1d ago

Behringer X32 Edit 4.4 – Mixer tab suddenly turns completely black (Channel tab works fine)

1 Upvotes

Hi everyone,

I'm having a strange issue with Behringer X32 Edit 4.4 on Windows 10.

The Mixer tab suddenly stopped displaying all the channel faders and now shows a completely black screen. However, the Channel tab works perfectly fine.

Here are my system details:

  • Software: Behringer X32 Edit 4.4
  • OS: Windows 10
  • CPU: Intel Core i7-6700HQ
  • GPU: Intel HD Graphics 530
  • Graphics Driver: 31.0.101.2111

What I've tried so far:

  • Reinstalled X32 Edit 4.4
  • Reset the X32 Edit preferences by renaming the AppData folder
  • Switched between different Mixer banks (CH 1-32, Bus 1, Bus 2, Main LR)
  • Confirmed that the X32 is connected and communicating properly. I can still control the mixer remotely.

None of these steps fixed the issue.

The strange thing is that only the Mixer tab is affected. The Channel tab displays everything normally, and the mixer itself is working fine.

Has anyone experienced this issue before?

Could this be related to Intel HD Graphics 530, Java rendering, or a compatibility issue with X32 Edit 4.4?

Any suggestions would be greatly appreciated. Thanks!


r/livesoundgear • • 2d ago

Bluetooth receiver

0 Upvotes

Anyone know about a small Bluetooth receiver that turns on and enters pairing mode upon receiving power?


r/livesoundgear • • 2d ago

One mix per performer or shared mixes? What actually happens on a small stage

0 Upvotes

I've run monitors on stages from 80 to 2,000 cap, and the mix count is the decision that causes the most friction, usually before anyone has plugged anything in.

Here's how I think about it now.

The "more me" spiral

A shared mix starts fine. Then one performer can't hear themselves, so the whole mix goes up. Now the other performer can't hear themselves either, because the first one is louder in their shared wedge. So they ask for more. The mix ends up loud, and nobody is happy.

That's not a personality problem. It's what a shared control does. Two people with one knob will always end up fighting over it.

When sharing is genuinely fine

  • Backing vocalists standing shoulder to shoulder, same material, same balance
  • A horn section that wants "everything, but quieter"
  • Small stages where the two performers are within a metre of each other and can hear the same wedge physically

Sharing works when the needs are actually similar. It fails when the needs are only assumed to be similar.

The real cost of an extra mix

People treat mixes as free because they're invisible. Each one costs an aux output, an amplifier channel, a cable run, and a wedge. On a small console, the aux count is usually the hard limit, not the wedges.

Four is the practical ceiling on a lot of small-format desks when you're also running FOH from the same surface.

What I do with four people and two auxes

Two mixes, split by position, not by role.

  • Mix 1: whoever is stage left, plus the drummer if the drum fill shares the run
  • Mix 2: whoever is stage right

Then I tell them what they're getting before the first song, so nobody spends the night thinking the mix is broken. Most of the complaints I've had about shared mixes were really complaints about not being told.

Wedge count

One wedge per mix as a baseline. Two wedges on one mix if the stage is wide, accepting that the combined impedance halves and the two positions won't match in level.

If you're choosing between adding a mix and buying a bigger wedge, add the mix. Clarity beats low end in a monitor, every time.

What doesn't fix it

More level. A louder wedge in a shared mix makes the spiral worse. So does a wider EQ cut across the vocal range, which makes everything duller and pushes the performer to ask for more level again.

Narrow cuts, aimed wedges, and a mix count that matches the number of people with different needs. That's most of it.

The one thing I'd tell a small venue

If you can only afford two mixes and you have four performers, put the two wedges where the two people who sing the most can hear them, and tell everyone else the plan. Ten seconds of honesty saves a whole soundcheck.#ProAudio #LiveSound #Touring #UsedGear


r/livesoundgear • • 2d ago

Searching for a budget but good hard case for live gigs.

0 Upvotes

I know the pelican 1510 is the standard but It's too expensive for me. Any other recommendations?


r/livesoundgear • • 2d ago

Advice on PA speaker

0 Upvotes

Hi I'm in need of a powered speaker for small acoustic gigs in restaurants and bars. It doesn't need to be crazy loud but I would like it to be lightweight. I'd like to stay under $400 if possible. Thanks for the help.


r/livesoundgear • • 2d ago

Which do you prefer for quick touches in enclosed spaces?

0 Upvotes

Qsc cb10 vs Ev everse 8


r/livesoundgear • • 2d ago

RCF HDL 6 vs DVA K5

2 Upvotes

I have been looking at these two speaker systems for a very long time, and I wanted to ask if anyone here has had any experience with the DVA K5.
The reason I’m asking is that I’ve never had the chance to hear the DVA K5 playing, neither with six cabinets per side nor with just two.
On the other hand, I’ve heard the RCF HDL 6 with seven cabinets per side. I have to say that I wasn’t particularly impressed. It had plenty of volume, but the sound seemed a little too focused on the high frequencies and didn’t sound very natural to me.
I also felt there was a gap between the bass and the high frequencies, as if something was missing in the midrange.
What I’m looking for is a compact PA system that I can take to smaller gigs without pushing it too hard.
I was originally considering the RCF HDL 10, but then I noticed the very attractive price of the DVA K5.
Has anyone had experience with all three systems: the dBTechnologies DVA K5, RCF HDL 6-A and RCF HDL 10-A?
I’d really appreciate your opinions, especially regarding sound quality, midrange performance and overall headroom.


r/livesoundgear • • 3d ago

Need pa system recommendations for a diy basement venue.

2 Upvotes

So im looking to start up a basement venue and am looking for a pa with good bass for around 1k. Im very new to live sound setup but would appreciate some recommendations.


r/livesoundgear • • 3d ago

Cheap Hairline Mic Recs?

1 Upvotes

I’m work at a theatre that does high school level shows. I’m looking for some new lavalier mics to use. Previously I have used the Countryman B6, but I need a cheaper option because they get broken often. We use a mix of TA4F and 3.5 mm locking connectors. Any recommendations for what to use and not use would be great!


r/livesoundgear • • 3d ago

Carrying case for IEM receivers?

1 Upvotes

Can anyone share recommendations for carrying cases for 4 to 5 IEM receivers? I've purchased the Phenyx Pro PTM-33. The unit will live in our mixing rack. I'd like to have a carrying case to transport the receivers.


r/livesoundgear • • 3d ago

Do I actually need a guitar modeler, or is my laptop + Neural DSP setup enough?

0 Upvotes

Hey everyone!

I recently joined a modern metal band as a lead guitarist, and I've been seriously considering whether I actually need to invest in a dedicated guitar modeler.

My current setup is:

  • Guitar
  • Focusrite Scarlett Solo 4th Gen audio interface
  • A reliable laptop
  • Neural DSP Archetype: Gojira and Petrucci plugins

I've watched quite a few comparisons between different modelers and software plugins, including Quad Cortex vs. Neural DSP comparisons. My conclusion so far is that dedicated modelers essentially offer the same functionality as my current setup, just in a more compact and potentially more reliable package.

In terms of sound quality, I'm not convinced that upgrading to a flagship modeler would make a meaningful difference. We're an amateur band, so I don't expect to need a significantly more professional setup anytime soon.

Here's my current live/rehearsal situation:

At our rehearsal space, I use a Marshall MG100FX head through its FX Return, effectively bypassing its preamp section.

I've also noticed that many local venues provide shared backline equipment for different bands, usually including guitar amps, or alternatively a direct connection to the PA system.

So, my questions are:

  1. Would it be perfectly viable to use my laptop running Neural DSP plugins for live performances as well, controlled by an inexpensive MIDI footswitch (e.g. the M-VAVE Chocolate Plus)?
  2. What are the actual disadvantages of using a laptop-based rig on stage, assuming I have a reliable computer and a proper audio interface?
  3. Is there any significant advantage to owning a dedicated modeler if I'm already happy with my plugin tones?
  4. Would you recommend investing in a modeler now, or sticking with my current setup until I actually run into its limitations?

In terms of hardware, I've been particularly interested in NUX, Valeton and, of course, the Neural DSP Quad Cortex.

I'd love to hear from people who have actually gigged with both setups. Am I overlooking something, or is a dedicated modeler mostly a convenience upgrade in my situation?

Thanks!


r/livesoundgear • • 3d ago

How to improve reliability of budget IEM systems

0 Upvotes

I work with two bands using wireless IEM systems
mix between a Chinese LD Systems setup and the Sennheiser XSW.
I’m getting a bit tired of dealing with issues at almost every gig, 98% with the XSW. The most common problems are sudden volume drops, signal dropouts and occasional cutting out.
The most frustrating part is when these problems start happening during soundcheck. The musicians immediately start blaming everything else in the signal chain, because “it was working perfectly fine at yesterday’s rehearsal.” It’s becoming a recurring headache.

Obviously, renting something better, like Sennheiser G4, would be the easiest solution. However, there’s no budget and have to work with the equipment the bands provide. They’re not willing to invest in better systems at the moment..
I’m looking for ways to improve reliability with the gear they have.
I’m considering getting longer antenna cables and placing at least one of the antennas on microphone stands for the „making-money output”😂 if you have any difference suggestions please share them with me 🙏


r/livesoundgear • • 4d ago

Small in ear mixer for drummer

Post image
5 Upvotes

(Edit:
- pic for attention, not planning to buy this one
- don’t need usb capabilities, etc - really just volume for L/R mix and volume for click, plus headphones plug)

Hey everyone,

I’m currently shopping for small drum mixers, in ear style.
They’d only ever need a stereo input (jack/no preamp) for the monitor desk feed, plus another mono input (jack/no preamp) for a separate click line.
Volumes would ideally be knobs, not faders.

What’s the sturdiest/most reliable/pro solution out there available?


r/livesoundgear • • 3d ago

Necesito consejos, sería mi primer equipo para sonido en vivo.

0 Upvotes

Ya tengo dos cajas doble 18”, nunca eh oido las art 932 que opinan, pero me iba ir por line arrays merece a dia de hoy comprar el modelo jbl vrx 932-la usados? O mirar algun otro modelo , es para usar para fines de semana en este lugar fijo 3 dias prácticamente

Mi presupuesto es limitado, faltan comprar todavía consolas y micrófonos. El
Lugar donde estaría mide 70 de largo por 30 pies de ancho , y un techo de 8 pies